Mighty Mule Keypad & Intercom Repair Nationwide

Mighty Mule Keypad & Intercom Repair: The Fort Worth Owner’s Guide

If your Mighty Mule keypad has gone dead or your intercom crackles when a visitor buzzes, we can usually get it sorted in one visit. We stock Mighty Mule-compatible keypads and intercom parts on our trucks, and a typical keypad or intercom replacement in Fort Worth runs between $145 and $320 installed, parts and labor included. Most homeowners discover the failure the same way: the gate works fine from the remote but won’t respond to the keypad, or the intercom button rings but the voice comes through garbled and useless.

Call (817) 562-7979

What often looks like a dead keypad is actually a corroded wire run or a failing control board input. The part itself may be fine. That’s the first thing we check, because replacing a keypad when the problem is a bad splice under the driveway only buys you a few weeks. Victor Salinas has spent nearly four decades under Fort Worth gates, and the pattern never changes: the part that looks broken isn’t always the part that’s broken.

Key takeaways:

• We service Mighty Mule keypads and intercoms across Fort Worth, usually same day.
• Installed price is quoted and agreed before any work starts. No surprises on the bill.
• A live person answers at (817) 562-7979, 24 hours a day, 7 days a week.
• Every job is backed by our written 90-Day Done Right Promise.

Which Mighty Mule Models This Applies To

Mighty Mule keypads and intercoms come in two main families: the older FM series (FM135, FM136, FM145, FM146, FM150, FM200) and the newer MM series (MM360, MM371W, MM562, MM571W, MM572W). The keypad for an FM145 will not talk to an MM572 control board without a compatibility adapter, and even then it’s fiddly. Before you order anything online, open the control box and read the model number off the board itself. That number, not the one on the gate or the remote, is what determines which keypad and intercom will pair.

For Mighty Mule specifically, we recommend OEM parts over aftermarket. The aftermarket keypads for Mighty Mule are cheaper up front but the pinpads wear faster and the RF handshakes drop more often in Texas heat. An OEM Mighty Mule keypad typically outlasts an aftermarket unit by three to four years in Fort Worth’s sun. We’re an independent service provider, not affiliated with Mighty Mule, so when we quote a part we tell you exactly what you’re getting: OEM, quality aftermarket, or a rebuilt unit, and what each one costs and lasts.

Signs Your Mighty Mule Keypad & Intercom Repair Is Failing

• Keypad won’t respond at all, but the remote works. This usually points to a failed keypad board or a broken wire between the keypad and the control box. The control board itself is often fine.
• Keypad works, but only some buttons respond. The membrane or dome switches under the keys have worn through. Texas dust and UV take a toll on those membranes faster than on most climates.
• Intercom rings but you hear only static or a faint whisper. The speaker or microphone element has failed. On Mighty Mule units, the mic seals dry out in Fort Worth’s low humidity and stop picking up voice.
• Keypad works, then stops after rain. Water is getting into the housing or a splice somewhere underground. You’d be surprised how often this is a cracked wire nut, not the keypad.
• You reprogram the keypad and it loses the code within a day. The memory chip on the keypad board is failing. A working keypad holds its code for years, not hours.

Replacement Cost & What’s Included

In Fort Worth, a Mighty Mule keypad replacement runs between $145 and $260 installed, depending on whether we’re swapping a basic wired keypad or a wireless unit with an intercom module. A full intercom replacement can run $180 to $320 when the speaker, mic, and call button all need changing. The range comes down to two things: the specific model and whether new wire needs pulling. Wiring is often the quiet cost. In older Fort Worth neighborhoods like Ridglea Hills and Arlington Heights, the original low-voltage runs are often undersized or spliced in three places.

Every quote includes the part, the labor, and the testing. We test the full cycle: keypad code entry, gate open, auto-close delay, and intercom voice both directions. The price we quote is the price you pay, settled before a single bolt is turned. And every Mighty Mule repair we do in Fort Worth is covered by our written 90-Day Done Right Promise. If it’s not right, we come back and make it right. No arguing, no paperwork.

DIY or Call Us?

You can safely check a few things yourself: confirm the keypad is getting power, look for obvious cracks or water inside the housing, and make sure the wires at the keypad aren’t hanging loose. Beyond that, this work goes sideways fast. Mighty Mule keypads run on low voltage, so the shock risk is minimal, but a wrong splice or a miswired relay can fry the control board. And a control board replacement costs more than the keypad ever did.

The other thing DIY owners run into is compatibility. You order a keypad that pairs with the remote you found online, but not with the board in your gate. Then you’re out the part cost and you still have a dead keypad. We match the part to the board on the first visit. If you’d rather not spend a Saturday on your knees with a multimeter, call us at (817) 562-7979 and we’ll handle it.

FAQs

Call Ironworks Gate Co. for Mighty Mule Keypad & Intercom Repair in Fort Worth

If the gate doesn’t open when it should and close when it should, nothing else about it matters much. That’s the first thing we fix. Ironworks Gate Co. has been serving Fort Worth and the surrounding communities for over 42 years, and we’re still here because we do the work right and we stand behind it in writing. A live person answers at (817) 562-7979, day or night. Call us for a free estimate on your Mighty Mule keypad or intercom repair. We’ll give you a square deal: upfront price, no surprises on the bill.

Written by Victor Salinas, Owner, Ironworks Gate Co. at Ironworks Gate Co., serving Fort Worth and nearby areas.