Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterHow Much Does Gate Repair Cost in Fort Worth?
Most gate repair projects in Fort Worth range between $250 and $850, depending on whether the issue stems from a structural weld failure, a hinge misalignment, or a faulty gate opener. Simple adjustments or sensor realignments often fall on the lower end of that spectrum, while motor replacements or heavy-duty welding work on older iron estate gates require more labor and parts. We provide upfront pricing before any work begins, so you know exactly what the bill will be before a single bolt is turned.
Gate Repair Cost Breakdown (2026)
Every gate system in Fort Worth faces unique challenges. Our dry, often unpredictable North Texas climate can wreak havoc on gate operators, while the expansive clay soil common in neighborhoods like Tanglewood or Westover Hills can cause posts to shift, throwing hinges out of alignment. Because we have been serving this area since 1984, we know exactly what to look for when your gate stops working.
The following table outlines standard repair ranges for common gate issues in the Fort Worth market.
| Service Type | Estimated Price Range |
|---|---|
| Gate Hinge Adjustment & Re-alignment | $225 - $450 |
| Gate Opener Sensor/Safety Beam Repair | $275 - $550 |
| Welding & Structural Gate Repair | $350 - $900 |
| Control Board or Circuitry Repair | $400 - $850 |
| Driveway Gate Opener Motor Replacement | $1,200 - $2,800 |
| Gate Keypad or Entry System Replacement | $300 - $650 |
These figures reflect the cost of professional service performed by trained technicians. We find that many homeowners in Fort Worth attempt DIY fixes, only to call us later because they realized that high-tension gate components-like springs, heavy steel swing arms, and electrical control boards-pose genuine safety risks. If your gate is stuck or moving erratically, please keep children and pets away from the equipment and call us at (817) 562-7979 for a professional assessment.
What Affects Gate Repair Pricing in Fort Worth
Pricing isn’t just about the part; it is about the expertise required to install it correctly. When you call Ironworks Gate Co., you are paying for 42 years of experience and the assurance that the job is done right the first time. Several factors influence the final cost of your gate service.
- Gate Material and Weight: A heavy, custom-wrought iron gate requires different tools and labor than a lightweight aluminum or chain-link gate. Wrought iron often requires specialized welding, which is a skilled trade that takes more time than swapping out a pre-manufactured part.
- Automation Brand and Compatibility: We are trained and equipped on nine specific brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your system is an older or proprietary model, sourcing parts can take longer, which affects the labor duration.
- Structural Integrity of Posts: If your gate is dragging, the problem is often the post, not the gate itself. If the concrete footing has cracked or the post has leaned due to soil movement, we must stabilize the foundation before the gate will hang correctly again.
- Electrical Infrastructure: Older homes in neighborhoods like Fairmount or Rivercrest may have outdated wiring that struggles to provide the consistent voltage modern gate openers require. Upgrading the electrical supply to the gate ensures the motor doesn’t burn out prematurely.
- Safety Compliance Requirements: Modern safety codes require specific photo-eye sensors and entrapment prevention devices on all automatic gates. If your gate system is outdated, we may need to bring it up to current safety standards to ensure it operates reliably and legally.
How to Save on Gate Repair
The best way to save money on gate repairs is to prevent the breakdown from happening in the first place. A gate that doesn’t close properly puts unnecessary strain on the motor, leading to more expensive repairs down the road.
We recommend a seasonal tune-up for your gate system. For $89, we can inspect your hinges, lubricate the moving parts, check the tension on the drive chain, and test the safety sensors. This small investment often reveals minor issues-like a loose bolt or a fraying wire-that we can fix for the cost of a service call, rather than waiting for the motor to fail entirely.
Additionally, we offer a $50 discount on any repair over $250. If you are uncertain about a quote you received from another company, we offer a free second opinion. We also provide a 5% discount for our senior and veteran customers. If you are ready to address an issue, call (817) 562-7979 to schedule an estimate. Victor Salinas and the team at Ironworks Gate Co. are ready to help you get your gate moving again.
FAQs - Gate Repair Cost
How much does it cost to fix a gate that won’t open in Fort Worth?
Most gate opener repairs, such as fixing a stuck motor or replacing a faulty control board, typically range from $400 to $850. We perform a diagnostic test to see if the issue is a simple electrical connection or a mechanical failure before we perform any work. Call (817) 562-7979 for an exact quote.
Is it cheaper to repair a gate or replace it entirely?
In most cases, we can repair your existing gate for significantly less than the cost of a full replacement. Repairs for structural issues, such as welding a broken hinge or realigning a post, usually cost between $350 and $900, whereas a full gate replacement is a much larger investment. If we believe a repair will not last, we will tell you honestly, but we prioritize saving your existing equipment whenever possible.
Can you come out to fix my gate today?
We understand that a broken gate is a security issue, not just an inconvenience. We offer prompt, professional service and often have availability to come out the same day or the next day to assess your gate. Please call (817) 562-7979 so we can get your address and schedule a technician.
What is the 90-Day Done Right Promise?
Our 90-Day Done Right Promise is our written guarantee that we stand behind our work. If we repair your gate and something isn’t right, we come back and make it right-no paperwork, no arguing, and no hassle. It is our standard for every job, from a simple hinge adjustment to a full motor install.
Do you service my specific gate brand?
We are trained and equipped to service nine major gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Because we specialize in these systems, we carry the parts and diagnostic tools to fix them in a single visit in most cases.
If you are dealing with a gate that is dragging, failing to latch, or refusing to open, it is time to call a professional. We have been serving Fort Worth since 1984, and we treat every home with the same care we would use for our own. You can find more information about our specific services on our Gate Repair in Fort Worth page or return to our home page to see our full list of services.
Pricing reflects the Fort Worth market as of 2026. Ironworks Gate Co. offers free estimates - call (817) 562-7979.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Fort Worth since 1984.
What Our Customers Say
"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one on the truck, and we were moving cars again inside an hour."
- Chris Gallagher"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and put a surge protector on the line so hopefully it does not happen again."
- Layla Haddad"Used them at two properties now. Both times they diagnosed it on the first visit instead of guessing and coming back."
- Rohan Shah