Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Azle
Gate installation in Azle runs $1,400-$11,500 depending on the gate type, opener, and site work involved. A standard single swing gate with a basic opener typically lands between $1,400 and $4,200, while a custom slide gate on a ranchette driveway with solar power often runs $4,800-$9,500. We’re Ironworks Gate Co., and we install and automate driveway gates across Azle every week, from the FM 730 corridor to the shoreline communities around Eagle Mountain Lake. Call (817) 562-7979 and you’ll get a real person on the phone, day or night, not a menu.
Azle isn’t a cookie-cutter suburb. It’s semi-rural ranchette country, where driveways are measured in hundreds of feet rather than car lengths, and a gate is what keeps the dogs in, the odd loose cow out, and the kids safe from FM road traffic. That changes how a gate should be built, anchored, powered, and automated. We’ll get into the specifics below.
Why Ironworks Gate Co. Is Azle’s Preferred Gate Installation Company
Victor Salinas founded this company in 1984, and the rule from day one was simple: build it like it’s going on your own mother’s driveway. That’s why our technicians arrive in uniform, background-checked, and carrying a written 90-Day Done Right Promise on every job, no exceptions. If something isn’t right after we leave, we come back and make it right. No paperwork, no arguing.
Our Gate Installation team works Azle throughout the week. The difference shows in the details that matter here. We know the Blackland clay up and down FM 730. We know which setbacks on Eagle Mountain Lake lots leave no room for a swing gate, and we know how to make a slide gate work on a shared driveway with a tight right-of-way. That’s not abstract knowledge. It comes from doing the work in Azle, and it’s why homeowners here call us first when a gate needs to be done correctly the first time.
For Azle specifically, the value of a live person answering the phone can’t be overstated. When a gate operator fails at 9 p.m. and the gate is stuck open, you don’t want a voicemail. You want a plan. We answer, 24/7, and we’ll tell you straight what to do, whether that’s a temporary manual release or a next-morning service call to your property off Confederate Park Road or Ash Creek.
Our Gate Installation Services in Azle
We install and automate every gate type you’ll find on an Azle property. Four of them cover most of what we’re asked to do:
Driveway Gate Installation in Azle
On Azle’s 1-10-acre lots, the driveway gate is the front door. We build for daily use: multiple open-close cycles, horse trailers and ranch trucks, kids on four-wheelers, delivery drivers. A properly installed driveway gate in Azle needs a footing below the clay line, hinges sized for the gate’s actual weight, and an opener matched to the load, not to the price tag. We handle all of it, from first measurement to final automation test.
Pedestrian Gate Installation in Azle
Most Azle properties with a driveway gate also need a separate pedestrian gate, especially on shared driveways and ranchette entrances. We build walk gates that match the driveway gate in material, finish, and hardware, so the whole entry looks deliberate rather than tacked on. A well-built pedestrian gate with a self-closing hinge and a keyed latch also keeps the liability down when a pool, pond, or livestock area sits behind it.
Sliding Gate Installation in Azle
Sliding gates are the workhorse on Azle’s tighter lots and shared driveways, where a swing gate would arc across the neighbor’s easement or into a fence line. We install both cantilever slide gates, which roll above ground without a track through the drive, and rack-and-pinion slide gates with a ground track for heavier spans. On a shared driveway off FM 730 near Eagle Mountain Lake, our crew installed a Viking slide gate on a rack and pinion system for a ranchette with a tight right-of-way. We set the post footing below the clay line, wired a solar gate opener with a battery bank, and routed a safety photocell around the pedestrian path so the gate kept working without a trench.
Swing Gate Installation in Azle
A swing gate is the classic look for Azle’s ranch-style homes: ornamental iron or pipe rail, dual leaves opening inward over gravel. We install single and double swing gates, and we’re particular about post depth because we’ve seen what Azle clay does to a gate that’s only anchored shallow. If the ground heaves, the gate binds. We set footings deep enough to stay put, then we hang the gate so it clears the ground through a full freeze-thaw cycle.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Azle
We’re trained and equipped on nine gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In Azle, we see a lot of Ghost Controls and Mighty Mule openers on older ranchette gates, and a growing number of DoorKing and Viking systems on newer solar-powered installs. Because we service all of them, we diagnose what’s actually on your property without telling you to replace it first and ask questions later. Parts for Azle jobs ship from our Dallas-Fort Worth office, and in most cases we complete the install in a single visit.
Common Gate Installation Problems We See in Azle Homes
- Post heave from shrink-swell Blackland clay. Azle sits on clay that expands after rain and cracks during drought. A post set in a standard 36-inch footing can be out of plumb within a season, binding the gate or throwing the latch off. We set footings below the active clay line and backfill with gravel so water doesn’t sit against the post.
