Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterHow Much Does Gate Parts & Welding Cost in Fort Worth?
For most residential gate repairs and welding in Fort Worth, homeowners can expect to pay between $250 and $650 for standard labor and materials. A simple gate hinge weld might run as low as $180, while complex fabrication or structural repairs on heavy-duty estate gates can reach $1,200 or more depending on the extent of the damage and the specific materials involved.
We provide upfront pricing before we turn a single bolt. Because every gate is built differently and faces unique wear from the Texas climate, we do not guess on the phone. We assess the structure, identify the failure point, and give you a firm price for the repair. Call us at (817) 562-7979 to schedule an estimate if you need to restore your gate’s function or security.
Gate Parts & Welding Cost Breakdown (2026)
Pricing for gate work in Fort Worth depends largely on whether the issue is structural, such as a broken weld or a sagging post, or mechanical, such as a failed circuit board or a damaged gate opener. The following table provides a general range for common services we perform across Tarrant County.
| Service Category | Estimated Cost Range |
|---|---|
| Basic On-Site Welding Repair (Hinge/Latch) | $180 - $350 |
| Structural Fabrication (Post Reinforcement/Cross-Bracing) | $450 - $950 |
| Gate Opener Troubleshooting & Reset | $150 - $250 |
| Gate Opener Part Replacement (Board/Sensor/Chain) | $300 - $850 |
| Full Gate Alignment & Hinge Service | $350 - $700 |
| Emergency After-Hours Gate Service | $400 - $900 |
These numbers represent the cost to complete a professional, lasting repair. We do not believe in temporary fixes that require us to come back a week later. When we look at a gate, we consider the entire system. If a hinge has snapped, it is often because the weight of the gate is no longer distributed correctly, or the post has shifted in the soil. A simple weld that ignores the underlying cause will fail again, which is why we focus on fixing the root issue.
If you are looking for Gate Parts & Welding in Fort Worth, we advise you to avoid the cheapest bid. In our 42 years of business, we have seen too many homeowners pay twice for the same repair because the first technician did not address the structural integrity of the gate.
What Affects Gate Parts & Welding Pricing in Fort Worth
Several factors influence the final cost of your gate repair. Because we have been working in Fort Worth since 1984, we understand how our local environment impacts metal and mechanics.
- Soil Shifting: Fort Worth is known for its expansive clay soil. When the ground shifts after a heavy rain or a long, dry summer, your gate posts can lean. If your gate is dragging, the repair might involve more than just welding the hinge; it might require structural stabilization of the post.
- Metal Expansion and Contraction: The extreme temperature swings we see in North Texas cause steel to expand in the summer and contract in the winter. This puts immense stress on welds. A repair requires professional-grade welding that accounts for this movement, not just a quick tack weld.
- Gate Automation Complexity: We are trained on nine major brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. The cost of parts varies significantly between these manufacturers. A proprietary control board for a high-end estate gate will cost more than a universal receiver for a simpler system.
- Accessibility: If your gate is set back from the road or located on a steep incline, the labor required to move our equipment and perform the work safely increases. We always factor this into our upfront quote so there are no surprises on the bill.
- Age and Material of the Gate: Older iron gates may require custom fabrication if replacement parts are no longer manufactured. We have a full fabrication shop, which allows us to recreate hinges, latches, or decorative elements that you cannot buy off a shelf.
The Reality of Welding and Structural Safety
Welding is not just about melting metal; it is about metallurgy and load distribution. A gate is a heavy, moving object. When a weld fails, the gate becomes a safety hazard. It can fall, pinning a vehicle or causing injury to a person or pet. This is why we take our work so seriously. We are not just fixing a piece of metal; we are ensuring the safety of your property entrance.
If you have a gate that is sagging, dragging, or making a grinding noise, do not attempt to force it shut or prop it up yourself. High-tension springs and heavy steel components can cause severe injury if they release unexpectedly. Our technicians are background-checked and trained to handle these forces safely. We use professional equipment to secure the gate before we perform any welding or repairs. If you are unsure about the state of your gate, call us at (817) 562-7979. We would rather talk you through a safety concern over the phone than have you risk an injury.
How to Save on Gate Parts & Welding
We believe in a square deal. You want the job done right, and you want to pay a fair price for it. We offer several ways to manage the cost of your gate maintenance.
First, take advantage of our standing offers. We provide $50 off any repair over $250. This is a simple, direct discount that helps offset the cost of parts. We also offer a $89 seasonal tune-up. This is one of the most effective ways to save money in the long run. By catching a loose hinge or a misaligned sensor early, we can prevent a major, expensive failure later. A small adjustment today is always cheaper than a major repair tomorrow.
We also offer a 5% discount for seniors and veterans. If you are a veteran or a senior citizen, please let us know when you call. It is our way of saying thank you.
Finally, if you have received a quote from another company and you are not sure if the price is fair, call us for a free second opinion. We will look at the work they proposed and tell you, honestly, if it is necessary or if there is a more efficient way to handle the problem. We do not chase other companies’ prices; we stand by our own work, which is backed by our 90-Day Done Right Promise. If we fix it, and it fails within 90 days, we come back and make it right. No arguments, no paperwork.
Why Our 42-Year History Matters to Your Wallet
When Victor Salinas founded Ironworks Gate Co. in 1984, the goal was simple: provide honest work in a town we call home. We have seen a lot of changes in Fort Worth over the last four decades. We have seen neighborhoods grow, technology evolve, and gate systems become more complex. But the fundamentals of our business have not changed.
We do not use voicemail trees. If you call us at 2:00 AM because your gate will not close, you will talk to a live person. We know that a broken gate is not just an inconvenience; it is a security issue. You need to know that your property is secure, and you need to know when someone is coming to fix it. We provide that certainty.
