Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Hurst
Gate motors in Hurst fail for reasons most contractors never mention: clay soil shifts posts out of alignment, lightning takes out control boards, and the wrong repair leaves you calling back a month later. Ironworks Gate Co. has been fixing and installing gate automation across Tarrant County for over 42 years, and we approach every Gate Motor & Opener job in Hurst with that history behind us. A live person answers at (817) 562-7979 24 hours a day, 7 days a week, and our technicians arrive in Hurst knowing exactly what the local ground does to your gate.
We don’t guess at fix times or pad a quote. We give you a written price before any bolt is turned, do the work right the first time, and back it with a written 90-Day Done Right Promise. That’s how a gate should be handled.
Why Ironworks Gate Co. Is Hurst’s Preferred Gate Motor & Opener Company
Hurst homeowners have lived in their homes for twenty, thirty, sometimes forty years. They’ve seen contractors come and go. We’ve been here since 1984 because we don’t play quick-turn, low-quality games. Our crews service Hurst neighborhoods like Bellaire, Cavender, and the streets surrounding the Hurst Conference Center, and we know these homes: slab foundations, clay soil, generous lots, and gates that have been through decades of Texas weather.
What that means for you: we understand why a spring breakdown near Precinct Line Road behaves differently than one over in Bedford, and why the clay under your posts requires a deeper footing than a typical DFW install. We’re trained and equipped on nine gate-automation brands including Linear, Viking, Ghost Controls, and DoorKing, which means the correct fix happens on the first visit whatever is sitting on your driveway. We also stand behind every completed job with our 90-Day Done Right Promise, written, no paperwork, no arguing. If it’s not right, we come back and make it right.
Victor Salinas leads our team, and he holds every one of our technicians to a simple standard: the 400th job gets the same care as the first.
Our Gate Motor & Opener Services in Hurst
If your gate opener chatters, binds, or refuses to close at 11pm, that’s a problem for your security and your morning leave. Here’s what we handle in Hurst daily, from minor repair to full replacement.
Motor Installation
A gate motor installation in Hurst isn’t a bolt-on job. When we install a new operator, we’re looking at the post footings first, because we know from experience how clay-heavy Hurst soil shifts everything. We set the operator, run the power, install safety photocells and loop detectors, program remotes, and test the reversal function per UL 325 before we leave. New motor installations on a Hurst swing gate typically run $1,850-$3,200 depending on gate weight and length. Slide gate installations run higher, usually $2,400-$4,100, because of the greater steel and travel involved. We schedule installations carefully. We don’t rush them, and we don’t promise same-day turnaround. You get a measured date, a written price, and a complete job.
Motor Repair
Most Hurst motor repairs fall into two categories: electrical or mechanical. The most common we see: a swing motor burning out because the post shifted and the operator jammed; a slide motor grinding because clay dust worked into the gear rack; a control board fried after a flat-lot lightning strike near the mid-cities. We diagnose on-site and carry common parts for Linear, Viking, and DoorKing operators in our service vehicles, so most repairs complete in a single visit. Motor repair in Hurst typically runs $220-$480 for a capacitor, limit switch, or control board replacement, and $950-$1,600 if the motor itself needs replacing. The price is always quoted and agreed before we touch your gate.
Linear Motor
The term “linear motor” sometimes gets confused with slide or ram operators. In practice, when Hurst homeowners say linear motor, they’re usually talking about a slide-gate operator that moves the gate along a straight track. We service the Linear brand specifically and linear-drive systems generally. If your slide gate has started jerking after rain, the likely culprit is fine clay dust packed into the rack teeth or a misaligned chain. We clean the rack, check chain tension, and set the limit switches so the gate stops square. A linear-drive repair in Hurst runs $190-$390 for a minor fix, $1,200-$2,800 for a full operator replacement.
Slide Motor
Slide gates are everywhere in Hurst, especially on properties with shorter driveways or wider openings that a swing gate can’t practically span. Slide motors work harder than swing motors because they manage more moving mass. We service the entire slide operator: motor, chain or belt drive, rack, idler pulley, and limit switches. We also check the track for debris and derailment wear. If your slide gate is groaning or slipping, calling at the first sign saves you a much larger repair later. A full slide motor install in Hurst, including operator, rack, and safety loops, lands between $2,400 and $4,100 for most residential lots.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Hurst
We’re certified and equipped on nine gate-automation brands, so the correct fix is made on the first visit whatever is on your driveway. For our Hurst calls, the brands we see and service most are Linear, Viking, Ghost Controls, and DoorKing. We stock common replacement parts for these brands locally, which shortens wait times for Hurst customers and means fewer second trips. If your opener is an older model or a lesser-known brand, bring it up on the call. We’ll tell you straight whether it’s worth repairing or if replacement makes better sense long-term.
Common Gate Motor & Opener Problems We See in Hurst Homes
These are the failures we see repeatedly in Hurst. Each one has a local reason behind it.
- Posts out of plumb from clay soil movement. Hurst sits on expansive clay that swells when wet and shrinks when dry. Post footings that were too shallow, which is most of them, allow hinge posts to lean over a season or two. A leaning post binds a swing arm and burns the motor out.
