Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Lakeside
Gate post heaving, sagging hinges, and rusted rails are the three most common calls we get from Lakeside homeowners, and the culprit is usually the same: Eagle Mountain Lake’s black clay soil. Ironworks Gate Co. has been handling Gate Installation - Lakeside and driveway gate repairs across the area for over 42 years, so we know exactly how deep a post needs to sit in this ground and how much movement to expect after a wet spring. If your gate is dragging, leaning, or refusing to latch, call (817) 562-7979 and a live person will answer, 24 hours a day, 7 days a week.
Why Ironworks Gate Co. Is Lakeside’s Preferred Gate Parts & Welding Company
Lakeside isn’t a subdivision town. The properties out here, from the ranch-style spreads off Ten Mile Bridge Road to the older lakefront estates along Live Oak Drive, are built around long private drives that demand gates that close true and stay put. That’s exactly the work we do. Our Lakeside customers tend to have lived in their homes for twenty, thirty, sometimes forty years. They remember the last contractor who cut a corner and left a gate sagging six months later. We don’t work that way.
Every job, whether it’s a hinge replacement on a 14-foot boat-trailer gate or a full post replacement on a 1970s ornamental iron double-swing, is covered by our written 90-Day Done Right Promise. If it isn’t right, we come back and make it right. No paperwork, no arguing. Victor Salinas, who leads our crew, holds every technician to the same standard: the 400th job gets the same care as the first. Our team is background-checked, uniformed, and trained on Gate Access Control in Lakeside and nine major gate-automation brands, so when we weld a new hinge or reset a post, we’re also making sure your Ghost Controls or DoorKing operator is working with the gate, not against it.
Response time to Lakeside matters. When a gate won’t close, your property is open. We dispatch crews to Lakeside from our Dallas-Fort Worth operations office, and most repair calls are handled in a single visit because our trucks carry the parts this area actually needs: heavy-duty hinges, post extensions, rollers, and welding equipment sized for 14 to 16-foot openings.
Our Gate Parts & Welding Services in Lakeside
Hinge Replacement
Lakeside gates fail at the hinge before anywhere else. Between the humidity coming off Eagle Mountain Lake and the seasonal ground movement, the hinge post works out of plumb and the barrel or leaf hinges take the strain. We replace worn or seized hinges with greasable, heavy-gauge hardware sized for the wider gates common on Lakeside lots where boats and trailers need clearance. A hinge replacement in Lakeside typically runs $180-$390 depending on gate weight and how many hinges need work.
Post Replacement
This is the foundational repair in Lakeside, and we mean that literally. Tarrant County’s expansive clay absorbs spring rain and then dries hard under 100-degree summer heat, cycling every year. Any post set less than 42 inches deep will work loose within two or three seasons. We dig past the frost and clay movement zone, set new posts at 48 inches with proper concrete footing, and weld the post extensions to match the original gate geometry. A post replacement in Lakeside runs $450-$1,200 per post, depending on access, concrete removal, and gate size.
Rail Repair
When a gate sags, the horizontal rails bend or crack, usually near the weld at the hinge side. On ornamental iron, the rails take the load every time the gate cycles. We straighten and reinforce rails, weld cracks, and replace sections that have rusted through. The moisture off the lake accelerates corrosion on uncoated steel faster than homeowners expect, so we always grind, prime, and paint any weld we make. Rail repair in Lakeside typically costs $220-$520 depending on the length and whether the rail must be removed for welding.
Custom Welding
Lakeside has a lot of one-off gates. The lakefront estates built in the 1970s and 80s often have ornamental designs that were never mass-produced, which means off-the-shelf replacement parts simply don’t exist. Our Gate Parts & Welding team fabricates replacement finials, scrolls, pickets, and even entire sections in matching style. We’ll weld a patch onto a rusted lower rail or build a new section that matches the original pattern. Custom welding starts at $150 per hour plus materials, and we quote the full job before any work begins.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Lakeside
Most Lakeside gates with automation are running Ghost Controls, DoorKing, Elite, or Mighty Mule Lakeside Gate Motor & Opener systems. We’re trained and equipped on all nine major brands, so when we replace a hinge or reset a post, we also verify that the opener’s travel limits, force settings, and safety edges are still correct for the repaired gate. That matters because a heavy 16-foot ornamental gate will destroy a new hinge if the opener is pushing it past the stop point. We carry brand-compatible parts on the truck for most common Lakeside setups, which keeps most repairs to a single visit.
Common Gate Parts & Welding Problems We See in Lakeside Homes
- Hinge-post sag from clay heave: Posts set shallow (under 42 inches) tilt seasonally as the Eagle Mountain Lake clay swells and shrinks. The gate starts scraping the driveway or the latch no longer lines up, and no amount of hinge tightening fixes a moving post.
