Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Gate Access Control for Fort Worth Homeowners
A gate access control system is what lets the right people in and keeps everyone else out, through a keypad, remote, phone, card reader, or intercom. In Fort Worth, where half-acre lots and long driveways are common from Ridglea Hills to Tanglewood, a failed access system doesn’t just rattle your routine. It leaves your driveway open to whoever figures out the gate won’t close. Ironworks Gate Co. has installed and repaired Fort Worth Gate Access Control on thousands of gates since 1984, and we answer the phone live 24 hours a day, every day at (817) 562-7979.
We’re not a handyman with a multimeter on the side. Gates and their access systems are all we do, and Victor Salinas has built Ironworks Gate Co. around a simple rule: the job gets done right, and it gets backed in writing. Every access control repair, upgrade, or fresh installation carries our written 90-Day Done Right Promise. If something isn’t right, we come back and make it right. No paperwork, no arguing.
What Our Gate Access Control Service Includes
Access control covers every way a person can open your gate without getting out of the car, plus the systems that let you see and speak with whoever is at the driveway before you let them in. Here’s what we handle in Fort Worth, explained plainly.
Keypad Entry
A keypad mounted at the driveway lets family, delivery drivers, and trusted visitors punch in a code to open the gate. It’s the most common access method for Fort Worth homes with regular foot and vehicle traffic. We install weatherproof keypads, replace worn keys, and rewire units that have gone dead from years of Texas sun and rain. If your keypad only works when you hold it at an angle, we can usually fix it in a single visit.
Remote Control
The handheld remote in your visor or console is a small transmitter matched to the receiver inside the gate operator. When a remote stops working, the problem is usually a dead battery, a receiver that has drifted off frequency, or a control board that has dropped the programmed code. We program, replace, and troubleshoot remotes on every major gate operator brand, and we stock common replacements on the truck so you aren’t waiting on a parts delivery.
Phone Entry
Phone entry systems connect the gate to your telephone line or cellular network. A visitor presses the call button at the gate, your phone rings, and you can buzz them in with the push of a button. It’s common on Fort Worth estate properties with long driveways where running intercom wire isn’t practical. We install cellular-ready phone entry units so the system works even if your landline was cut years ago.
Card Reader
Card readers let authorized users tap or swipe a credential to open the gate. They’re popular with Fort Worth homeowners who have regular staff, caretakers, or multiple vehicles coming and going. We install standalone readers and fully networked systems with logs that track who opened the gate and when. The readers we install are built for outdoor Texas heat, not office-building hardware rated for an air-conditioned lobby.
Video Intercom
A video intercom adds a camera and speaker at the driveway so you can see and hear who’s at the gate before you open it, from a handset inside the house or an app on your phone. Fort Worth homeowners in areas like Mira Vista and Rivercrest often pair these with an existing keypad or remote system. We wire, mount, and configure the camera and audio so the picture is clear in daylight and at night.
Smart Access
Smart access ties your gate to a phone app, letting you open and monitor the gate from anywhere with a cellular signal. You can see when the gate was opened, grant a visitor temporary access, or close the gate from the airport. We set up smart modules on compatible operators and make sure the app actually works before we leave, not just that the wiring looks finished.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Gate Access Control
We service and install access control on DoorKing, LiftMaster, Elite, and Ghost Controls operators across Fort Worth, along with FAAC, BFT, Linear, Viking, and Mighty Mule. The brand matters because the receiver frequency, the keypad protocol, and the control board layout are different on every one of them. Our technicians are certified on all nine, which is why we carry the right parts and the right programming tools on the first visit instead of guessing.
With DoorKing, we commonly replace phone entry cards and keypads on older units that have outlasted two or three Texas summers. Ghost Controls gear is popular on newer ornamental steel gates, and we stock their compatible remotes and keypads. Elite and LiftMaster operators respond well to smart module retrofits, which is a practical way to add app access to a gate you already own. Whatever make sits on your driveway, we’ll diagnose it correctly and fix it the first time.
Signs You Need Gate Access Control Right Now
- The keypad works, but only sometimes. A keypad that opens the gate one time and ignores you the next usually points to failing contacts, moisture inside the housing, or a receiver that’s losing signal. It won’t fix itself, and it always quits for good on the day you have guests arriving.
- Your remote only opens the gate from ten feet away. Weak range means the receiver antenna or circuit is failing. You might think it’s the battery, and sometimes it is, but a remote that used to work from the street and now needs to kiss the gate is giving you a warning.
- A visitor pressed the button and nothing rang. If the call button at the driveway doesn’t ring your phone, the issue is in the phone entry wiring, the cellular unit, or the power supply at the gate. Without that fix, delivery drivers leave packages by the road and family members sit at the driveway honking.
- The gate opens but won’t close on its own. Some operators are set to auto-close, and when that function dies, the gate stays open for anyone. That’s a security hole in a city where a long driveway is the first line of property defense, and it’s usually a quick control board adjustment or sensor realignment.
- You’re handing out keys or codes you can’t remember who has. If you’ve lost track of who holds a remote or knows the code, it’s time for a system that logs entry or easily revokes credentials. A keypad with delete-programming or a smart module with app control solves this without changing every piece of hardware.
Our Gate Access Control Process - Step by Step
Step 1: You call, a person answers
Call (817) 562-7979 and a live person picks up, day or night. We’ll ask what the gate is doing, what brand of operator you have, and when the problem started. Most Fort Worth calls get scheduled for a same-day or next-day visit.
