Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Kennedale
When a driveway gate stops working in Kennedale, you need someone who understands the local clay soil, the post oaks, and what Texas thunderstorms do to gate electronics. Gate repair in Kennedale typically runs $160-$480 for most common fixes, and our crews are on the road to your neighborhood within hours. Ironworks Gate Co. has been doing this work since 1984. That is over 42 years of hinges, operators, and welding, done right and backed in writing. If your gate is sagging, grinding, or not opening at all, call (817) 562-7979. A live person picks up, 24 hours a day, seven days a week. No voicemail trees, no callback queues.
Why Ironworks Gate Co. Is Kennedale’s Preferred Gate Repair Company
Kennedale homeowners have learned the difference between a generalist handyman with a toolbox and a gate specialist who knows what he is looking at. We are the second call, the one you make after the first guy could not figure out why the opener kept tripping. Our technicians work on gate systems every day. We are trained and equipped on nine automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That breadth matters, because the correct fix gets made on the first visit, not the third.
Our reputation in Kennedale is built on showing up when we say we will and fixing the actual problem, not the symptom. The 90-Day Done Right Promise sits behind every completed job. If something is not right, we come back and make it right. No arguments, no paperwork, no exceptions. Victor Salinas, our owner, set that standard years ago and it has not changed.
Our dispatch is coordinated from our Dallas-Fort Worth office, but crews serving Kennedale live and work in this corridor. They know the neighborhoods, the soil conditions, and the way a 30-year-old iron gate behaves after a wet spring. Background-checked, uniformed technicians on every job, working in your home the way they would work in their own mother’s.
Our Gate Repair Services in Kennedale
Electric Gate Repair
When an electric gate in Kennedale stops responding to the remote or keypad, the cause is usually straightforward: a blown capacitor, a failed limit switch, or corrosion in a low-mounted junction box after a thunderstorm. We diagnose the issue, explain it in plain English, and quote the repair before any work begins. Most electric gate repairs in Kennedale are completed in a single visit, with the price settled before a single bolt is turned.
Automatic Gate Repair
Automatic gate operators in Kennedale work hard in the heat and the rain. When the motor strains, the gate crawls, or the reverse safety system activates for no reason, it usually points to an alignment fault, a sensor problem, or a gear train wearing out. Our Gate Repair team has factory training on the operators found in this area, and we carry the common parts on the truck. That means a faster fix and fewer return trips.
Hinge & Post Repair
This is the most common call we run in Kennedale, and for good reason. The clay soil here holds water after rain and contracts during dry stretches. Hinge posts set too shallow or without properly packed footings lean forward over time. The gate sags, drags the ground, and eventually binds against the operator. We reset posts in new, deeper footings with proper gravel drainage, then rebuild the hinge assembly so the gate hangs true again. Done once, it stays done.
Gate Realignment
A gate that scrapes the driveway or no longer closes flush against the latch is working against its own alignment. In Kennedale’s clay-heavy soil, that misalignment often traces back to the post shifting beneath the surface, not just worn hardware. Our gate realignment service resets the geometry, adjusts the hinges, and verifies the operator is not fighting the frame. That last step matters. A realigned gate with an out-of-adjustment operator will drift back out of true within months.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Kennedale
Kennedale driveways are home to a mix of operator brands, and we service the ones that actually last. Viking operators show up on a lot of rural properties here, Ghost Controls on newer estate installations, and Elite on commercial-grade residential systems. We stock commonly needed parts for these brands and more, so we are not waiting on a warehouse in another state when your gate is stuck open at night. Whatever is mounted on your post, we can service it.
Common Gate Repair Problems We See in Kennedale Homes
After 42 years in this trade, we can almost predict what calls will come in from Kennedale based on the season. Here are the four we see most often:
- Sagging swing gates from leaning hinge posts. The clay soil around Kennedale swells with spring rain and shrinks in August heat. Posts without deep, packed footings shift a little each cycle. Eventually the gate drags the driveway and the operator strains against the extra load.
- Slide gate rollers jammed with sandy loam and crushed granite. Many properties in Kennedale have unpaved or semi-paved driveways. That loose material finds its way into the roller track, hardening into a paste that stops the gate dead. Regular track cleaning and roller replacement keeps the operator from burning out prematurely.
- Keypad and loop detector failures after thunderstorms. Moisture invades low-mounted junction boxes and sensor housings when heavy rain pools around the post base. Corrosion follows, and the gate stops recognizing remotes or detecting vehicles. We seal, replace, and reposition these components above grade wherever possible.
