Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Everman
Gate repair in Everman usually means one of three things: a post that has shifted in the soil, an opener that has quit, or a gate that drags and binds. We fix all three, and we do it fast. Most repair calls in Everman are completed in a single visit, with the price agreed before we touch a bolt. If your gate is sagging, grinding, stuck open, or dead on the keypad, call us at (817) 562-7979 and a live person will answer. Not an answering service. A person who can schedule the truck.
We’ve worked on gates along Enon Avenue, through the neighborhoods off Shelby Road, and on the larger properties that back up toward Village Creek. Every area has its own failure patterns, and Everman’s are well known to us. The soil here moves with the creek. Gates here need footings that can handle it.
Why Ironworks Gate Co. Is Everman’s Preferred Gate Repair Company
We’ve been in the gate business for over 42 years, since 1984, and our work across Everman reflects the same approach we bring everywhere: fix the root cause, use the right parts, charge a fair price, and stand behind the job in writing. Our 90-Day Done Right Promise covers every repair we complete. If something is not right, we come back and make it right. No paperwork. No argument.
Our technicians are background-checked and uniformed, and they work under a simple set of rules we call the K.E.Y.S. code: Krafted right, Every time, Your home first, Standing behind it. Victor Salinas leads the team, and he holds every job to the same standard, whether it’s a hinge replacement off Wichita Street or a full automation repair near Everman High School. The 400th job gets the same care as the first.
We also answer the phone. Around the clock, seven days a week, a live person picks up. Everman homeowners do not get a voicemail tree when their gate refuses to open at 6:00 a.m. on a workday. They get us.
Our Gate Repair Services in Everman
Electric Gate Repair
When an electric gate stops responding, the fault is rarely the gate itself. In Everman, we most often find a failed photocell, a short in the buried loop, or an operator board that has been damaged by repeated stalling. Our technicians service nine major automation brands, so we diagnose the actual fault on the first visit and carry common parts on the truck. We test the full safety circuit, not just the motor, before we call the job done.
Automatic Gate Repair
Automatic gates in Everman take a beating from the local soil conditions. A gate that has shifted even an inch puts the rack and pinion under load every cycle, and that load eventually burns out the operator. We check gate alignment and operator health together, because fixing one without the other just means another service call in three months. We also handle loop detector failures, which happen often around here when silt from Village Creek flooding settles onto buried loops.
Hinge & Post Repair
Hinge posts in Everman loosen for a reason. Repeated saturation from creek overflows softens the ground, then dry spells shrink it, and the cycle works a post loose inside of a season or two. We excavate, reset the post in fresh concrete with a deeper footing, and re-hang the gate so it clears properly. This is the work that prevents the panel from sagging and the opener from burning out. It is also the single most common repair we perform in Everman.
Gate Realignment
A gate that drags on the ground or fails to latch is not just an annoyance. It puts load on the hinges, the post, and the opener every single cycle. We realign the gate, correct the post if needed, and adjust the operators so the system moves freely. When we finish, the gate should swing or slide like it did when it was first installed.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Everman
We are factory trained on the equipment most common on Everman driveways: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. When we arrive at a home with a Viking operator that has lost its limits, we know the programming sequence. When a DoorKing slide gate has jumped its track, we know the reset procedure. We keep common boards, remotes, photocells, and edge sensors stocked for quick turnarounds, and we can source less common parts faster than most generalist shops.
Common Gate Repair Problems We See in Everman Homes
- Posts that lean and panels that sag. The soil around Village Creek swells and shrinks seasonally. Post footings that were too shallow, or poured without proper drainage, shift within a few wet seasons.
- Openers that stall and burn out. When a gate is out of alignment, the operator works harder every cycle. The motor eventually overheats, trips its thermal protection, or burns out the board.
- Loop detectors that fail after heavy rain. Silt and debris from flood water collects on buried induction loops, and the gate starts behaving like the vehicle isn’t there. It stays open, or refuses to open.
- Rust and weld fatigue on older gates. Many Everman homes have original iron gates that are 20 or 30 years old. Wrought iron rusts from the inside out, especially at the bottom rail near ground level, and welds crack at the hinge points.
Pricing for Gate Repair in Everman, TX
A typical gate repair in Everman runs between $180 and $600, depending on what has failed. A simple hinge replacement or realignment usually lands between $180 and $320. Replacing a photocell or a loop detector typically runs $220 to $380. Post excavation and re-setting is heavier work, usually $450 to $850 depending on footing depth and concrete volume. Full operator replacement, including a new arm or slide motor, runs $900 to $2,400 depending on the brand and horsepower required.
We quote the full price before any work begins. The number we give you is the number on the invoice. No surprise add-ons after the gate is in pieces on the driveway. Everman residents also qualify for our standing offers: $50 off any repair over $250, a free second opinion on any written estimate, and an $89 seasonal tune-up. Seniors and veterans always receive a 5% discount.
We Also Serve Cities Near Everman
Our crews serve Everman and the surrounding communities, including Fort Worth, Aledo, Azle, and Benbrook. If you live near a neighboring town and need Gate Repair help, call us and we will route the nearest available tech. This page covers Gate Repair in Everman specifically, but the same warranties, pricing, and standards apply everywhere we work.
Serving Everman, TX - Our Local Coverage Area
We’re based in the Everman area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Everman
The post tilts because the footing is too shallow for Everman’s soil, which shifts with the wet and dry cycles around Village Creek. We excavate the old footing, dig deeper, and reset the post in fresh concrete with proper drainage so it does not move with the next heavy rain. Call (817) 562-7979 and we will assess your post and give you a firm price to set it right.
A loop detector senses a vehicle over a wire loop buried in the driveway and tells the gate to open, close, or hold. After flood water deposits silt on the loop or the wire insulation cracks, the detector fails and the gate behaves erratically. We test and replace loop detectors as a standard part of automatic gate repair in Everman. Call us for a diagnosis.
Yes, in most cases. Solar openers work well on single swing gates and light slide gates, and we install them regularly with battery backup for cloudy stretches. We will assess your gate’s weight, the panel orientation, and the shade from nearby trees before recommending a system. Estimates are free at (817) 562-7979.
No. Grinding and jumping means the gate is out of alignment, the track is damaged or obstructed, or the drive rack is worn. Left alone, it will destroy the operator. We fix the track, realign the gate, and replace worn rack sections so the gate moves cleanly again. Call us before the next rain makes it worse.
Automatic gates in Everman must have functioning entrapment protection, typically photocells across the gate opening and a reversing edge or current-sensing on the operator. To test: start the gate closing and place an object in its path. The gate must stop and reverse immediately. If it does not, stop using the gate and call us at (817) 562-7979. We test this on every repair call.
Call Ironworks Gate Co. for Gate Repair in Everman
If your gate is failing, sagging, grinding, or dead, call us at (817) 562-7979. A live person answers, day or night. We will schedule a visit to your Everman home, diagnose the real problem, and quote the full repair before any work begins. The price we quote is the price you pay. Every job is backed by our written 90-Day Done Right Promise. Victor Salinas and the Ironworks team have been doing this work for over 42 years, and we plan to be here for another forty.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Everman and the Dallas-Fort Worth area.