- Swing gates that don’t fit the shared driveway. Many Azle driveways off FM roads are shared, with a right-of-way too narrow for a dual swing gate’s arc. A slide gate often solves it, but only if there’s room for a backframe or a cantilever design. We assess the actual space before quoting, not after the concrete is poured.
- Solar openers with undersized battery cables. On Azle’s long rural drives, trenching power from the house can run into the thousands, so solar is common. But a solar opener wired with thin battery cables will drop below the operator’s low-voltage threshold after a few cloudy days. We size the cable, battery bank, and solar panel for the real draw, so the gate still opens on day five of a North Texas overcast stretch.
- Ice-storm damage to ornamental iron. Periodic North Texas ice seizes hinges and snaps welds on decorative iron gates. We see it every winter in Azle. When we install, we use cold-rated lubricants and weld joints that can take a freeze cycle without cracking.
Pricing for Gate Installation in Azle, TX
Here’s what we quote in Azle, based on work we’ve actually done in this market:
| Job Type | Typical Azle Range |
|---|---|
| Single swing gate, steel or ornamental iron, no opener | $1,400-$3,800 |
| Double swing gate with opener | $3,200-$7,500 |
| Slide gate with rack and pinion track | $3,800-$8,200 |
| Slide gate with solar opener and battery bank | $4,800-$9,500 |
| Pedestrian gate, welded to match driveway gate | $700-$2,100 |
| Full custom gate plus trenching and power run | $6,500-$11,500+ |
The biggest cost drivers in Azle are post footing depth in clay, solar versus trench power, and gate length on wide ranchette drives. We quote a fixed price before any work starts, and that’s the price you pay. No surprises on the bill. Call (817) 562-7979 for a free estimate, and remember we offer $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a 5% senior and veteran discount, always.
We Also Serve Cities Near Azle
Ironworks Gate Co. covers Azle and the surrounding communities, including Haslet, Aledo, Keller, and Haltom City. Our crews dispatch from the Dallas-Fort Worth office and arrive in Azle on a normal service schedule. If you’re just outside Azle, you still get the same local knowledge and the same written 90-Day Done Right Promise. See our Gate Installation in Azle page for more on exactly where we work and how quickly we can get to you.
Serving Azle, TX - Our Local Coverage Area
We’re based in the Azle area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Azle
A gate post footing in Azle should go 42-48 inches deep, below the active shrink-swell layer of Blackland and red clay, with a gravel base and a concrete collar that extends above grade. Shallower footings heave, and a heaved post means a gate that binds and a latch that stops lining up. Call (817) 562-7979 and we’ll confirm the depth for your specific soil and gate weight before quoting.
Usually, yes, if there’s room for a backframe or if we use a cantilever slide design. The key is matching the slide mechanism to the actual space, not forcing a standard track system into a right-of-way it won’t fit. We measure the driveway, the easement, and the approach before recommending a design, and we install the gate so both neighbors keep full access while it’s in use.
An automated gate in Azle must meet UL 325 entrapment protection standards, which means safety photocells or contact edges at the gate’s open and close paths, and a reversing mechanism that stops the gate if something is in the way. We install and test every safety device on every automated gate, and we won’t leave a gate running without them. That’s non-negotiable, and it’s spelled out in our written 90-Day Done Right Promise.
If your gate sits more than 150 feet from the house panel along an FM road driveway, trenching power is likely cost-prohibitive, and a solar-charged battery opener is the practical choice. We size the solar panel and battery bank for your gate’s duty cycle and for North Texas cloudy stretches, so the gate doesn’t go dead in week two. Schedule a free estimate at (817) 562-7979 and we’ll walk the site and give you a straight answer.
We stage the job so the pedestrian route stays open the entire time, and we coordinate with both property owners before we start. That means temporary barriers, clear signing, and a schedule that gets the gate hung and operational as quickly as possible. On shared driveways, we treat both sides as the customer, and we leave the entry cleaner than we found it.
Call Ironworks Gate Co. for Gate Installation in Azle, TX
If your driveway gate is sagging, the opener is failing, or you’re ready to put in a gate that will outlast the next three North Texas ice storms, call (817) 562-7979. We’ll give you a free, fixed-price estimate, put it in writing, and stand behind the finished job with our 90-Day Done Right Promise. No voicemail trees, no callback queues. A real person answers, 24 hours a day, 7 days a week. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Azle and the Dallas-Fort Worth area since 1984.