- Rust through on older wrought-iron gates. Iron gates in Kennedale sit outside in humidity and rain for decades. Rust blooms at the weld points and bottom rails first. If caught before the metal fails, we grind, treat, and re-weld. Full panel replacement is not always necessary, and our Kennedale customers appreciate hearing that.
How Kennedale’s Soil Changes the Repair Picture
In Kennedale, where post oak and clay soil dominate, gate posts set without deep, properly packed footings shift with seasonal moisture changes, causing sagging and operator misalignment. This is a repair need that differs from the rockier soil just north in Arlington. The clay here expands when wet and contracts when dry, which means a post that was plumb in March can be leaning two degrees by September. That two-degree lean translates to a gate that drags the ground on the latch side and eventually destroys the operator’s gear train. When we reset a post in Kennedale, we dig deeper than the standard recommendation, pack the footing in lifts, and add gravel at the base for drainage. It takes longer. It costs a little more. It also means you will not be calling us back for the same problem next spring.
Our tech drove out to a home near the Kennedale Public Library where a LiftMaster swing gate had been dragging the gravel for a month. The hinge post had rotated just enough to throw the rack and pinion out of alignment, and the safety photocell was crusted with red clay. We reset the post in a new, deeper footing, realigned the operator, and had the entrapment protection cycling clean before noon. That is the job done right: address the cause, not just the symptom.
Pricing for Gate Repair in Kennedale, TX
A typical gate repair in Kennedale runs between $160 and $480. Here is what that looks like by the job:
- Hinge replacement or adjustment: $160-$260
- Post reset with new footing: $380-$750, depending on gate size and access
- Operator capacitor or limit switch replacement: $180-$320
- Photocell or safety sensor replacement: $140-$240
- Weld repair on a wrought-iron gate: $180-$400, depending on the length of the crack
The price is quoted and agreed before any work starts. No surprises on the bill. If your gate needs a part we have on the truck, the job is usually done same day. If a specialty part has to be ordered, we will tell you the timeline and the total cost before we order it. Call (817) 562-7979 for an exact quote. Estimates are free. We also offer $50 off any repair over $250, a free second opinion on any written estimate, and an $89 seasonal tune-up. Seniors and veterans always get 5% off.
We Also Serve Cities Near Kennedale
Ironworks Gate Co. handles gate repair for homeowners across Kennedale and the surrounding cities. If you are in Fort Worth, Haltom City, Hurst, or Bedford, the same crews and the same guarantee apply. Call (817) 562-7979 and a live person will answer.
Serving Kennedale, TX - Our Local Coverage Area
We’re based in the Kennedale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Kennedale
In Kennedale’s expansive clay, a gate post for a standard driveway gate should be set at least 30 to 36 inches deep, with gravel at the base and concrete packed around the post, not dumped in dry. We dig below the shifting zone so the post stays put through wet and dry seasons alike. Call (817) 562-7979 if you want someone who knows Kennedale soil, not just a generic hole dig.
Direct sunlight at certain angles overwhelms the photocell receiver, mimicking a reflected beam and telling the operator something is in the path. In Kennedale, southeast-facing gates get this in the morning, and southwest-facing gates in the late afternoon. We reposition the cells, add shrouds, or swap in a sun-rated model. Call (817) 562-7979 and we will sort it out.
Yes, in most cases. We grind back to clean metal, treat the corrosion, and re-weld or rebuild the affected section. Only when the metal has rusted through to the point of structural failure do we recommend replacing a panel. Call (817) 562-7979 and we will give you an honest assessment, free.
Water intrusion into the control board or a low-mounted junction box is the usual culprit. Kennedale storms bring heavy rain fast, and if water pools around the post base, it works its way into the enclosure. We reseal, replace damaged boards, and raise vulnerable components above grade. Call (817) 562-7979 for a proper diagnosis.
Open the gate halfway and lift the latch end. If the whole gate moves and the post shifts, the post footing has failed. If the gate moves but the post stays solid, the hinges are worn. We check both on every Kennedale sagging gate call, because in this soil the post is usually at least part of the problem. Call (817) 562-7979 and we will tell you exactly what you are dealing with.
Call Ironworks Gate Co. for Gate Repair in Kennedale
If your gate is not working, call (817) 562-7979. A live person answers. We will talk through the problem, schedule a visit, and give you a written price before any work begins. Done right, backed in writing, and you will never think about that gate again. That is the point.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Kennedale and the surrounding Dallas-Fort Worth area since 1984.