Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Everman
Gate access control in Everman, TX means giving you a way to open and close your gate without rolling down a window, fumbling for a remote that fell under the seat, or walking out to the driveway in the rain. Most Everman homeowners call us when a keypad quits responding, a phone entry system stops ringing inside the house, or they want to add a video intercom so they can see who’s at the gate before they open it. We serve the whole city from the Sun Valley subdivision to the older streets off Trammell Avenue, and we answer the phone 24 hours a day at (817) 562-7979. A real person, every time.
Victor Salinas has built Ironworks Gate Co. around a simple idea: a gate should open when you want it open, close when you want it closed, and not surprise you with a bill you didn’t agree to. We quote the job before we touch a single bolt, and we back every completed job with our written 90-Day Done Right Promise.
Why Ironworks Gate Co. Is Everman’s Preferred Gate Access Control Company
Everman has a particular mix of homes built between the 1950s and the 1990s, many with original gates and openers that have seen two or three decades of North Texas weather. We’ve worked on gates along Enon Drive, through the streets around Everman Cemetery, and in subdivisions near Johnson Park Road. We know the difference between a gate that needs a new keypad and one that needs its entire control loop rewired because the concrete driveway has cracked and swallowed the loop detector.
Our Gate Access Control team is trained on nine automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. When a homeowner in Everman calls with a dead Viking operator after a storm, we don’t guess. We test, we isolate, we fix. Most jobs are completed in a single visit.
We’re not the cheapest bid in town, and we’re comfortable saying that. Everman homeowners who’ve been let down by a one-truck operation that disappears after the invoice clears tend to appreciate a company that’s been serving the Dallas-Fort Worth metro for over 42 years, since 1984. We plan to be around for another forty, and we work in your driveway the way we’d work in our own mother’s.
Our Gate Access Control Services in Everman
Keypad Entry
Keypad entry systems are the most common access control we install and repair on Everman gates. These are the boxes mounted on a gooseneck post or the gate frame itself, where you punch in a four- to six-digit code and the gate swings or slides open. On Everman’s compact lots, we often mount keypads closer to the driveway cut than the gate itself so you can reach them without pulling your vehicle past the property line. A typical wired keypad replacement in Everman runs $180 to $320, installed.
Wireless keypads run $150 to $250 and are a good fit when running conduit across an old driveway isn’t practical. We set every keypad with a unique master code, and we show you how to add or remove user codes before we leave.
Phone Entry
Phone entry systems let a visitor press a button at the gate and ring your landline or cell phone. On Everman properties where the house sits far back from the street, often on the older lots north of Everman Parkway, phone entry is the difference between walking to the gate and answering it from your kitchen. A basic single-line phone entry unit in Everman runs $400 to $750 installed, depending on whether we’re tying into an existing gate operator or adding a new one.
Cellular phone entry, which doesn’t require a landline at all, is a popular upgrade here and runs $600 to $900. If your phone entry keeps dropping calls when someone rings from the gate, that’s often a signal or wiring issue we can diagnose on the first visit.
Video Intercom
A video intercom means you see who’s at the gate before you open it, on a monitor inside the house or on your phone. For Everman homeowners, this matters. The town’s mix of residential and light commercial zoning means delivery trucks, meter readers, and occasionally the wrong driveway all come through. A wired video intercom system in Everman typically runs $900 to $2,200 installed, depending on camera quality, night vision capability, and whether we’re adding a smartphone app.
We honestly tell every Everman customer the same thing: a video intercom is a convenience upgrade, not a security system. What it gives you is certainty about who’s standing at your gate, which for many of our customers is worth the cost.
Card Reader
Card readers are used more on shared driveways and small ranches on Everman’s eastern edge than on single-family homes. If you have a caretaker, a tenant, or regular delivery access, a card reader gives you a simple fob or card that opens the gate without a code. Standalone card reader systems in Everman run $350 to $600 per reader, with multi-card fob packs typically $10 to $15 per fob.
We wire card readers into the same control board as your keypad and remote receiver, so you have one system that answers to a card, a code, or a button press.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Everman
Everman homeowners run a variety of gate operators, and we’re certified to work on the ones you actually have. We stock parts locally for Viking, DoorKing, and Elite systems, which means a control board failure doesn’t turn into a two-week wait for a freight shipment. We also service Ghost Controls and the other major brands, but those three tend to show up most often on gates across Everman. If your operator is still under manufacturer warranty, we’ll handle the claim paperwork for you.
