Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Fort Worth
Gate repair in Fort Worth usually costs between $145 and $480, and most jobs are done in a single visit. That range covers everything from a hinge adjustment to a full post reset. If your gate drags, won’t latch, or the operator just hums and does nothing, call Ironworks Gate Co. at (817) 562-7979 and a live person will answer, day or night. We serve every corner of Fort Worth, from Wedgwood to Alliance, and our trucks are on the road here every day.
The gate on your driveway was likely hung years ago, before modern safety edges and photo-eyes existed, and the Blackland Prairie clay under your posts has been shifting beneath it the whole time. We know how those two facts combine to cause failures. The fix often isn’t the motor. It’s the post it’s bolted to.
Why Ironworks Gate Co. Is Fort Worth’s Preferred Gate Repair Company
We’ve been repairing gates long enough to know that Fort Worth is different from the cities around it. The soil here moves. A gate that worked fine in spring can drag by August, not because anything broke, but because the clay under the post shrank in the heat and pulled the whole assembly out of line. Most repair companies adjust the hinges and leave. We check post plumb on every call, because we know that’s what actually failed.
Our crews work across Fort Worth every week, so we can usually reach most neighborhoods the same afternoon we take the call. We’re familiar with the 1950s ranches in Ridglea, the HOA automated gates in Walsh Ranch and Presidio, and the agricultural pipe gates on the horse properties scattered through the city’s north and far west reaches. That local knowledge means we show up knowing what we’re likely to find, and the truck is stocked for it.
Every job we complete is covered by our 90-Day Done Right Promise. It’s written, it’s simple, and if something isn’t right, we come back and make it right. No paperwork, no argument. Victor Salinas, our owner, built the company around that standard. The 400th gate gets the same care as the first one we ever touched.
Our Gate Repair Services in Fort Worth
Here’s what we handle most often in Fort Worth. If you don’t see your issue listed, call (817) 562-7979 and describe it. We’ll tell you honestly whether it’s worth repairing.
Electric Gate Repair
When an electric gate won’t open, the cause is usually one of three things: a dead capacitor, a failed control board, or a safety sensor that’s dirty or out of alignment. In Fort Worth, the heat accelerates capacitor wear. A 105°F summer afternoon is hard on electronics mounted inside a metal box. We troubleshoot the full circuit, not just the symptom, and we’re trained on nine automation brands, including Viking, Ghost Controls, DoorKing, and Elite. If the board is obsolete, we’ll show you a retrofit that costs less than replacing the whole operator.
Older operators from the 1990s and early 2000s often lack modern UL 325 entrapment protection. We can retrofit photo-eyes and safety edges onto most existing systems, and we’ll tell you plainly if the operator is past the point where that makes financial sense.
Automatic Gate Repair
Automatic gates that open halfway, reverse for no reason, or trip the breaker need more than a sensor cleaning. Fort Worth’s temperature swings, from hard freezes like Uri to triple-digit summers, cause steel frames to expand and contract enough to throw gear racks out of alignment. Add clay soil movement, and a slide gate that never gave you trouble suddenly binds every other month.
We set the limits, re-tune the force settings, and check the gear rack alignment as part of every automatic gate repair. We also inspect the loop detector, because we’ve seen Fort Worth sprinkler systems cause false triggers that drain the operator and burn out the motor over time.
Hinge & Post Repair
This is the repair Fort Worth needs more than any other city we work in. The Blackland Prairie clay under your gate posts swells after heavy rain and shrinks during dry spells. A correctly installed post can tilt three to five degrees within two or three seasons. When that happens, the gate drags, the latch won’t catch, and no hinge adjustment will hold because the problem is in the ground, not the gate.
On a 1960s ranch-style home in Wedgwood, our crew found a LiftMaster slide gate operator throwing error codes every dry spell. The motor was fine. The hinge post had pulled four degrees out of plumb as the clay shrank, binding the rack and pinion. We reset the post footing, re-shimmed the operator, and re-tuned the loop detector so the gate wouldn’t false-trigger when the sprinklers kicked on. That’s a typical call in Fort Worth.
We reset posts with properly compacted fill and, where needed, deeper footings designed for expansive soil. The goal is a post that stays plumb for years, not a quick fix that fails next season.
Gate Realignment
A gate that drags, scrapes the concrete, or won’t close without a shove is out of alignment. Sometimes it’s sagging hinges on a heavy wrought-iron gate. Sometimes it’s a post that moved. Sometimes the gate itself was fabricated slightly off-square and has been getting worse for a decade. We measure, identify what moved, and correct it at the source. A realignment that doesn’t address the post will not last in Fort Worth soil.
Lock Repair
Mechanical locks, keypads, mag locks, and manual slide-bolt latches all fail over time. If your gate locks but doesn’t latch securely, or the keypad works when it feels like it, we’ll replace or repair the hardware and make sure the alignment is correct so the lock engages cleanly. Most lock repairs on single gates run $95 to $260, including parts.
