Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair Services in Bedford, TX
When a driveway gate stops closing in Bedford, you don’t need a lecture about metallurgy. You need a technician who knows the difference between a Ghost Controls swing arm that lost its limit and a hinge that’s been grinding since the spring rains. That’s what we do. Ironworks Gate Co. answers the phone around the clock at (817) 562-7979, and we keep a live person on the line, not a recording. Most Gate Access Control - Bedford failures we fix on the first visit, with the price settled before we touch a bolt.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Bedford Homeowners Choose Ironworks Gate Co.
Bedford’s oldest neighborhoods were built when a gate meant ornamental iron hung on posts sunk in Blackland Prairie soil. That soil moves. Summer droughts shrink it, fall rains swell it, and over thirty years of that cycle, a gate post drifts just enough to throw the latch out of line. We’ve worked on gates in Woodland Heights and Meadowbrook that haven’t closed square since the late 1990s, and we know the fix isn’t a new operator… it’s reshimming the post and truing the hinge line. Our technicians are background-checked and uniformed, and they work the way they would in their own mother’s driveway. Victor Salinas sets the standard on every job, and every Bedford repair we complete carries our written 90-Day Done Right Promise. If it isn’t right, we come back. No paperwork, no argument.
Gate Repair Services We Offer in Bedford
Gate Repair
Warped pickets, sagging hinges, a cantilever slide that’s carrying more rust than roller. We diagnose what actually failed, not what’s easiest to bill. Most Bedford repair calls finish same visit, and the quote is agreed before work starts.
Learn more about our Gate Repair in Bedford.
Gate Installation
New driveway gate or a full yard enclosure for a pool code requirement. We measure, order, weld where needed, and set posts deep enough for Bedford’s shifting clay. Written price before we start, and the installation is done to outlast the warranty.
Learn more about our Gate Installation in Bedford.
Gate Motor & Opener
If your opener is a LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, or Mighty Mule, our techs are trained on it. We carry most common boards, arms, and receivers so the correct repair happens on the first visit.
Learn more about our Gate Motor & Opener in Bedford.
Gate Access Control
Keypads, intercoms, telephone entry, vehicle loops, and remotes. We match the new hardware to the existing opener and to how your family actually uses the gate, not some catalog default.
Gate Parts & Welding
Broken hinge, sheared post cap, a gate that’s sagging because a weld finally let go after two decades. Our Bedford Gate Parts & Welding shop handles repairs properly, which is why a 40-year-old gate can still close like the day it was hung.
Neighborhoods We Serve in Bedford
We run calls across all of Bedford, from the older post-war streets near Central Bedford to the newer subdivisions on the west side, and we’re serving Hurst, TX too. Our typical response for gate repairs in Bedford is same-day or next-morning, depending on the call time.
- Woodland Heights
- Meadowbrook
- Trinity Lakes
- Bedford Meadows
- Shady Brook
Why Bedford’s Climate & Housing Affect Gate Repair
Bedford’s two soil stressors are drought and clay swell, and both do more damage to gate posts than any windstorm. During the July-August dry stretch, the ground pulls away from concrete foundations, and gate posts set in shallow footings start to lean. Then the October rains come, the clay expands, and the lean becomes permanent. That’s the number one cause of a Bedford gate that won’t latch or drags against the striker post. Add in the salt-and-humidity air from proximity to the Trinity River bottom, and mild steel on older gates corrodes at the lower hinge first. We see it on almost every pre-1990 gate in Bedford, and we rebuild the hinge with sealed bearings instead of just greasing the old one.
Pricing for Gate Repair in Bedford
Gate repair in Bedford runs the range based on what actually broke. We quote the job before work begins, so there’s no surprise on the bill.
- $89 Seasonal Tune-Up: Full inspection, lubrication, limit check, and safety sensor test.
- $250-$550 typical repair: Hinge replacement, wheel and roller swap, latch adjustment, or minor welding.
- $550-$1,100 opener repair: New control board, limit assembly, or receiver on most brands.
- $1,100-$3,200 full opener replacement: Installed, programmed, and tested, with the right residential model for your gate.
Call (817) 562-7979 for an exact quote. And remember: $50 off any repair over $250, plus our standing 5% Senior and Veteran discount.
Service Area - Cities Near Bedford
We also serve homeowners just beyond Bedford’s city limits in Hurst, North Richland Hills, Haltom City, and Keller. Same teams, same standards, same written guarantee.
Serving Bedford, TX - Our Local Coverage Area
We’re based in the Bedford area and know this community well, and we’re also serving North Richland Hills, TX. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Bedford
Most Bedford gate repairs fall between $250 and $550, with opener replacements running higher depending on the make. We give you a firm price before we start, and we never upcharge after the fact. Call (817) 562-7979 for a free estimate specific to your gate.
In most Bedford neighborhoods, yes. Same-day service is common for broken hinges, failed openers, and off-track slide gates in Bedford. The dispatcher will give you an honest arrival window when you call (817) 562-7979.
We’re factory-trained on nine major brands including Ghost Controls, DoorKing, and Elite. If your Bedford gate has an oddball board from the early 2000s, we can usually match it or upgrade the opener without replacing the whole gate.
Post setting, gate fabrication or assembly, hinges, latch, opener (if requested), safety sensors, and programming. We handle the whole job including any concrete work, and we don’t leave until the gate opens and closes correctly in both directions.
Not usually. Most Bedford sagging gates just need hinge repair or post straightening, not full replacement. We’ll tell you honestly which one you need, and we’ll show you the wear before we quote anything.
If you have a gate problem in Bedford, call us at (817) 562-7979. A real person answers, and we’ll set a time that works for you. Estimates are free, and every job carries the 90-Day Done Right Promise.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Bedford, TX.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Bedford Customers Say
"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Eric Padgett"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one on the truck, and we were moving cars again inside an hour."
- Chris Gallagher"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and put a surge protector on the line so hopefully it does not happen again."
- Layla Haddad