Common Gate Access Control Problems We See in Everman Homes
Everman’s weather and housing stock create predictable failure patterns. Here’s what we run into most often, and what we actually do about it:
- Storm-killed control boards. Frequent lightning across southern Tarrant County kills control boards on older electric operators. The keypad goes dark, the remote does nothing, and the gate stays locked. We can replace a control board on most brands same-day because we stock parts locally. The fix is the board, not the motor, most of the time.
- Loop detectors buried in cracked concrete. Many Everman driveways are original to the house. The loop detector wire embedded in that concrete works until the slab cracks and severs the wire. Your gate stops opening automatically for your car, and you’re stuck using a remote or keypad. We cut a new loop slot and wire it into your existing system without tearing up the whole driveway.
- Swing gates sagging after heavy rain. Standing water around the hinge post softens the soil, the post shifts, and the gate leaf starts dragging. It’s a post or hinge issue, not an access control issue, but it kills keypads and operators because the gate fights the motor every time it moves. We level and reset the post before we touch the electronics, because the best keypad in the world won’t help a gate that can’t swing.
- Phone entry systems dropping calls. Everman’s older copper phone lines, combined with gate stations mounted far from the house, cause ring failures and dead air when visitors press the call button. A cellular upgrade solves this permanently and usually doesn’t require trenching new wire.
Pricing for Gate Access Control in Everman, TX
Here’s what you can expect to pay for gate access control work in Everman, as of 2026. These are real ranges for this market, not national averages:
- Keypad replacement or new install: $180-$320
- Phone entry system (single line): $400-$750
- Cellular phone entry system: $600-$900
- Video intercom with monitor: $900-$2,200
- Card reader, single unit: $350-$600
- Loop detector repair or replacement: $275-$500
- Control board replacement: $250-$650 depending on brand
What affects your price in Everman is usually the distance from the house to the gate, whether we’re trenching under an old driveway versus running wire along a fence line, and the brand of operator you already have. We provide a free estimate, and the price we quote is the price you pay, agreed in writing before any work starts. There are no surprises on the bill.
Standing offers for Everman customers: $50 Off Any Repair Over $250, a Free Second Opinion on Any Written Estimate, an $89 Seasonal Tune-Up, and a permanent 5% Senior and Veteran discount.
We Also Serve Cities Near Everman
Our gate access control work for Everman routinely takes us into the surrounding communities. If you’re in Fort Worth, Aledo, Azle, or Benbrook, we can handle gate repair, installation, and access control there too. Call us at (817) 562-7979 and we’ll tell you honestly whether we’re the right fit for your job and your schedule.
Serving Everman, TX - Our Local Coverage Area
We’re based in the Everman area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Everman
In almost every case we see in Everman, it’s the hinge post. The soil around the post gets saturated, the post shifts or heaves, and the gate leaf drops. We level and reset the post, check the hinges, and test the operator before we call it done. Call (817) 562-7979 and we’ll take a look. Estimates are free.
You don’t strictly need a loop detector. A keypad and remote receiver will open a slide gate fine. But if you want the gate to open automatically as your car pulls up, and to stay open while your car sits in the path, you need a working loop detector in the driveway. Many Everman homes with cracked old concrete have dead loops, and we replace those regularly. Call us for a free site look and a written quote.
It can be, but more often it’s the gate station’s phone module or the copper wiring between the gate and the house. Everman’s older phone lines degrade over time, and gate stations mounted hundreds of feet from the house amplify that problem. We test the line before we sell you anything, and a cellular phone entry unit usually solves this permanently. Call (817) 562-7979 and we’ll diagnose it correctly the first time.
Yes, solar operators work well in Everman given the amount of direct sun we get through the year. A solar panel, battery, and compatible operator typically run $800 to $1,500 for the full install, depending on the gate type and brand. We’ll need to measure your gate weight and swing direction first. Call us for a free site assessment at (817) 562-7979.
A phone entry system lets a visitor talk to you. A video intercom lets you see them and talk to them. In Everman, where driveways often run tight along property lines and visitors can be delivery drivers, contractors, or the wrong turn entirely, the video option gives you certainty about who’s at the gate before you open it. Video intercoms cost more than phone entry, but for many homeowners here, that extra certainty is the whole point.
Call Ironworks Gate Co. for Gate Access Control in Everman, TX
If your gate won’t open, your keypad is dead, or you’ve been thinking about adding phone entry or a video intercom, give us a call. A real person answers 24 hours a day, 7 days a week. We’ll talk through what’s happening at your gate, tell you honestly what it will cost, and schedule a visit to Everman when it works for you. Most repairs are done in a single visit. Every job is covered by our written 90-Day Done Right Promise.
Call (817) 562-7979 for a free estimate. No pressure. No surprise on the bill. We’ll be there when we say.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Everman with gate access control, repair, and installation.