- Lightning damage to control boards. Flat, exposed lots across central Hurst give lightning an easy path to the control board. Systems without dedicated surge protection regularly lose a board after spring storms. We recommend surge protection on every install we do in Hurst, because the alternative is a $300 board replacement after the next front rolls through.
- Clay dust in rack and pinion slide gates. Hurst’s fine clay soil gets airborne in dry stretches and settles into the rack teeth on slide gates. It acts as an abrasive and causes jerky, grinding operation. Regular cleaning and lubrication is not optional here, it is the difference between a smooth gate and a shredded rack.
- Undersized operators on heavy ornamental gates. Many of the iron gates in Hurst’s established neighborhoods are custom-made and heavier than stock hardware. A box-store operator gets installed, works hard for a year, and gives up. We size the operator to the actual gate weight and duty cycle.
Pricing for Gate Motor & Opener in Hurst, TX
Here’s what our Hurst customers typically pay, in real numbers, not vague ranges designed to fill space.
- Gate motor repair in Hurst: $220-$480 for most board, capacitor, limit switch, or photocell issues.
- Full swing gate motor replacement: $950-$1,850 for the motor, depending on brand and gate weight.
- Complete swing gate motor installation: $1,850-$3,200, includes post inspection, operator, photocells, and programming.
- Complete slide gate motor installation: $2,400-$4,100, includes operator, rack, and safety loops.
- Safety photocell or loop detector integration: $190-$350 per device, often added when replacing an older operator that lacks these.
- Battery backup system: $380-$650 installed, sized to your operator’s draw.
- Seasonal tune-up: $89, including rack cleaning, lubrication, limit testing, and safety function verification.
What moves a price in Hurst: gate weight, post condition, the length of the power run from your panel, and whether your existing operator can be reused. You’ll know the full price before work starts. Always. Call (817) 562-7979 for a free estimate, or to book a free second opinion on any written quote you’ve received from another company. We also offer $50 off any repair over $250 and a standing 5% discount for seniors and veterans.
We Also Serve Cities Near Hurst
Our Hurst crews also cover Hurst neighbors in Bedford, North Richland Hills, Haltom City, and Fort Worth. If you’re just outside the Hurst line, call (817) 562-7979 and ask, dispatch is coordinated from our Dallas-Fort Worth office to reach you quickly. Same live answer, same 90-Day Done Right Promise.
Serving Hurst, TX - Our Local Coverage Area
We’re based in the Hurst area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Hurst
In Hurst’s clay soil, we set operator post footings at 36 inches minimum, with a wider base than a standard DFW install. Most original post footings in Hurst are 24 inches or less, and the expanding clay pushes them out of plumb within a couple of seasons. A deeper, wider footing anchors the post so the rack and pinion or swing arm does not bind. If your gate already shifts, call (817) 562-7979 and we’ll tell you whether the post can be re-seated or needs a full reset.
We do install solar gate operators in Hurst, but we’re honest about the trade-offs. Solar works best for lighter single-swing gates in open sun, and Hurst’s clear skies help. But heavy ornamental gates or dual operators attached to a family coming and going all day often outpace what a solar panel can feed a battery bank. We’ll tell you straight on the phone whether solar is viable for your specific gate or whether a hardwired run, possibly with battery backup, is the better long-term solution. Estimates are free.
Rain in Hurst loosens fine clay from the ground, and that dust finds its way into the rack teeth on your slide gate. The clay acts as grit, and you’ll hear and feel it as jerking or grinding. Over time it accelerates rack wear and can damage the drive gear. The fix is a thorough rack cleaning and re-lubrication, and we also check chain tension and limit settings while we’re out. Our $89 seasonal tune-up covers exactly this kind of cleaning several times a year in Hurst.
Yes. We wire and program your existing keypad, intercom, or access control system into the new operator on the day of installation in Hurst. We carry the receivers and wiring to match Linear, Viking, Ghost Controls, and DoorKing operators, and we test every entry point before we leave, including the keypad, remote, push button, and any vehicle loop detector. If you have an older intercom system, we’ll tell you up front whether it’s compatible or needs a small adapter.
Most motor installations in Hurst are scheduled within 7 to 14 days, depending on the operator and the extent of ground and power work. A straightforward operator swap on existing posts can often be done in a single day. A full installation with new posts, a power run, and safety devices may take one to two days on site. We do not promise same-day installation because a proper Hurst install includes deeper footings and post curing, and rushing that defeats the purpose. Call (817) 562-7979 and we’ll give you a measured date and written price before any work begins.
One more thing, because it matters in Hurst specifically. We recently replaced a failed FAAC swing gate operator at a home near Bellaire Drive. The original post footing was only 24 inches deep, and the clay had pushed the hinge post out of plumb, causing the motor to strip its gear. Our crew poured a new 36-inch footing, re-seated the post, and installed a new FAAC 750 with safety photocells, tested reversal per UL 325 before we left. That’s the difference between a gate repair that lasts a season and one that lasts a decade. You get the same approach on every gate we touch in Hurst.
Contact Ironworks Gate Co. in Hurst
If your gate is acting up in Hurst, call (817) 562-7979 now for a free estimate. A live person answers, not a voicemail tree. We’ll talk through what you’re hearing, book a visit at a time that works for you, and quote the price before any work starts. Done right and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Hurst since 1984.