- Rust on ornamental iron near the lake: The humidity coming off the water sits on steel hardware and accelerates corrosion, especially where paint has chipped at welds and bolt heads. Hinges freeze, rails rust through from the inside, and rack-and-pinion slides bind.
- Overstressed hinges on wide gates: Lakeside lots are built around boats and trailers. A 14 to 16-foot single or dual-swing gate puts far more leverage on the hinge post than a standard 10-foot suburban gate, and undersized hinges fail early.
- Cracked welds at the hinge stile: Weight plus movement concentrates stress at the weld where the top rail meets the hinge stile. Hairline cracks grow into full breaks, and the gate drops. We see this on nearly every older ornamental gate in the area.
Pricing for Gate Parts & Welding in Lakeside, TX
Here’s what our Lakeside customers typically pay, quoted before any work starts:
- Hinge replacement: $180-$390 per gate
- Post replacement: $450-$1,200 per post, including new concrete footing
- Rail repair (straighten, weld, reinforce): $220-$520 per rail
- Custom welding: $150/hour plus materials; simple repairs often total $200-$450
- Roller replacement: $90-$210 per roller assembly
- Latch and lock replacement: $110-$310
The price is agreed before a single bolt is turned. If we discover additional damage during the repair, we stop, show you the problem, and get your approval on the new number before continuing. We also offer a Free Second Opinion on any written estimate you’ve received from another contractor, $50 off any repair over $250, and a permanent 5% Senior and Veteran discount. Call (817) 562-7979 for an exact quote on your gate.
We Also Serve Cities Near Lakeside
In addition to our work throughout Gate Parts & Welding in Lakeside, we regularly serve homeowners in nearby Fort Worth, Aledo, Azle, and Benbrook. If you’re on the western edge of Tarrant County or just across the Parker County line, the same crew, the same written promise, and the same 24/7 live phone support apply.
Serving Lakeside, TX - Our Local Coverage Area
We’re based in the Lakeside area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Lakeside
Gate posts in Lakeside should be set at least 42 inches deep, and we recommend 48 inches for any gate wider than 12 feet or heavier than 400 pounds. The black expansive clay here cycles through wet and dry seasons every year, and anything shallower than 42 inches will move within two or three seasons. We’ve pulled posts on Live Oak Drive that were set at 30 inches in the 1970s and had already leaned enough to bind the gate. Call (817) 562-7979 if you suspect your posts are shallow, and we’ll inspect them for free.
The most common reason is that the hinge post itself is moving in the clay, not that the hinges are failing. If a previous repair only replaced hinges or welded the rail without addressing the post, the gate will sag again within a year. The clay under your post is the problem, and the fix is setting the post deeper with a proper concrete collar. We check post movement on every Lakeside call because it’s the root cause more often than not.
MIG welding with a solid steel wire is our standard for ornamental iron gate repair in Lakeside, followed by grinding, priming, and a rust-inhibiting paint match. The humidity off the lake means bare welds will rust within months if not properly coated. For cast-iron pieces, which crack rather than bend, we use a nickel rod and preheat the metal to avoid thermal shock. We match the finish so the repair doesn’t stand out against the original gate.
Yes. A 14 or 16-foot gate, especially a single-swing, puts substantially more leverage on the hinge post and the hinges themselves. These gates need heavy-duty barrel or ball-bearing hinges rated for the full gate weight, a reinforced hinge stile, and often a heavier-duty operator with travel stops adjusted correctly. Standard residential hinges will fail early on a wide Lakeside boat-trailer gate. We stock the heavier hardware locally and replace weak parts when we find them.
Yes, and this is a regular part of our work in Lakeside. Many of the older lakefront estates have custom ornamental gates that were never mass-produced, so replacement parts don’t exist in a catalog. We fabricate matching scrolls, finials, pickets, and rail sections in our shop, then weld them in and finish to match the existing patina as closely as possible. Victor Salinas has been doing this kind of bespoke matching for decades, and the repaired section should be indistinguishable from the original.
Call Ironworks Gate Co. for Gate Parts & Welding in Lakeside
If your gate is sagging, rusting, binding, or just not closing the way it used to, call (817) 562-7979. A live person answers, day or night. We’ll set up a time that works for you, come out to your Lakeside property, inspect the gate and its posts, and give you a written price before any work begins. Every job is backed by our 90-Day Done Right Promise, in writing. No fine print, no arguing, no exceptions. We’ll be there when we say we will, and the gate will close like it’s supposed to.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Lakeside and the surrounding area with gate parts and welding for over 42 years.