Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Fort Worth
Gate parts and welding in Fort Worth usually means one of three things: a hinge that has torn loose, a post that has tilted out of plumb, or a frame that needs a real weld, not a patch. Our crews handle all three, and we stock the common steel profiles, hinge barrels, and rack sections on the truck so most Gate Installation - Fort Worth calls are finished in one visit. We have been fixing driveway and estate gates across Fort Worth for over four decades, and we understand what the local Blackland Prairie clay does to a gate post. Call (817) 562-7979 and a live person answers, day or night.
Why Ironworks Gate Co. Is Fort Worth’s Preferred Gate Parts & Welding Company
Fort Worth homeowners call us because we show up prepared. Many of the gates we service sit in established neighborhoods like Wedgwood, Ridglea, and the Hulen corridor, where original wrought-iron work from the 1960s and 1970s has finally outlived its hinges and hinge posts. We carry replacement hinge barrels, weld-on plates, and post stock that matches the existing iron profile, so we do not have to special-order a part and schedule a second visit.
Our Gate Parts & Welding team has worked on everything from ornamental driveway gates in Tanglewood to heavy agricultural pipe gates on ranch-style acreage along the city’s edges. The common thread is the soil. Fort Worth sits on expansive clay that swells after rain and shrinks during dry spells, and that movement works against every gate post in town. We check plumb on every call, because a gate that drags after a storm is almost never a hinge problem. It is a post problem.
Every technician who arrives at your Fort Worth home is background-checked and uniformed, and every job is protected by our written 90-Day Done Right Promise. If it is not right, we come back and make it right. No paperwork, no arguing.
Our Gate Parts & Welding Services in Fort Worth
Hinge Replacement
On older Fort Worth homes, the original weld-on hinges are often the first thing to fail. The gate itself may still be solid, but the hinge barrel has worn oval from years of use, or the hinge plate has cracked at the weld. We cut off the old hinge, grind the post and frame clean, and weld on a new hinge that matches the gate’s weight and swing. On ornamental iron gates in neighborhoods like Ridglea, we carry pintle-style and barrel hinges that match the original look so the repair does not stand out.
Post Replacement
This is the most common welding-adjacent repair we do in Fort Worth, and it usually traces back to the clay. A gate post that was set in a shallow concrete footer will tilt as the surrounding soil heaves and settles. The tilt then makes the gate drag, the latch miss the strike plate, and the automated operator struggle. We pull the old post, dig a deeper footing with gravel drainage at the base, set a new steel post, and weld the hinge mounts in place. The gate hangs square and the latch catches like it should.
Rail Repair
Gate rails crack at stress points, especially on long driveway gates with a lot of leverage at the center. A cracked rail is a structural problem, not a cosmetic one. We clean the break, bevel the edges, and run a full-penetration weld, then plate the inside if the rail has rusted thin. For Fort Worth homes with automated gates, a cracked rail also throws the Fort Worth Gate Motor & Opener travel limits off, which is why the fix usually includes re-adjusting the open and close stops after the weld.
Custom Welding
When a gate section is rusted beyond repair or a homeowner wants to match an existing ornamental pattern, we fabricate the replacement in our shop and weld it on site. That includes curved top rails, decorative scrollwork, spear finials, and custom latching hardware. For Fort Worth homes governed by an HOA, we work from the approved drawings or match the existing style so the finished gate passes architectural review. We have welded matching sections for gates in Fort Worth neighborhoods where the original ironwork dates back to the 1960s, and the repair disappears into the design.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Fort Worth
Most gate welding and parts work is brand-neutral, but the hardware around it is not. We stock and service parts for Linear, Viking, and DoorKing operators, plus Ghost Controls repair in Fort Worth, which are common on Fort Worth’s gated communities and ranch properties. That matters when a hinge or post replacement requires re-syncing the operator’s travel limits, or when a resident’s remote needs to be reprogrammed after we re-hang the gate. One crew, one visit, and the operator works with the new geometry.
Common Gate Parts & Welding Problems We See in Fort Worth Homes
- Post tilt from clay expansion. The Blackland Prairie soil under Fort Worth swells after heavy rain and shrinks in summer heat, and a post that was correctly set two years ago can be 3 to 5 degrees out of plumb today. No hinge adjustment fixes a tilted post. It has to be reset.
- Worn hinge barrels on older ornamental gates. Homes built in the 1950s through 1970s in Wedgwood, Ridglea, and along Hulen often still have the original iron gates. The hinges are usually wallowed out from decades of swing cycles, and the gate sags enough to scrape the ground or miss the latch.
- HOA-driven delays that make small problems worse. In gated communities around Alliance, Walsh Ranch, and Presidio, a homeowner can wait months for architectural approval to replace a gate or post. By the time we are called, the operator has been fighting a sagging hinge for so long that the motor or limit switches are also worn.
- Cracked rails on long automated gates. North Texas temperature swings from 105°F summers to hard freezes expand and contract metal frames, and long slide or swing gates concentrate that stress at the rail joints. A hairline crack grows into a full break, and the gate’s travel limits drift until the opener errors out.
Pricing for Gate Parts & Welding in Fort Worth, TX
We quote every job upfront, in writing, before we touch a bolt. A single weld-on hinge replacement in Fort Worth typically runs $180-$320, depending on the gate’s weight and whether we need to remove the gate from the post. A full hinge set on a double driveway gate runs $340-$600. Post replacement is the bigger job: pulling and resetting one steel gate post with a deeper concrete footing and gravel drainage runs $650-$1,100, and most Fort Worth homes need one post replaced rather than two. Custom welding projects like a matching ornamental panel or a new curved top rail run $400-$1,400, quoted from your drawings or our field measurements. Rail repair with a full-penetration weld and a backing plate runs $225-$500 per rail. The price we quote is the price you pay, settled before any work starts, and every job carries the 90-Day Done Right Promise in writing. We also offer a free second opinion on any written estimate from another Fort Worth company, plus a $50 discount on any repair over $250 and a permanent 5% senior and veteran discount.
We Also Serve Cities Near Fort Worth
Our crews are on the road across the metro every day. Beyond Gate Parts & Welding in Fort Worth, we regularly handle hinge, post, rail, and custom welding work in Haltom City, North Richland Hills, Hurst, and Kennedale. Call (817) 562-7979 and we will get you on the schedule for the next available crew in your area.
Serving Fort Worth, TX - Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Fort Worth
In most Fort Worth communities with a governing HOA, yes, replacing a gate post requires architectural approval because the post is part of the gate’s finished appearance. Many HOAs also have an approved materials or finish list. We have worked with management companies across Fort Worth, including communities around Alliance and Walsh Ranch, and we can provide the drawings, dimensions, and Gate Access Control in Fort Worth finish specifications your HOA requests. The approval process is often the longest part of the job, so we recommend starting it before the gate becomes unusable. Call (817) 562-7979 and we can help you understand what your specific HOA will ask for.
The gate drags after rain because the ground under the post has swollen. Fort Worth sits on Blackland Prairie expansive clay that absorbs water and expands, lifting the soil around the post footing. That tilts the post and pushes the gate down on the latch side. When the soil dries, the clay shrinks and sometimes the gate returns to almost-normal, which is why the problem seems to come and go. The permanent fix is to reset the post in a deeper footing with gravel drainage so the clay cannot heave it. A hinge adjustment alone will not hold. Call (817) 562-7979 for a post inspection and a written repair plan.
Yes, and we do it regularly across Fort Worth. We take field measurements of your existing gate, match the steel profiles, and fabricate the replacement section or full gate in our shop before welding it on site. For HOA-governed properties in Fort Worth, we work from your approved plans or match the existing pattern exactly so the finished piece does not conflict with architectural standards. This covers curved top rails, scrollwork, spear finials, and matching latch hardware. Call (817) 562-7979 with your HOA’s approval documents and we will quote the job from our measurements.
Yes, residents’ remotes will continue to work after a rack replacement, because the remotes communicate with the gate operator’s receiver, not with the rack itself. The rack is the toothed rail the operator’s gear runs along, and replacing it does not change the wireless codes. What can happen with shared entry systems in Fort Worth’s gated communities is that the operator’s travel limits need to be re-learned after we install a new rack, and sometimes a resident’s keypad or remote needs to be re-synced if the operator was reset. We test resident access on site before we leave. Call (817) 562-7979 to schedule a rack inspection at your community.
If the gate sags only on the latch side and the gap at the top hinge is wider than at the bottom, the post is tilting and the fix is a post reset, not just a hinge swap. On Fort Worth’s clay soil, a post can lean 3 to 5 degrees within a few seasons, and you can often see a crack in the concrete footer around the post base. If the gate sags evenly and the hinge barrels are visibly worn or the hinge plate is cracked, a hinge replacement is the right call. We check plumb with a level on every call, and we will tell you which repair actually solves the problem. Call (817) 562-7979 for a gate inspection and a straight answer.
When a Fort Worth gate will not hang straight, latch, or open cleanly, the fix usually starts with a post check and a good weld. Call Ironworks Gate Co. at (817) 562-7979 for a free estimate on hinge replacement, post replacement, rail repair, or custom welding. Every quote is written, every job is guaranteed by the 90-Day Done Right Promise, and a live person answers the phone 24 hours a day, 7 days a week.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Fort Worth since 1984.