A Ironworks company - serving Fort Worth, TX

Ghost Controls Gate Repair in Azle, TX

Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Styles & brands we work with

Wrought iron
Wrought iron
Wood & steel frame
Wood & steel frame
Farm & ranch
Farm & ranch
Sliding driveway gates
Sliding driveway gates
LiftMaster operators
LiftMaster operators

Before & after – our own jobs

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Ghost Controls Gate Repair in Azle, TX | Ironworks Gate Co.

Gate Repair in Azle for Ghost Controls is what we handle most weeks, and the quick answer is this: we’re an independent service company that repairs Ghost Controls swing and slide operators across every corner of Azle, from ranchettes off FM 730 to lake properties near Eagle Mountain Lake. What makes our Ghost Controls work here different is simple. We know how Azle’s clay soil, ice storms, and solar-heavy driveways strain these operators in ways a Dallas or Fort Worth tech will misdiagnose. Call (817) 562-7979 and you’ll get a live person who can talk Ghost Controls boards, actuators, and battery banks without putting you on hold.

Call (817) 562-7979

Why Azle Residents Choose Us for Ghost Controls Service

Most gate companies treat Ghost Controls as an afterthought. We don’t. Our techs work on Ghost Controls AXD and TSS1 operators every week, and we carry the OEM boards, actuators, and receivers that keep these systems running rather than asking you to “wait on a part.” We’re independent, which matters. We’re not tied to Ghost Controls’ dealer network, so we can repair across mixed-brand setups, give you honest repair-versus-replace numbers, and never upsell you toward a brand we prefer.

Victor Salinas, our owner, grew up around ornamental ironwork in Fort Worth’s Polytechnic Heights neighborhood, where his grandfather welded gates and railings out of a small shop behind the house. That’s the standard we bring to every Azle job: metalwork that holds square, and electrical work that’s diagnosed properly the first time. If the gate doesn’t open when it should and close when it should, nothing else about it matters much. We’ve been at this over 42 years, and our Ghost Controls sales & service work is backed by the 90-Day Done Right Promise, in writing, on every job.

Common Ghost Controls Gate Repair Problems We Solve in Azle

Here’s what actually fails on Ghost Controls systems around Azle, and why:

  • AXDP control boards losing wireless remote pairing. Azle’s exposed overhead power feeds on acreage lots make lightning and surge damage a regular occurrence. The board’s capacitor takes the hit, and suddenly your remotes won’t pair. We test, confirm, and replace with OEM boards when the repair makes sense.
  • Solar-charged battery banks draining early. On FM 730 and FM 199 ranchettes, solar is the default power source, not a backup. When the panel angle drifts because a clay-heaved post shifted, the battery bank never fully charges. We re-level the panel, test the charge controller, and load-test the batteries before condemning anything.
  • AXD arm actuators binding after ice storms. North Texas ice seizes hinges and makes gates fight their operators. When a gate is forced open while frozen, the actuator’s internal gears strip. We open the arm, inspect the gear set, and tell you honestly whether rebuilding beats replacing.
  • Photo-eye misalignment on TSS1 slide operators. Concrete slide tracks in Azle move with shrink-swell clay. The gate shifts a half-inch, the photo-eye beam breaks, and the operator refuses to close. Sometimes it’s a quick realignment. Sometimes the track needs re-setting. We check before we guess.
  • Gate posts heaving out of plumb. Blackland clay expands when wet and cracks when dry. Posts tilt, gates bind, and operators strain until something breaks. We re-set posts rather than cranking hinges and calling it fixed.

Ghost Controls Service in Azle: What Local Conditions Mean for Your Equipment

Azle sits on shrink-swell Blackland and red clay soils, and that single fact explains more Ghost Controls failures here than any other variable. When the ground swells after a hard rain, gate posts heave. A post that moves a quarter-inch throws the gate leaf out of square, which makes the AXD arm actuator work harder every cycle until the motor or the gears give out. Then the clay dries, contracts, and the post settles somewhere new. This seasonal movement is baked into Azle’s ranchette corridor, where gates span ten-foot openings on long gravel drives and get cycled six, eight, ten times a day. A Ghost Controls board that lasts eight years on a Fort Worth cul-de-sac property might fail in five here, not from a defect but from the operator fighting a seasonally shifting gate. We re-level posts and re-square leaves before they eat another actuator. That’s the repair most generic gate pages never mention, because it comes from working Azle soil, not reading a manual.

Ghost Controls Models & Products We Service in Azle

We service the full Ghost Controls lineup you’ll find on Azle driveways: the AXD Series swing operators (AXDP and AXD models for single and double gates), TSS1/TDS1 heavy-duty slide operators, AXZL ZombieLock accessories, and the solar panel and battery kits that power the rural systems. When a repair preserves the operator’s useful life, we use OEM Ghost Controls boards, actuators, and receivers. When OEM lead times would leave your ranchette gate unsecured, we install quality aftermarket batteries, photo-eyes, and keypads, and we tell you which we’re using before we do it. On older AXDP units with a seized arm actuator and a burned board, we will quote both paths: repair, or a full operator swap. Sometimes the numbers say the new kit is the square deal.

Ghost Controls Service Pricing in Azle

Most Ghost Controls repairs in Azle land between $180 and $480 depending on what failed. A diagnostic visit with repairs runs toward the lower end when it’s a photo-eye realignment or a battery replacement. A new OEM control board runs higher. A full operator replacement with Azle Gate Installation, board and actuator together, typically runs $650 to $1,200 installed. Every price is quoted and agreed before we turn a single bolt, and the number you approve is the number you pay. We also stand behind the work with the 90-Day Done Right Promise, so if something isn’t right, we come back and make it right. Call (817) 562-7979 for an exact quote. Estimates are free.

Serving Azle, TX - Our Local Coverage Area

We’re based in the Azle area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.

FAQs - Ghost Controls Gate Repair in Azle

Service Areas Near Azle

We service Azle and the surrounding communities where Ghost Controls operators are common: Azle service area covers the ranchette corridors off FM 730 and FM 199, plus Ghost Controls service in Fort Worth, Ghost Controls service in Aledo, along with Benbrook, Briar, and Haltom City. If you’re within a short drive of Azle, we’ll be there.

Book Your Ghost Controls Service in Azle Today

Call (817) 562-7979 for a free estimate on Ghost Controls repair in Azle. A live person answers around the clock, and in most cases we can have a tech at your gate the same day. The price is agreed before work starts, and the job is backed in writing.

Written by Victor Salinas, Owner at Ironworks Gate Co., serving Azle since 1984.

Need Gate Repair help in Azle? Licensed & insured · 1-hour response · free estimates
Call (817) 562-7979
Local Service Coverage

Request a Free Estimate in Azle

Tell us what you need - Ironworks Gate Co. responds fast. No obligation.

By providing your information above, you agree to the terms of our Privacy Policy and agree that you may be contacted by telephone, text message, or email about your request, including by the independent professionals who may fulfill it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch