Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Bedford
Gate installation in Bedford costs between $2,400 and $9,800 for most residential projects, with driveway swing gates starting around $2,400 and automated slide gates often landing between $4,500 and $8,500 depending on length, automation, and site prep. That’s the honest range we quote when Bedford homeowners call (817) 562-7979. A proper installation takes two to four days from first measure to final walkthrough, not same-day. We’ve been doing this work long enough to know Bedford’s clay soil, its slope changes, and its building inspectors better than any national chain ever will.
We’re Ironworks Gate Co., and gate installation is all we do. Our Gate Installation team works Bedford driveways and side yards every week. When you call, a live person answers. We’ll schedule a free measure, walk the site with you, and put the price in writing before a single bolt gets turned.
Why Ironworks Gate Co. Is Bedford’s Preferred Gate Installation Company
Bedford homeowners don’t have much patience for contractors who overpromise. They’ve lived in their homes twenty, thirty years. They’ve seen crews come and go. The reason they call us back, and the reason our reviews from Bedford customers read the way they do, has less to do with flash and more to do with follow-through.
We’re a local specialist, not a handyman with a gate on the side. Every technician who drives into Bedford wears a uniform, has passed a background check, and carries the same training on nine automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We quote the full scope up front, including groundworks and power, so the bill doesn’t grow after the first post hole is dug.
Since 1984, we’ve built our name on one standard: if it’s not right, we come back and make it right, in writing, for 90 days. No paperwork, no arguing. We call it the Keystone Standard. It applies to every gate we hang in Bedford.
Our Gate Installation Services in Bedford
Driveway Gate Installation
Bedford driveways come in every width and slope you can imagine, from flat lots off Central Drive to modest grades in neighborhoods off Harwood Road. A driveway gate has to hold its line through clay that swells in spring and shrinks in August. We build the frame square, set posts at depth with compacted base, and hang the gate so it clears the driveway even after the soil moves.
Pedestrian Gate Installation
A pedestrian gate in Bedford usually fits a side yard or a fenced walkway between the house and the property line. These gates take more abuse than driveway gates because they get cycled dozens of times a day. We install them with proper latching hardware and, when the homeowner wants it, a keypad or intercom tied into the same automation system as the driveway gate.
Sliding Gate Installation
Sliding gates are the right answer for Bedford properties where the driveway slopes toward the house or where a swing gate would collide with a car parked in the turnaround. We measure the run, check the concrete for level, and build the track or cantilever system accordingly. On Bedford lots with older slab work, we often have to grind or shim the track path before the gate rolls true. That’s the kind of local condition a catalog cannot teach you.
Swing Gate Installation
Swing gates make sense when you have a flat apron and room for the leaves to open fully without hitting a fence or a parked vehicle. In Bedford, the main thing we protect against is post migration. Clay-heavy soil expands and contracts with the wet-dry cycle, and a hinge post set too shallow will lean within two seasons. We set footings at 30 inches with compacted base and rebar as standard, not as an upgrade.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Bedford
We install and service operators from nine brands, including Ghost Controls, DoorKing, and Elite. That matters in Bedford because we can match the opener to the gate’s weight, the driveway’s slope, and the power situation at the house, rather than forcing whatever’s on the truck. We keep common parts stocked for Bedford jobs, so a control board or safety edge doesn’t turn a two-day install into a two-week wait.
Common Gate Installation Problems We See in Bedford Homes
- Hinge posts migrating out of plumb. Bedford’s clay-heavy soil swells after rain and shrinks during dry spells. A gate that hung perfectly in April starts binding by July because the post footing shifted. We see this constantly on gates installed by general contractors who didn’t know the soil. Our fix is footings at 30 inches with rebar, keyed into undisturbed earth.
- Slide gates jumping the rack on sloped driveways. Bedford has plenty of homes built on gentle slopes, especially where older slab foundations meet newer additions. If the concrete wasn’t leveled before the track went down, the gate can climb off the rack and strain the motor. We check pitch with a laser before ordering any slide gate hardware.
