Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across White Settlement
Gate posts in White Settlement don’t just wear out. They get pushed around by the ground itself. The black clay under this part of North Texas swells hard after winter and spring rains, then shrinks during summer, and that cycle torques hinge posts until gates sag, latches miss, and welds crack. If your gate drags, won’t close, or the hinges scream every time the wind moves it, call us at (817) 562-7979. We’re Ironworks Gate Co., and our Gate Parts & Welding crews work White Settlement neighborhoods every week, from ranch-home driveways off Las Vegas Trail to the commercial slide gates along White Settlement Road.
Most gate hardware problems have a mechanical fix. A hinge replacement here, a reinforced post there, a fresh set of rollers. We carry the parts, we do the welding on site, and we guarantee the work in writing.
Why Ironworks Gate Co. Is White Settlement’s Preferred Gate Parts & Welding Company
We’ve been in this trade for 42 years, and a good share of our work in White Settlement has involved undoing repairs that were never done correctly in the first place. That’s not a criticism of homeowners. It’s a fact about old gates, shifting soil, and temporary fixes. A welded patch on a fatigued frame fails. A hinge post set without a proper footing fails again. We approach every White Settlement job knowing what the ground is going to do to it over the next twenty years.
Our technicians are background-checked and uniformed. They work by an internal code we call K.E.Y.S.: Krafted right, Every time, Your home first, Standing behind it. On every gate job here, we settle the price before we turn a single bolt. No surprises on the bill. No arguing after the fact. If something isn’t right within 90 days, we come back and make it right. That promise is written on every invoice.
The person who answers when you call is a live human being, 24 hours a day, seven days a week. No voicemail tree. No callback queue. You tell us what the gate is doing, and we’ll schedule a truck for Gate Installation - White Settlement or repair, often same day for a hinge or latch that’s failed completely.
Our Gate Parts & Welding Services in White Settlement
Hinge Replacement
Original 1950s and 1960s gates around White Settlement were usually hung on light strap hinges that have spent six decades fighting the clay. The steel thins, the pin holes wallow out, and the gate settles until it catches the driveway. We cut off the old hardware, weld on heavy-duty ball-bearing hinges, and re-hang the gate so it swings clean. Most hinge replacements run $120-$285 per hinge depending on gate weight and access.
Post Replacement
This is the single most common welding call we make in White Settlement, and it’s almost always the same story. The original post was set in a shallow hole with weak concrete or none at all. Forty or fifty years of clay movement later, the post leans, the gate binds, and the opener fights a losing battle. We dig down to undisturbed clay, set a new steel post in a deep reinforced footing, and weld the hinge mounts back in alignment. A full post replacement with welding typically runs $450-$900 in this market, depending on post size and whether the gate frame needs straightening at the same time.
Rail Repair
Ranch-style ornamental iron gates along White Settlement’s older streets tend to crack at the rail joints, especially the bottom rail where moisture collects and freeze-thaw cycles do their work. We grind out the crack, weld the joint solid, and add a gusset when the frame is too light for its span. Straight crack repairs are usually $150-$350; a badly fatigued rail that needs section replacement runs higher.
Custom Welding
Sometimes the right fix is a piece nobody stocks. A gate that’s been widened, a driveway approach with an odd angle, a hinge geometry that never worked from the start. We fabricate on site: custom brackets, stiffener plates, new extension leaves, latch tab repairs. Custom welding work in White Settlement generally runs $90-$150 per hour plus material, and we’ll give you a firm written quote before we strike an arc.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in White Settlement
When a welded repair touches an automated gate, the White Settlement Gate Motor & Opener has to work with the gate’s new alignment, not against it. Our techs are factory-trained on nine opener brands, including DoorKing, Viking, and Ghost Controls, so the welding and the automation get addressed in the same visit. We keep a parts stock that covers the hardware those systems depend on here: commercial-grade rollers, V-groove track, heavy hinges, latch kits, and weldable steel sections. If we’re repairing a slide gate on White Settlement Road, we’re not calling around for parts. They’re on the truck.
