A Ironworks company - serving Fort Worth, TX
Gate Access Control in Richland Hills, TX | Ironworks Gate Co.

Gate Access Control in Richland Hills - Written Price, Install Date Set

Free on-site survey and a written price that includes the groundworks, the power run and the safety gear. Install date agreed before we order, and the system handed over tested and documented.

Call to schedule your free estimate

20+
Cities Served
Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Styles & brands we work with

Wrought iron
Wrought iron
Wood & steel frame
Wood & steel frame
Farm & ranch
Farm & ranch
Sliding driveway gates
Sliding driveway gates
LiftMaster operators
LiftMaster operators

Before & after – our own jobs

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Fast, Reliable Gate Access Control Across Richland Hills

Gate access control in Richland Hills typically costs between $450 and $2,800 depending on the system you choose: a basic keypad entry upgrade starts around $450, while a full smart access system with video intercom and phone entry runs $1,800 to $2,800 installed. We schedule most Richland Hills jobs within 2 to 4 business days, and repairs are often completed in a single visit. If your gate won’t open, your keypad is dead, or your intercom isn’t talking to the house, call us at (817) 562-7979 and a live person answers, day or night.

Call (817) 562-7979

We know Richland Hills because we work here every week. From the red-brick ranches west of Rufe Snow Drive to the newer additions near Baker Boulevard, we’ve seen what this ground does to gate equipment. Richland Hills sits on Eagle Ford Shale, and the expansive clay under these neighborhoods moves more than most homeowners realize. That movement is behind a lot of the access control failures we fix here, not bad electronics and not bad installs. It’s the dirt, and you need a gate company that understands it.

Why Ironworks Gate Co. Is Richland Hills’s Preferred Gate Access Control Company

We’ve been doing gate work for over 42 years, and Richland Hills is a market we take seriously. Homeowners here don’t call around looking for the cheapest bid. They call looking for the last gate company they’ll ever need, and that’s the job we’re built for.

Our the Gate Access Control crew carries real local knowledge. We know that the neighborhoods along Glenview Drive see more frost heave than the higher ground near the Richland Hills Country Club area. We know the older homes off Handley Drive often have shallow gate post footings poured in the 1970s and 1980s, before anyone in Tarrant County was digging deep enough for shifting clay. That kind of specific experience means we show up already knowing what we’re likely to find. You’re not paying us to learn on your driveway.

Every technician who comes to a Ric​​hland Hills home is background-checked, uniformed, and trained to work in someone’s yard the way they’d work in their own mother’s. We carry parts for the brands most common in this area, which means fewer return trips and less waiting. And if anything isn’t right after we finish, the 90-Day Done Right Promise is a written guarantee. No paperwork, no arguing, no exceptions. We come back and make it right.

Our Gate Access Control Services in Richland Hills

Access control is what lets the right people in and keeps everyone else out without a hand ever touching the gate. In Richland Hills, the most common setups are on driveway swing gates and slide gates serving single-family homes, plus a number of rental properties and a few small private lanes. Here’s what we install, service, and repair in this area.

Keypad Entry

A keypad mounted at the driveway is the workhorse of Richland Hills gate access. We install wired and wireless keypads, weather-sealed for the ice storms and summer heat we get, and program them so each user gets their own code. For homes with frequent deliveries, caregivers, or visiting family, we set up temporary codes that expire. A basic single-family keypad retrofit in Richland Hills runs $450 to $900 with installation.

Keypad Entry

Remote Control

Remotes aren’t just about convenience; they need to be integrated so the gate opens smoothly without tripping the safety sensors. We program and replace remotes across all the major brands, including LiftMaster, DoorKing, Viking, and Ghost Controls. If you’ve got a remote that only works when you’re ten feet away, the problem is often the antenna placement on your receiver, not the battery. We re-aim antennas, upgrade receivers, and get the range back.

Remote Control

Phone Entry

Phone entry systems let a visitor push one button at the gate and ring a cell phone or landline inside the house. In Richland Hills, we install these on gates that sit far from the house, where a wired intercom isn’t practical. The visitor calls, you answer, you press a button on your phone to open the gate. For a typical Richland Hills single-family home, a phone entry system with installation runs $750 to $1,400 depending on the system’s range and features.

Phone Entry

Card Reader

Card readers are common on Richland Hills rental properties and shared driveways. A tenant or resident taps a card or fob at the reader, the gate opens, and there’s no code to remember or remote to lose. We install and maintain card reader systems for small private lanes and multi-home properties, including systems that log every entry so a landlord can see exactly who came through and when.

Card Reader
Need help today?Fast, friendly service and a no-obligation free estimate.

Call (817) 562-7979

What happens when you call

  1. 1
    A real person answersNo phone trees - you reach a local pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched.
  3. 3
    A background-checked tech heads outLicensed & insured, dispatched right away.
  4. 4
    You approve before work beginsNothing starts until you say go.