Step 2: On-site diagnosis
A background-checked, uniformed technician arrives, walks the gate with you, and tests the keypad, receiver, wiring, power supply, and control board. We test voltage at the board rather than guessing, because a keypad that looks dead is often a transformer that has quietly stopped feeding it power.
Step 3: Upfront price, no surprises
Before any work starts, you get a written price. The number is agreed before a single bolt is turned. If the fix is small, we’ll tell you. If it warrants a full replacement, we’ll show you exactly why and what the two or three options cost.
Step 4: The repair or install
Most access control jobs finish in a single visit. We carry common keypads, remotes, receivers, and control board parts on the truck, which means you aren’t waiting a week for a part to ship into town.
Step 5: The walk-through and the Promise
We test the system with you there, program your codes and remotes, and show you how it works. Then the 90-Day Done Right Promise goes in writing. If anything is off in the next three months, we return and fix it, no charge, no argument.
How Much Does Gate Access Control Cost in Fort Worth?
Best Gate Access Control in Fort Worth, TX costs depend on what’s failed and what you’re adding. A replacement keypad typically runs $180 to $450 including install. Adding a new remote and programming it usually lands between $75 and $150. A full phone entry system, including the cellular unit and install, commonly runs $900 to $2,200, while video intercom systems in Fort Worth generally fall between $1,400 and $3,800 depending on camera quality and wiring. Smart access modules that retrofit to an existing operator typically run $350 to $800.
What moves the price: the brand and age of your current operator, the distance from the gate to the house or nearest power source, whether we’re repairing existing wiring or running new conduit, and whether you want app-based features or a simple standalone keypad. Overpaying usually happens when someone replaces a whole operator board when a $50 receiver was the problem. Our free estimate names the actual fault and the actual fix. We’ll also give you a Second Opinion on any written estimate from another company, free of charge. And remember: the price is quoted and agreed before any work begins, so the final bill never surprises you.
Gate Access Control Near Fort Worth - Our Service Area
Ironworks Gate Co. works across Fort Worth and the surrounding communities. If your driveway is off the Chisholm Trail Parkway in Fort Worth, out toward Aledo and the west county, or up in Azle and Eagle Mountain, we’re close. We also serve home gates throughout Benbrook, Haltom City, Saginaw, White Settlement, Lakeside, Briar, Willow Park, Richland Hills, and Watauga. Our Fort Worth customers usually see a same-day or next-day appointment, with emergency calls answered live around the clock.
Serving Fort Worth, TX - Our Local Coverage Area
We’re based in the Fort Worth area and know this community well, including Gate Access Control - Haltom City. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Gate Access Control in Fort Worth
Gate access control is the system that lets authorized people open your driveway gate, through a keypad, remote, phone line, card reader, video intercom, or phone app. It includes the devices at the gate, the wiring, the receiver inside the operator, and the programming that ties it all together. In Fort Worth, we design, install, repair, and upgrade these systems for homeowners whose gates need to open for the right people and stay closed to everyone else. Call (817) 562-7979 for a free estimate on any access control work.
Most access control installations finish in one visit, usually between one and four hours depending on wiring distance and the number of devices. A simple keypad replacement can be done in under an hour, while a full video intercom with new conduit may take half a day. We’ll give you a clear time window when you book, and we’ll be there when we say.
A typical access control repair in Fort Worth runs $150 to $450 for common issues like a failed keypad, dead receiver, or reprogramming. Larger repairs such as replacing a phone entry board or running new wire can run $600 to $1,500. The exact price is quoted and agreed before any work starts. Call (817) 562-7979 for an exact quote, estimates are free.
Yes, we service LiftMaster and DoorKing systems, along with Elite, Ghost Controls, FAAC, BFT, Linear, Viking, and Mighty Mule. Our technicians are trained and certified on all nine brands, and we stock OEM parts for the most common repairs. Whatever brand is on your driveway, we’ll diagnose it correctly and fix it the first time.
Yes. A live person answers our phone 24 hours a day, 7 days a week, so you’ll never hear a voicemail tree when your gate is stuck open at midnight. We keep most common access control parts on the truck, which means many Emergency Gate Access Control in Fort Worth, TX calls are finished the same day you call. Dial (817) 562-7979 any time.
Every access control job we complete is covered by our written 90-Day Done Right Promise. If anything isn’t right within ninety days, we come back and make it right, with no paperwork and no argument. It’s the same Keystone Standard we’ve applied to every gate job in Fort Worth since 1984.
Clear the area around the gate and the operator so the technician has open access, and unplug any vehicles that may be parked near the control box. If you have remotes or keypad codes, have them ready so we can test and reprogram on site. That’s all we need. We’ll handle the rest, and you’ll know the price before any work begins. Call (817) 562-7979 to schedule your visit, and ask about our $50 Off Any Repair Over $250 or our $89 Seasonal Tune-Up.
Schedule Your Gate Access Control Service in Fort Worth Today
When your gate access fails, your driveway is no longer yours to control. Call (817) 562-7979 and a live person answers, day or night. We’ll schedule a Fort Worth visit that works for you, give you a written price before any work starts, and back the finished job with our 90-Day Done Right Promise. Senior and veteran customers save 5% off every service, always. Get the gate working right and keep it that way.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Fort Worth since 1984.