- Shallow post footings without rebar. This is the big one. We get called to Bedford homes where a new gate worked fine for a few months, then started scraping the driveway. The footing was 18 inches deep, no rebar, and poured loose into the hole. That gate was never installed correctly, regardless of what the previous invoice said.
- Operators undersized for the gate’s weight. A sturdy steel gate on a Bedford driveway needs an operator rated for its actual weight, not a box-store unit sold by “number of vehicles per day.” We size operators by gate weight, duty cycle, and wind exposure, which in Bedford means accounting for the open exposure many front yards get along the main boulevards.
Pricing for Gate Installation in Bedford, TX
A pedestrian gate installation in Bedford runs $900 to $2,600 depending on width, materials, and whether you want a lock or keypad added. A single swing driveway gate typically runs $2,400 to $5,200. A double swing gate or a sliding gate usually lands between $4,500 and $9,800, including the operator, safety photocells, and the electrical run from the house. The wild cards in Bedford are soil conditions and concrete prep: if we’re asked to remove old concrete or repair a driveway edge before setting posts, that adds $400 to $1,200 to the job, and we will tell you that before anything is signed.
Every quote is written, itemized, and locked before work starts. No surprises. Estimates are free, and we’ll walk the site with you so you can see exactly what the numbers cover. Call (817) 562-7979 to schedule a measure.
We Also Serve Cities Near Bedford
Our crews work Bedford every week, and the same team serves Bedford neighbors in Hurst, North Richland Hills, Haltom City, and Keller. If you live just over the city line, call (817) 562-7979 and we’ll get you on the schedule like any Bedford address.
Serving Bedford, TX - Our Local Coverage Area
We’re based in the Bedford area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Bedford
The panel is rarely the problem. In Bedford, the issue is almost always the hinge post. Clay-heavy soil expands and contracts with moisture, and a post set at 18 inches without rebar will lean within a year or two, pulling the gate leaf down with it. The panel stays straight, but the whole assembly rotates. The fix is pulling the post, digging a 30-inch footing, compacting the base, and setting rebar before pouring. We’ve done this repair on gates throughout Bedford, including off Harwood Road and along the neighborhoods near Central Drive. Call us at (817) 562-7979 and we’ll inspect the post before recommending any replacement parts.
Yes. Bedford enforces the same entrapment-protection standards as most Texas municipalities: automatic gates must be equipped with safety photocells or contact edges that stop and reverse the gate when something blocks its path, and the system must pass a reversal test on inspection. Our installs always include UL 325-compliant safety devices and a demonstration of the reversal test at the final walkthrough. If you’re replacing an older gate that predates those rules, we’ll bring the whole system up to current code while we’re there.
Sometimes, but not always. A slide gate needs a reasonably level path, and Bedford driveways with a noticeable pitch often require either a stepped concrete pad, a raised track system, or a switch to a swing gate configuration instead. We’ll measure the slope with a laser during the site visit and tell you honestly which design will hold up. If the slope is workable, we’ll spec the right operator and rack to handle it. If it’s not, we’ll say so and show you the swing gate options. Estimates are free at (817) 562-7979.
A typical Bedford gate installation takes two to four days from the first measure to the final walkthrough. Post footings need 24 to 48 hours to cure before we hang the gate, and the electrical run from the house to the post has to be trenched correctly. Anybody promising same-day installation is cutting a corner, and in Bedford’s clay soil that usually means a footing that will fail within two years. We schedule in phases, we show up when we say, and we don’t rush concrete.
If the gate sits more than about 75 feet from the nearest power source, we usually recommend either a solar-powered operator with a battery backup or a dedicated buried electrical line from the main panel. Bedford’s sunny climate makes solar viable for most of the year, though a buried line is more reliable long-term for gates that run many cycles per day. We’ll look at the run distance, the gate’s weight, and the daily cycle count, then recommend the cheaper-to-run option over ten years, not just the cheaper-to-install one.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Bedford and the Dallas-Fort Worth metroplex.