Trusted Brands We Service in Richland Hills

We’re certified on nine gate-automation brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In Richland Hills, we see a lot of LiftMaster and Ghost Controls on residential swing gates, and DoorKing and Viking on the slide gates that serve the larger lots off Baker Boulevard. Because we work with these systems daily, we stock the boards, remotes, and safety parts our Richland Hills customers need most. That means when your Viking operator throws an error code, we’re not ordering a part and making you wait a week. Most jobs are done in one visit.

Common Gate Access Control Problems We See in Richland Hills Homes

  • Clay soil heaves gate posts and throws the gate out of plumb. In places like the neighborhoods off Rufe Snow Drive, we see swing gates bind mid-travel because the hinge post has shifted a half inch or more. The operator’s force sensing then trips, and the keypad entry won’t complete a cycle. The fix isn’t a new keypad; it’s resetting the post and re-hanging the gate.
  • Loop detectors that aren’t sealed against moisture fail in low-lying yards. Richland Hills gets heavy rain in spring, and low areas hold water longer than the ground up the hill. A loop detector that’s not properly potted and sealed will fail, and the gate won’t open automatically when a car pulls up. We rewire and seal these, and we test them before we leave.
  • Solar gate openers sized for summer die in the winter months. Richland Hills gets dense cloud cover in winter and the occasional ice storm. A solar panel that barely kept the batteries topped up in August will let the battery drain in January, killing the phone entry and card reader until the sun returns. We size solar arrays for the worst month, not the average month.
  • Keypads mounted in direct sun crack and fail early. The Texas sun is hard on plastics. We see keypads in Richland Hills with cracked housings and worn buttons from UV exposure. We install metal-housing keypads and position them where they won’t bake all afternoon.

Pricing for Gate Access Control in Richland Hills, TX

Here are the ranges we quote in Richland Hills, based on what we’ve installed in this market:

  • Keypad entry system: $450 to $900 installed, depending on wired vs. wireless and single vs. multi-user programming.
  • Remote control replacement and programming: $75 to $250 per remote, depending on brand and rolling-code setup.
  • Phone entry system: $750 to $1,400 installed, depending on range and cellular vs. landline integration.
  • Card reader system: $600 to $1,800 installed, depending on number of zones and logging requirements.
  • Video intercom and smart access: $1,800 to $2,800 installed, including camera, interior monitor or app integration, and wiring.

In the Richland Hills neighborhoods near the Trinity Railway Express tracks, our crew reset a sagging tube-steel swing gate at a rental property after the hinge post leaned a full 3 inches off vertical. We pulled the old footing, poured a new 30-inch post footing with a rebar cage, then re-hung the gate and recalibrated the LiftMaster LA400 operator’s obstruction sensing so the keypad entry and safety photocell worked on the first try. That’s the difference between patching a symptom and fixing the ground problem.

Every quote is written and agreed before we turn a bolt. You’ll never get a call from us saying the job ran over and we need more money. For an exact quote on your Richland Hills gate access control project, call (817) 562-7979. Estimates are free.

We Also Serve Cities Near Richland Hills

Beyond Richland Hills, our crews work throughout the surrounding Tarrant County communities. That includes Fort Worth, Aledo, Azle, and Benbrook. If you live closer to one of those cities or own property there, the same Gate Access Control in Richland Hills team handles those calls, with the same written quotes and the same 90-Day Done Right Promise.

Serving Richland Hills, TX - Our Local Coverage Area

We’re based in the Richland Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.

FAQs - Gate Access Control in Richland Hills

Why Richland Hills Chooses Ironworks Gate Co.

We set the standard for gate access control in Richland Hills.

30-60 Min Response

Fast dispatch across Richland Hills. Same-day and emergency service available 24/7.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Richland Hills

Getting your gate access control handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your gate access control needs and we provide an upfront, transparent quote - no obligation, no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Richland Hills - typically within 30-60 minutes, with parts stocked on the truck.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and 100% satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees - talk to a local gate access control pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Richland Hills Customers Say

Trusted by homeowners across Richland Hills and surrounding areas.

★★★★★

"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and put a surge protector on the line so hopefully it does not happen again."

Layla Haddad · Verified customer
★★★★★

"Used them at two properties now. Both times they diagnosed it on the first visit instead of guessing and coming back."

Rohan Shah · Verified customer
★★★★★

"The repair is holding. He was quite a bit later than the window I was given and the office did not call me about it, I had to call them. The work itself was done well once he arrived."

Ruben Morales · Verified customer

Ready for Gate Access Control in Richland Hills?

Call now for a free estimate - or request one below. Licensed, insured, and available 24/7 in Richland Hills.

(817) 562-7979

Request a Free Estimate in Richland Hills

Tell us about your gate access control needs - we'll respond within the hour.

By providing your information above, you agree to the terms of our Privacy Policy and agree that you may be contacted by telephone, text message, or email about your request, including by the independent professionals who may fulfill it.

Prefer to text? Send a Text
Local Service Coverage
Call Now - 24/7 Dispatch