Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Richland Hills
Most gate repairs in Richland Hills run between $195 and $680, with hinge and post work at the lower end and full operator replacement at the upper end. We complete most single-visit repairs the same day we arrive, and every price is quoted and agreed before we turn a single bolt. If your gate is sagging, grinding, or refusing to open on Glenview Drive, Baker Boulevard, or any street in between, call Ironworks Gate Co. at (817) 562-7979 and a live person will answer, day or night.
We know Richland Hills gates the way only a company that has worked this soil and these driveways can. The clay underneath this city moves with every wet-dry cycle, and that movement shows up in hinge posts, operator mounts, and safety photocells long before most homeowners notice anything wrong. Our Gate Repair crews carry the parts for the brands this city’s homes were built with, and we will tell you straight if a repair is worth doing or if replacement is the honest call.
Why Ironworks Gate Co. Is Richland Hills’s Preferred Gate Repair Company
Richland Hills homeowners tend to stay put. They have been in their homes twenty, thirty, forty years, and they remember exactly who showed up on time and who never called back. That memory works in our favor, because since 1984 we have built our name one job at a time, the same way Richland Hills was built one street at a time. Dispatch and scheduling for our local crews is coordinated from the company’s Dallas-Fort Worth office, but the technicians who knock on your door know Richland Hills driveways, not just gate parts.
Every completed job carries the 90-Day Done Right Promise in writing. No paperwork to file, no phone calls to chase. If it is not right, we come back and make it right. That promise is the Keystone Standard, and it applies to a $89 seasonal tune-up the same as a full operator replacement. Homeowners in Richland Hills also know our technicians are background-checked and uniformed, working on their property the way they would work on their own mother’s. Victor Salinas, who leads our crews, has built the company’s reputation on that single idea: treat every gate like it guards the house you grew up in.
Our Gate Repair Services in Richland Hills
Hinge & Post Repair
Richland Hills clay soil expands when wet and contracts when dry, and over decades that cycle works hinge posts loose in their footings. We see it on nearly every street here, from the older homes near Richland Hills High School to the newer builds west of TX-183. A sagging gate that drags on the driveway is rarely a hinge problem alone. We dig out the footing, re-set the post in concrete with proper drainage, and then re-hang the gate so it closes like the day it was installed. Typical hinge and post repair in Richland Hills runs $225 to $475 per post, depending on footing depth and gate weight.
Gate Realignment
When your gate latch no longer lines up with the post, or the gate swings open with a scrape, we realign the frame, adjust the hinge tension, and set the latch depth correctly. In Richland Hills, realignment often follows post movement from clay expansion, and doing it right means addressing the post before adjusting the panel. A straightforward realignment runs $150 to $350. If the post has shifted, that is a separate repair and we will show you the problem before we quote it.
Electric Gate Repair
Electric gate openers in Richland Hills fail for a handful of predictable reasons: a loop detector nicked during driveway resurfacing, a control board cooked by a power surge, or a gear stripped from years of use without lubrication. We trained on nine opener brands, including LiftMaster, Viking, and Ghost Controls, so the repair is correct on the first visit. Electric gate repair in Richland Hills typically ranges $280 to $680, parts included, with the price agreed before work begins.
Automatic Gate Repair
Automatic gates add complexity: safety photocells, loop detectors, edge sensors, and the operator itself all have to work together. When one component drifts, the whole system acts up. Most Richland Hills automatic gate repairs take a single visit. We carry the common sensors, boards, and remotes on the truck, so you are not waiting on a second trip for parts. Expect $220 to $580 for most automatic gate repairs in this market.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Richland Hills
Your gate opener should not dictate who can fix it. We service and stock parts for DoorKing, Elite, Viking, and the other leading brands, which means a Richland Hills homeowner with a twenty-year-old DoorKing swing operator gets the same first-visit fix as someone with a new smart-enabled unit. Brand familiarity matters most when the trouble is intermittent: a board that fails only when it rains or a receiver that drops signal after dark. We have seen those patterns before, so we do not waste your time replacing parts that are fine.
Common Gate Repair Problems We See in Richland Hills Homes
- Sagging swing gates from clay soil movement. The blackland clay under Richland Hills expands and contracts with rainfall, and over time that movement loosens hinge posts in their concrete footings. The gate sags, drags, and eventually the latch stops catching. Panel adjustment alone will not fix it; the post has to be re-set.
- Loop detectors sliced during driveway work. Driveway resurfacing is common across Richland Hills, and it is hard on the induction loop wires buried under the concrete or asphalt. A nicked loop wire causes the gate to open for every car but yours, or to refuse to close after you pass. We pull a new loop and re-terminate it at the operator.
