Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Haslet
Gate Installation in Haslet means getting the post footings right on North Texas clay, setting the gate true, and wiring the operator so it reverses when it meets a child’s bicycle or a trash can. We serve Haslet homeowners from Sendera Ranch to Northstar with driveway gates, swing gates, and security gates, and we quote the price before any work starts. Schedules fill quickly in spring, so call (817) 562-7979 to get a written estimate from Ironworks Gate Co., headed by Victor Salinas, a gate specialist with over 42 years behind the craft.
Why Ironworks Gate Co. Is Haslet’s Preferred Gate Installation Company
When a gate leans or a motor strains, Haslet homeowners call Ironworks Gate Co. because we know the soil here and we know the hardware that survives it. This is not our first rodeo on the clay and former ranchland that defines Haslet. We have pulled more than a few 24-inch footings out of the ground in Sendera Ranch and Northstar after two seasons of movement. Our background-checked, uniformed technicians come to Haslet from our Dallas-Fort Worth office, and a live person answers our phones 24 hours a day, 7 days a week, not a voicemail tree.
Every completed Haslet job carries the 90-Day Done Right Promise in writing. If something is not right, we come back and make it right. No paperwork. No arguing. It is the Keystone Standard, and it has been the backbone of this company since 1984. Our customers in Haslet tend to live in homes they plan to stay in for another twenty years. They want one correct installation, not three cheap ones. We respect that.
Our Gate Installation Services in Haslet
We install and automate the full scope of residential and estate gates in Haslet. Here are the four Haslet homeowners ask about most.
Driveway Gate Installation
Most driveway gates we install in Haslet are steel or ornamental iron, either sliding or swinging, on concrete or gravel drives that sit on highly expansive clay. We set post footings at 36 inches minimum here, with wider diameter and a rebar cage. If you are building in a newer Haslet subdivision with fresh fill, that extra depth is the difference between a gate that stays plumb and one that sags by year two. We handle the full run: posts, hinges, gate leaves, operator, keypad, and safety edges.
Swing Gate Installation
Swing gates remain the most common choice in Haslet’s acreage properties and larger lots off FM 156 and Avondale-Haslet Road. A proper swing gate in Haslet needs ball-bearing hinges, deep footings at both posts, and an operator matched to the leaf weight and wind load. We routinely remove and reset leaning hinge posts, then install operators from LiftMaster, FAAC, or BFT with full UL 325 entrapment protection. No shortcut gets past us.
Sliding Gate Installation
Sliding gates fit Haslet properties where a driveway slopes or a swing arc would hit a parked car. On gravel driveways, the rack alignment and loop detector placement make the difference between a gate that runs smooth for years and one that strips its rack in a season. We set the concrete track or V-track base correctly the first time, and we test it under full travel before we call the job done.
Pedestrian Gate Installation
We also build and hang pedestrian gates in Haslet, usually matched to an existing driveway gate so the hardware and finish line up. These gates get the same deep post treatment and the same 90-Day Done Right Promise as any driveway gate. Whether it is a simple yard gate off Blue Mound Road or a steel security gate beside a driveway, the post and hinge geometry matter just as much.
We also install double gates and security gates. For security gates, our installers in Haslet focus on deadbolt-ready posts and operators with lock-out features, so the gate is not just a barrier but an actual Haslet Gate Access Control point you control.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Haslet
Ironworks Gate Co. is factory-trained on nine gate automation brands, including Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters in Haslet because we do not have to call a manufacturer’s help line and guess. We stock common control boards, remotes, and safety edges for these brands, so Gate Repair - Haslet does not sit waiting on a part from out of state. Whatever brand is already on your Haslet driveway, we can service it and, when the time comes, replace it with the right match.
Common Gate Installation Problems We See in Haslet Homes
- Clay soil heave and lean: Haslet sits on expansive clay that swells when wet and shrinks in the dry Texas summer. Post footings poured at a typical 24 inches move within two seasons. We see hinge post lean and middle sag on double gates because the footing was too shallow. The fix is a new 36-inch-by-18-inch footing with a rebar cage, which we do regularly.
- Stripped racks on gravel drive slides: A slide gate on a gravel drive needs a properly aligned rack and a loop detector in the travel path. Without that alignment, the gate grinds, the rack strips, and the operator burns out early. We correct alignment and install the detector loop as part of any slide gate install.