Weld & Rust Repair
Fort Worth’s humidity and the wet/dry cycles of the clay soil accelerate rust on gate frames, especially at the bottom rail and hinge welds. We grind out the rust, weld reinforcements where the metal has thinned, and prime and paint the repair so it blends in. For ornamental iron gates that were built well in the first place, a good weld repair can add another 15 to 20 years of service. For gates that are rusted through in multiple places, we’ll tell you honestly if replacement is the better use of your money.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Fort Worth
Our techs are trained and equipped on nine gate-automation brands, so the correct fix happens on the first visit, whatever is mounted on your driveway. That includes Viking and Ghost Controls, two brands we see frequently on Fort Worth ranch properties, and DoorKing and Elite, which are common on HOA and estate gates in the Alliance and Walsh Ranch areas. We keep common control boards, photo-eyes, and receiver modules in our trucks, which means most Fort Worth repairs don’t wait on parts.
If you have an operator that was installed ten or twenty years ago and the manufacturer has discontinued the board, our Gate Repair team can usually retrofit a modern equivalent. You don’t have to buy a whole new operator just because one component became obsolete.
Common Gate Repair Problems We See in Fort Worth Homes
These are the failures we see week after week across Fort Worth. If one sounds familiar, call us before it gets worse.
- Post heave and tilt from clay soil. The Blackland Prairie clay swells after rain and shrinks in heat, tilting gate posts three to five degrees within a few seasons. The gate drags or won’t latch even though the panel looks straight.
- Obsolete control boards on legacy operators. Many Fort Worth homes still run operators installed in the 1990s and 2000s. When the board dies, the manufacturer may have discontinued it. We retrofit modern boards onto existing mechanisms for far less than a full replacement.
- Gear rack misalignment from temperature swings. Fort Worth’s range from 105°F summers to hard freezes like Uri makes steel frames expand and contract enough to throw slide gate racks out of alignment. The operator strains, trips, or fails entirely.
- Dead or bypassed safety sensors. Older operators lack modern UL 325 entrapment protection. Photo-eyes may be dead, disconnected, or bypassed by a previous handyman. That leaves the gate unsafe and the homeowner liable. We restore or retrofit proper entrapment protection on every automatic gate we touch.
Pricing for Gate Repair in Fort Worth, TX
Gate repair pricing in Fort Worth runs from about $145 for a basic hinge adjustment or sensor alignment up to $480 or more for a full post reset with a deeper footing and re-welding work. Here’s what you can expect for common repairs:
- Hinge and latch adjustment: $145-$240
- Electric gate repair (capacitor, limit switch, sensor): $185-$390
- Control board replacement or retrofit: $320-$850 depending on brand and board type
- Post reset with deeper footing: $340-$620 per post, depending on gate weight and access
- Weld and rust repair: $160-$450 depending on how much steel needs attention
- Full gate realignment: $190-$360
These are honest Fort Worth market numbers. You’ll get an exact price in writing before any work starts, and that’s the price you’ll pay. No surprises on the bill. We also offer a Free Second Opinion on any written estimate, $50 off any repair over $250, and a permanent 5% Senior and Veteran discount. Call (817) 562-7979 for a free estimate.
We Also Serve Cities Near Fort Worth
Our crews regularly work the communities around Fort Worth, including Haltom City, North Richland Hills, Hurst, and Kennedale. If you’re just outside the city line, give us a call. We’ll let you know when we can be there, and the same 90-Day Done Right Promise applies wherever the gate is.
Serving Fort Worth, TX - Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Fort Worth
The clay soil under your gate post swells when it rains, and that swelling pushes the post out of plumb. When the post tilts even three or four degrees, the gate panel starts dragging on the ground or binding at the hinges. The rain didn’t break your gate. It moved the post. The fix is a plumb check and, where needed, a post reset with compacted fill that resists the cycle. Call (817) 562-7979 and we’ll diagnose it on the first visit.
In most cases, you can retrofit. We install modern photo-eyes and safety edges on older operators as long as the drive mechanism and motor are still sound. If the control board is obsolete, we can often retrofit a modern board onto the existing motor. The time to replace the whole operator is when the drive mechanism itself is worn or the gate is heavy enough to be unsafe with the old design. We’ll show you the numbers for both options and let you decide.
It can be. Freezing temperatures cause metal frames to contract, which can bind a slide gate against its rack or pull a hinge out of line. Ice can also lock the gate to the ground or the track. If the gate still won’t move smoothly after the thaw, the freeze likely shifted something. We check the gear rack alignment, hinge tension, and post plumb. A freeze is often the trigger, but the underlying issue is usually something that was already drifting.
Every two to three seasons, at minimum. Fort Worth’s Blackland Prairie clay can tilt a correctly installed post three to five degrees in that time, especially if there have been heavy rain seasons followed by dry heat. We check post plumb on every service call at no extra charge. For a more thorough look at the whole system, our $89 seasonal tune-up includes a full post and alignment check along with operator service.
The soils are different and the gates are different. Wedgwood and Ridglea homes often have 1950s to 1970s ornamental iron gates on clay that shifts seasonally, so post tilt and worn hinges are the dominant problems. Ranch properties near Alliance more often have heavier pipe gates on Viking or Ghost Controls operators, where the issues tend to be motor strain, battery backup failure, and rust at the weld joints. We stock parts for both types and we’re comfortable working on either. Call (817) 562-7979 to describe your gate and we’ll tell you what we’d expect to find.
Call Ironworks Gate Co. for Gate Repair in Fort Worth
If your gate is dragging, not latching, or the operator won’t run, don’t wait for the next rain or the next heat wave to make it worse. Call (817) 562-7979 and a live person will answer, 24 hours a day, 7 days a week. We’ll give you a straight answer, a written price before any work starts, and a gate that works like it should. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Fort Worth with pride.