- Safety photocells knocked out of alignment. Richland Hills summer heat and ground shift push photocells out of line, especially on gates that face west into the afternoon sun. The gate reverses for no visible reason, or refuses to close at all. A quick re-alignment usually fixes it, but only if the post beneath the cell has not moved.
- Slide gate gear and rack wear on long driveways. TX-183 splits this city, and many Richland Hills properties sit on long driveway runs where slide gates make more sense than swing gates. Rack-and-pinion systems work hard on those runs. We replace worn rack sections and re-grease the drive gear so the gate does not grind halfway and stall.
Pricing for Gate Repair in Richland Hills, TX
Here are the numbers we quote in Richland Hills, with the understanding that every gate is different and the final quote is always agreed before work starts. Hinge and post repair: $225 to $475 per post. Gate realignment: $150 to $350. Electric gate repair: $280 to $680. Automatic gate repair: $220 to $580. Full operator replacement on a swing or slide gate: $900 to $2,400 depending on gate weight and opener model. We also offer an $89 Seasonal Tune-Up, a $50 discount on any repair over $250, and a permanent 5% discount for seniors and veterans. Free estimates on every job, and a free second opinion on any written estimate from another company. Call (817) 562-7979 and we will give you a real number, not a range with a wink.
We Also Serve Cities Near Richland Hills
Ironworks Gate Co. works throughout the mid-cities and west side of the metro. If you are in Fort Worth, Aledo, Azle, or Benbrook, our crews are already in those neighborhoods regularly and can usually reach you within a day. See our Gate Repair in Richland Hills page for what we cover locally, or call (817) 562-7979 and tell us where you are.
Serving Richland Hills, TX - Our Local Coverage Area
We’re based in the Richland Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Richland Hills
Because the problem is almost never the hinges. Richland Hills sits on expansive clay soil that heaves with every rain and drought cycle, and that heave loosens the hinge post in its concrete footing. You can tighten and adjust the hinge hardware all afternoon, but the post underneath is still moving. We fix it by excavating the old footing, re-setting the post in properly drained concrete, and only then re-hanging and adjusting the gate. That is a $225 to $475 repair per post in Richland Hills. Call (817) 562-7979 and we will look at the post before we quote anything.
A loop detector is a buried wire loop under your driveway that senses the metal of a vehicle and tells the gate opener to open or hold. When that loop wire gets nicked during driveway resurfacing or concrete patching, it reads false occupancy and the gate behaves erratically: opening for some cars, ignoring yours, or refusing to close. In Richland Hills, where driveway repair is constant, this is one of the most common automatic gate failures we see. We pull a new loop and re-terminate it at the operator, typically for $300 to $550. Call (817) 562-7979 if your gate has started acting like it has a mind of its own.
Yes, every automatic gate in Richland Hills should have functioning safety photocells and a properly adjusted reverse mechanism. The photocells are the small sensors mounted low on each side of the gate opening; they stop and reverse the gate if a person, pet, or car is in the path. Richland Hills summer ground shift and west-facing afternoon sun knock them out of alignment regularly, which causes nuisance reversals. Test yours by blocking the beam with your hand while the gate is closing; it should stop and reverse immediately. If it does not, call (817) 562-7979 and we will re-align or replace them, usually in one visit.
Yes, we service solar gate openers on the larger lots and rural-adjacent properties around Richland Hills that do not have convenient grid power at the gate. The usual trouble is a solar panel that has lost output due to shade or panel age, or a battery bank that no longer holds a charge. We test the panel output, load-test the batteries, and replace the failed component rather than the whole system. Solar opener repair in Richland Hills typically runs $250 to $650. Call (817) 562-7979 and tell us what the gate is doing, or not doing.
That grinding usually means the rack gear has worn teeth or the drive gear on the operator has stripped, and the motor is fighting a bind instead of gliding the gate along the rail. On the long driveway runs that TX-183 splits through this part of Richland Hills, slide gates work hard and rack sections wear out. The fix is replacing the damaged rack section and re-greasing the drive gear, typically $280 to $740 depending on how much rack has failed. Ignoring the grind will kill the operator entirely, which costs far more. Call (817) 562-7979 for an exact quote, and we will show you the worn teeth before we replace anything.
Call Ironworks Gate Co. for Gate Repair in Richland Hills
When your gate stops working in Richland Hills, it throws off your whole day and leaves your property unsecured. We answer the phone 24 hours a day, seven days a week, with a live person, not a voicemail tree. We tell you the price before we start, and we put the 90-Day Done Right Promise in writing on every job. If you want a square deal from a company that stands behind its work, call (817) 562-7979 now and talk to a gate technician who knows Richland Hills driveways. Free estimates, no pressure, and done right the first time.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Richland Hills and the surrounding communities with craftsmanship and straight answers since 1984.