Our technicians are uniformed and background-checked. When we arrive at your home, we treat it with the same respect we would our own mothers’ homes. We do not leave a mess, and we do not leave until the gate is operating as it should. We carry parts for the nine brands we service-LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule-in our trucks. This means we can often complete the repair in a single visit, saving you the cost of a return trip.
Understanding Your Gate System
To understand why repairs cost what they do, it helps to understand the components of your gate. A gate is a system, not just a slab of metal. It relies on the interplay between mechanical hardware and electrical automation.
The Mechanical Side
The mechanical side includes hinges, rollers, tracks, and the structural frame itself. In Fort Worth, we see a lot of hinge failure. The weight of the gate puts constant torque on the hinges. If the hinges are not lubricated, or if the gate has settled because of the soil, the hinges will snap or bend. Welding a new hinge onto an old, sagging gate is a temporary fix. We often have to reinforce the frame around the hinge to ensure the new metal has a solid foundation. This is why our fabrication shop is so important. We can cut, grind, and weld steel to match your existing gate structure perfectly.
The Electrical Side
The electrical side includes the gate opener, the control board, the sensors, and the power supply. These components are sensitive to power surges and the intense heat of Texas summers. A control board might fail because of a lightning strike or a simple power fluctuation. Sensors, which are critical for the safety of your gate, can get knocked out of alignment or fail because of insect infestation-a common problem here in Fort Worth. When we troubleshoot an electrical issue, we do not just replace parts until the gate works. We test the voltage, check the connections, and ensure the safety loops are functioning correctly. A gate that closes on a car because the sensors were not properly calibrated is a liability we will not accept.
FAQs - Gate Parts & Welding Cost
How much does it cost to weld a broken gate hinge in Fort Worth?
A standard on-site hinge weld typically costs between $180 and $350. This price includes the labor, the welding materials, and the safety preparation required to ensure the gate is secure during the repair. If the hinge has torn away from the post, we may need to reinforce the metal, which could slightly increase the cost, but we will provide an exact price before we begin.
Is it cheaper to repair a gate or replace it entirely?
In most cases, repair is significantly cheaper than replacement, often costing 70% to 80% less than a full installation. We can repair almost any gate, from simple iron garden gates to complex automated estate gates. We will only recommend a replacement if the structural damage is so severe that a repair would be unsafe or if the cost of the repair approaches the cost of a new gate. Call (817) 562-7979 for a free estimate on your specific gate.
Can you fix my gate opener the same day I call?
We prioritize repairs to ensure your property remains secure, and because we carry parts for nine major brands-including LiftMaster, FAAC, and DoorKing-we can complete most repairs in a single visit. While we cannot guarantee a specific arrival time for every call, we always do our best to get your gate back in service as quickly as possible. Call us now to see our current availability.
What is the 90-Day Done Right Promise?
The 90-Day Done Right Promise is our written guarantee that the work we perform will be done correctly. If the repair we performed fails within 90 days, we return to fix it at no additional cost to you. We do not hide behind paperwork or argue about the details. If it is not right, we make it right. It is the standard we have held ourselves to since 1984.
Do you offer discounts for seniors or veterans?
Yes, we offer a permanent 5% discount for all seniors and veterans. Please mention this when you call to schedule your service so we can apply it to your final invoice. We also have other standing offers, such as $50 off any repair over $250, which can be combined with our professional service to ensure you get the best value.
The Importance of Professional Maintenance
We often hear from homeowners who waited until their gate stopped working entirely before calling for help. By that point, a small, inexpensive fix has often turned into a major repair. For example, a gate that makes a grinding noise is usually a sign that the rollers or the chain are failing. If you call us when you first hear that noise, we can often lubricate, adjust, or replace a minor component for a fraction of what it costs to replace a burnt-out motor or a snapped chain.
Our $89 seasonal tune-up is designed to prevent these problems. During a tune-up, we inspect the entire system. We check the hinges for wear, lubricate the moving parts, test the safety sensors, and ensure the gate opener is operating within its manufacturer specifications. It is a proactive way to protect your investment and keep your gate running smoothly year-round. Think of it like an oil change for your car; it is a small, routine expense that keeps the whole system from breaking down when you need it most.
Our Commitment to Your Property
We are not a company that sends a random contractor to your home. We are a team of professionals who take pride in our work. When Victor Salinas started this company, he set a standard that we still follow today. We are the company that makes a 40-year-old gate close like the day it was hung. We know that your home is your sanctuary, and the gate is the first line of defense. We treat every job with the care and attention it deserves, whether it is a simple weld on a driveway gate or a complex repair on an automated estate entrance.
We are proud to serve the Fort Worth community. We have watched this city grow, and we have been here to support the homeowners who make this city what it is. We are not going anywhere. We plan to be here for another forty years, providing the same honest, reliable service we have always provided. When you call Ironworks Gate Co., you are not just getting a repair; you are getting the benefit of our experience, our integrity, and our commitment to doing the job right.
If you have questions about your gate, or if you need a repair, please do not hesitate to reach out. We are here to help, and we are happy to answer your questions. You can learn more about us on our home page or check out our detailed guide on Gate Parts & Welding in Fort Worth. We look forward to earning your trust.
Pricing reflects the Fort Worth market as of 2026. Ironworks Gate Co. offers free estimates - call (817) 562-7979.
What Our Customers Say
"Used them at two properties now. Both times they diagnosed it on the first visit instead of guessing and coming back."
- Rohan Shah"The repair is holding. He was quite a bit later than the window I was given and the office did not call me about it, I had to call them. The work itself was done well once he arrived."
- Ruben Morales"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Eric Padgett