- Swing gate operators without entrapment protection: Some Haslet homeowners buy a cheap opener online or hire a handyman who skips the photo-eyes and safety edges. A gate that cannot reverse when a child or a pet crosses the path is a liability. UL 325 requires entrapment protection and reversal testing. We install and test it on every swing gate we touch.
- Double gate sag from undersized hinges: Haslet’s wind and soil movement punish undersized hinges on double gates. We replace them with ball-bearing hinges sized to the leaf weight, then re-hang and re-square the gate so it closes like the day it was built.
Pricing for Gate Installation in Haslet, TX
We believe in an upfront price, settled before a single bolt is turned. Here are honest Haslet ranges based on what we have installed here.
- Pedestrian gate installation: $850 to $1,900, depending on steel vs. ornamental iron and hardware.
- Single swing driveway gate with operator: $3,800 to $7,200, including footings, gate, operator, and safety sensors.
- Double swing driveway gate with operator: $6,500 to $12,500. Wide driveways and heavy steel leaves push toward the upper end.
- Sliding gate with operator on gravel or concrete: $5,200 to $10,800. Loop detectors and rack length affect the final number.
- Security gate with access control keypad and lock: $4,500 to $9,800, including wiring and one keypad or intercom.
Haslet’s clay means post footings here take more concrete and rebar than in sandy-soil suburbs, and that is reflected in the quote. We do not charge for surprises. The price we quote is the price you pay, and the work is covered by the 90-Day Done Right Promise. Call (817) 562-7979 for a free measure and a written estimate.
We Also Serve Cities Near Haslet
Ironworks Gate Co. serves Gate Installation in Haslet and the surrounding communities, including Keller, North Richland Hills, Haltom City, and Azle. If you live on the Haslet side of Keller or down toward Haltom City, we can usually schedule a measure within a day.
Serving Haslet, TX - Our Local Coverage Area
We’re based in the Haslet area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Haslet
In Haslet, a gate post footing should be at least 36 inches deep and 18 inches wide, with a rebar cage, because the expansive clay here moves more than the soil in neighboring suburbs. We refreshed a gate in the Sendera Ranch subdivision where the original hinge post had been set only 24 inches deep and already leaned 3 degrees. Our team augered a 36-inch-by-18-inch footing with a rebar cage, reset the post, and re-hung the gates with new ball-bearing hinges. Call (817) 562-7979 for a footing assessment if your gate post is starting to lean.
Yes, we install operators on existing swing gates in Haslet all the time, provided the posts are plumb, the hinges are sound, and the gate leaf is not sagging. We check those first. If the gate is sound, we mount a LiftMaster, FAAC, or BFT operator, install photo-eyes or safety edges, and run the full UL 325 reversal test. If the gate is not sound, we tell you plainly what needs resetting before the operator goes on. Call (817) 562-7979 and we will come measure.
Before a sliding gate goes on a gravel driveway in Haslet, we set a concrete pad or V-track base, verify the rack alignment, and install a loop detector in the travel path so the gate reverses if a vehicle is present. On gravel, the base has to be level and compacted or the gate will bind. We do all of that as part of the install, and we test the full travel before we leave. Call (817) 562-7979 for a free on-site evaluation.
Yes, every gate installation or operator installation we do in Haslet includes UL 325 entrapment protection testing and a documented reversal test. We test the gate against an obstruction in both directions and adjust the force settings. If the gate cannot reverse safely, we do not leave it in service. You get a written 90-Day Done Right Promise that covers the work. Call (817) 562-7979 to schedule a measure.
A new double gate in Haslet sagging in the middle is almost always caused by shallow post footings in our expansive clay soil or undersized hinges. The posts move, the leaves drop, and the center gap opens. We fix it by removing and resetting the posts in 36-inch deep footings with rebar, then Gate Parts & Welding in Haslet to re-hang the leaves on ball-bearing hinges. Call (817) 562-7979 and Victor Salinas will come take a look and give you a straight answer.
Written by Victor Salinas, Owner at Ironworks Gate Co., a gate specialist serving Haslet and the DFW metro. For a free estimate, call (817) 562-7979.