Common Gate Parts & Welding Problems We See in White Settlement Homes
- Soil-heaved hinge posts. White Settlement sits on expansive black clay that swells and shrinks with every rain and drought cycle. The ground pushes posts out of plumb until the gate sags, the latch misses, and the hinges bind. This is our number one welding repair call here.
- Fatigued 1960s gate frames. The original iron and galvanized gates on post-war ranch homes were built light. Sixty years of wind, heat, and occasional ice have stressed the welds and rails past their design life. Repairs need weld reinforcement, not just paint.
- High-cycle slide gate wear. The defense-contractor and light-industrial facilities along White Settlement Road run heavy slide gates thousands of cycles a week. Rollers, track, and gearboxes wear out here at a rate residential gates never see. We stock the commercial parts those jobs require.
- Ice storm damage. Winter ice loads bend ornamental aluminum gates and seize low-torque openers that were never designed for sub-freezing strain. After a White Settlement freeze, our welding crews see a wave of bent rails and snapped hinges.
Pricing for Gate Parts & Welding in White Settlement, TX
A hinge replacement in White Settlement typically runs $120-$285 per hinge. A single post replacement with welding and a new concrete footing lands between $450 and $900. Rail crack repairs are $150-$350 for a straight weld, and custom fabrication bills at $90-$150 per hour plus material. Slide gate roller and V-groove track replacement on a commercial gate off White Settlement Road runs $300-$800 depending on gate length and cycle wear.
The price you’re quoted is the price you pay. We write it down before we start work, and that written quote holds. If we find something else when the gate is opened up, we stop and tell you before anything changes.
Standing offers in White Settlement: $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a permanent 5% senior and veteran discount. Call (817) 562-7979 and we’ll get you a firm quote.
We Also Serve Cities Near White Settlement
Ironworks Gate Co. dispatches welding and parts crews from our Dallas-Fort Worth office to homes and businesses across the western metro. Beyond White Settlement, we regularly cover Fort Worth, Aledo, Azle, and Benbrook. If you’re on the edge of two service areas, call us and we’ll confirm which truck is closest to you.
Serving White Settlement, TX - Our Local Coverage Area
We’re based in the White Settlement area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in White Settlement
White Settlement sits on a band of highly expansive black clay that holds water and swells harder than the sandy loam common in Fort Worth and Saginaw. That clay pushes against every post below grade, heaving and tilting them with each wet-dry cycle. Fort Worth’s soil mix drains differently and shifts less. The fix is a deeper post with a properly reinforced concrete footing, not a shorter post.
Yes, in most cases we set a new post and cut the old hinge mounts off the gate frame, then weld fresh hinges onto metal that’s still sound. If the gate frame itself is too thin or cracked, we’ll reinforce or section-repair it during the same visit. We’ll tell you before we start what the frame can carry. For an exact assessment and a written quote, call us.
Yes. We keep commercial slide gate rollers, V-groove track, and heavy-duty hinge sets on our trucks when working this part of White Settlement. Those gates run thousands of cycles a week and chew through standard residential parts quickly. Installing the correct commercial hardware is the difference between a repair that lasts years and one that fails next month. Call (817) 562-7979 and we’ll check stock for your gate’s measurements.
For Gate Access Control in White Settlement on a single swing gate with unobstructed sun, a properly sized solar operator from a brand like Ghost Controls works well. The key in White Settlement is battery capacity, because cloudy winter stretches and ice storms happen, and the panel needs clean southern exposure. For heavy or double gates, solar can be marginal. We’ll size the system to the gate’s actual weight and daily cycles before we recommend anything. A free site assessment is part of the estimate.
In most cases, yes. We heat and straighten bent rails, then weld reinforcement plates or gussets where the frame flexed. If the operator seized during the same storm, we’ll check it over too, because a bent gate and a stressed opener usually fail together. The repair cost depends on how far the frame deflected, and you’ll have a firm number before any work starts.
If your gate in White Settlement is sagging, dragging, or just won’t latch, call (817) 562-7979 for a free estimate. We’ll show up, tell you what the gate needs, and write the price down before anything gets touched. That’s how we’ve worked for 42 years.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving White Settlement and the greater Dallas-Fort Worth area.