Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Gate Motor & Opener for Fort Worth Homeowners
When a driveway gate motor quits in Fort Worth, it rarely fails at a convenient hour. You’re either locked in, locked out, or standing in the heat with a gate that groans halfway and stops. Gate motor repair in Fort Worth typically runs $180 to $470 depending on the failure, and most motor swaps are completed in a single visit. Since 1984, Ironworks Gate Co. has repaired and replaced gate openers across Fort Worth, and we answer the phone live, 24 hours a day, at (817) 562-7979. Victor Salinas leads a crew that shows up when promised, diagnoses honestly, and stands behind every job with a written 90-Day Done Right Promise.
What Our Gate Motor & Opener Service Includes
We work on the full scope of driveway and estate gate automation. Whether the opener needs a new control board, the arm has slipped out of adjustment, or the entire motor needs to be replaced, we handle it cleanly. Here’s what falls under our Fort Worth Gate Motor & Opener service.
Motor Installation
A new gate motor has to match the weight, length, and cycle frequency of your gate. We calculate all three before recommending a unit, because a motor sized wrong will burn out early even when the brand is reputable. Ironworks Gate Co. installs and programs the motor, sets the open and close limits, and tests the safety reverse under load so the gate stops when it should. A motor installation typically takes half a day on site, and we remove the old unit and leave the gate operating cleanly.
Motor Repair
When a gate opener fails and you need an Emergency Gate Motor & Opener in Fort Worth, TX, the problem is usually one of four things: the control board, the capacitor, the gear assembly, or the limit switch. We test each component rather than guessing, which is why most repairs are done in one visit. Victor has repaired openers on everything from 12-foot residential driveway gates to long commercial slide gates, and we carry common OEM parts on the truck. A repair that should take an hour stays an hour, not a three-visit saga.
Linear Motor
Linear motors use an arm that pushes and pulls the gate leaf in a straight line, and they’re common on residential swing gates throughout Tarrant County. The arm’s travel and the gate’s swing arc have to stay in sync, or the motor fights itself and burns out the gearbox. We set the arm throw, adjust the force settings, and confirm the gate opens fully without slamming at the end of its travel. If the arm is bent or the internal screw has stripped, we’ll tell you plainly and replace what’s actually needed.
Slide Motor
Slide motors use a chain or rack-and-pinion drive to move the gate along a track, and they depend on wheels that roll straight and a chain tensioned within spec. A slide gate that hesitates or jerks is almost always a tension or alignment problem, not necessarily the motor itself. We inspect the track, wheels, and chain before touching the motor, so we don’t replace an expensive opener when a $40 part and twenty minutes of adjustment would do it. When a slide motor is genuinely dead, we replace it with a unit matched to the gate’s weight and daily cycle count.
Intercom Integration
Many Fort Worth estates pair a gate opener with an intercom or phone-based entry system, and the two have to talk to each other correctly. We wire the opener’s trigger input to your intercom or telephone entry board so the open command fires reliably every time. That includes setting the relay timers so the gate doesn’t close on a visitor’s car. If the intercom is old and the opener is new, we match the voltage and relay logic rather than leaving a spliced-together tangle that quits working in a week.
Battery Backup
Power outages in Fort Worth come with spring storms and summer grid strain, and a gate opener without a backup becomes a dead weight. We install and wire battery backup modules so the gate continues to operate, typically for 24 to 48 hours of normal use, during an outage. We also replace aging batteries before they fail, because a three-year-old battery that tests weak is not going to survive the next big storm. A working backup is one of those things you don’t think about until the power goes out and the gate still opens.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Gate Motor & Opener
We’re factory-trained and equipped on nine gate-automation brands, and we stock OEM parts for the ones Fort Worth homeowners see most. Ghost Controls kits show up on a lot of newer residential installations, and we’ve installed and serviced enough of them to know their limit-setting quirks and the common control-board failures. When a Ghost Controls opener refuses to learn its limits or opens when it’s told to close, we fix it on the first visit rather than reading the manual in your driveway.
DoorKing and Elite are the workhorses on estate gates and long driveways across Tarrant County. We’ve repaired DoorKing slide-gate operators with worn drive chains and Elite swing operators with failing limit assemblies, and we keep the consumables for both in the truck. Mighty Mule is another common one on residential single-leaf gates, and we see a lot of failed control boards from lightning strikes during Fort Worth thunderstorm season. Whether your opener carries one of these names or any other make, we can diagnose and service it honestly.
Signs You Need Gate Motor & Opener Right Now
- The gate hums but doesn’t move. That hum is usually a failed capacitor or a stripped gear, and continuing to press the remote overheats the motor. It’s a small fix today and a burned-out motor next month if ignored.
- The gate opens halfway and reverses. This is often a force-sensitivity setting that’s drifted or an obstruction sensor going bad. Left alone, the opener starts working against itself and wears the gearbox fast. We set the force limits correctly and test the safety reverse.
- You have to press the remote several times. Intermittent response points to a receiver board, antenna, or worn remote. It’s one of the cheaper repairs we do, but the longer it flickers, the more likely the board is frying something downstream.
- The gate closes on cars or people. A safety edge or photo-eye that has failed is a genuine hazard, particularly with the weight of a steel driveway gate behind it. We treat this as an urgent repair, not a tune-up, because the safety reverse is not optional.
- The opener smells hot or trips the breaker. Electrical heat inside a motor housing means a component is drawing too much current. In Fort Worth summers, that becomes a fire risk as much as a gate failure. Kill power to the unit and call us; we’ll trace the draw before it does real damage.
Our Gate Motor & Opener Process - Step by Step
- 1
You call and a person answers. Not a voicemail tree, not an answering service. A live human picks up 24 hours a day, 7 days a week. You tell us what the gate is doing, we ask a few pointed questions, and we schedule a visit that works for you.
- 2
We show up and test before we touch anything. The technician checks voltage at the board, tests the capacitor, inspects the gear assembly, and watches the gate run through a full cycle. We use a multimeter and load test, not guesswork. The diagnosis is based on what the components actually read.
- 3
You get an upfront price, in writing. Before a single bolt is turned, you know exactly what the repair or replacement will cost. No open-ended labor, no surprise parts markup. If the fix isn’t worth doing, we’ll tell you that too and give you a straight recommendation instead of a padded invoice.
- 4
We do the work in one visit. Most motor repairs and many full motor replacements are completed the same day we arrive, because we carry OEM boards, capacitors, remotes, and gear assemblies for the brands we service. The gate is tested under load, the safety reverse is confirmed, and the limits are set so it opens and closes smoothly.
- 5
You get the 90-Day Done Right Promise in writing. Every job leaves with our guarantee: if it is not right, we come back and make it right, no paperwork, no arguing, no exceptions. Victor Salinas has run this company on that standard for over 42 years, and no job leaves the driveway without it.
How Much Does Gate Motor & Opener Cost in Fort Worth?
A gate motor repair in Fort Worth typically runs $180 to $470. That covers the most common failures: capacitors, limit switches, receiver boards, remote programming, and gear adjustments. A full motor replacement, including the new unit and labor, generally falls between $850 and $2,400 depending on the opener’s size, drive type, and brand. Slide motors for heavier steel gates run higher than linear swing-arm units, and estate-grade operators from DoorKing or Elite sit at the top of that range. Battery backup installation adds roughly $250 to $600 depending on the system. Every estimate is free, and every price is quoted and agreed before any work starts, so the number on the invoice is the number you approved.
What actually drives the cost is the gate’s weight and length, the condition of the hardware around the motor, and whether the existing bracket and track can be reused. A gate with rusted hinges or a sagging leaf will eat a new motor quickly, and part of our quote may include the hardware correction that saves you from paying for two motors. The surest way to avoid overpaying is to get the diagnosis done by someone who tests components rather than swapping parts. We’ll show you the failed part and explain why it failed.
Gate Motor & Opener Near Fort Worth - Our Service Area
We serve Fort Worth and the surrounding communities, including Benbrook, White Settlement, Saginaw, Haltom City, Richland Hills, Watauga, Lakeside, Briar, and Willow Park. From our home base in Fort Worth, we also take motor and opener calls in Gate Motor & Opener in Aledo and Gate Motor & Opener in Azle. Most Fort Worth calls see a technician the same day, and the surrounding cities typically run next-day for non-emergency work.
Serving Fort Worth, TX - Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Gate Motor & Opener in Fort Worth
A gate motor and opener is the powered unit that swings or slides your driveway gate open and closed automatically, typically triggered by a remote, keypad, or intercom system. It includes the motor itself, a control board, safety sensors, and the drive mechanism (arm, chain, or rack). We install, repair, and maintain all of these components for Fort Worth homeowners, and we’re known for the Best Gate Motor & Opener in Fort Worth, TX.
Most gate motor repairs are completed in a single visit that takes one to three hours. A full motor replacement usually takes half a day on site, including removal of the old unit, installation of the new opener, limit setting, and safety testing. We carry common OEM parts on the truck so the job does not stretch across multiple visits.
A typical repair runs $180 to $470, and a full motor replacement runs $850 to $2,400 depending on the gate’s size, drive type, and brand. Every job is quoted and agreed in writing before work begins, so there are no surprises on the bill. Call (817) 562-7979 for an exact quote; estimates are free.
Yes. We’re factory-trained on DoorKing, Ghost Controls, Elite, and six other major brands, and we keep OEM parts for all of them on the truck. Whatever name is on the motor housing, we can diagnose it correctly and repair it in most cases the same day. We do not have to “send it out” or make you wait on a dealer.
In most cases, yes. We keep Fort Worth same-day availability for gate motor failures and a person answers the phone 24 hours a day, 7 days a week. If the gate is stuck open or closed and you cannot secure your property, call (817) 562-7979 and we will get a technician dispatched as quickly as the schedule allows.
Every job is covered by our written 90-Day Done Right Promise. If something is not right, we return and make it right, with no paperwork and no argument. That guarantee sits on top of the manufacturer’s warranty on any new opener we install, and it applies to every job, every time.
Clear a path to the opener and have the gate disconnected from power if it is safe to do so, but don’t force the gate open or closed if it is binding. Make a note of what the gate was doing right before it failed: humming, jerking, reversing, or not responding at all. That saves us time and gets the repair done faster, but if you can’t manage any of it, don’t worry; we’ll handle it on arrival.
Schedule Your Gate Motor & Opener Service in Fort Worth Today
If your gate opener is acting up or dead altogether, call Ironworks Gate Co. at (817) 562-7979. A live person answers, we’ll schedule a visit that works for you, and the price is quoted and agreed before any work starts. Done right, backed in writing, and here for Fort Worth since 1984.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Fort Worth since 1984.