Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Richland Hills
Gate parts and welding in Richland Hills usually comes down to one of three problems: a hinge post that has shifted, a rail or hinge that has cracked, or a roller that has worn out. Most of those jobs run $180 to $650, and we can typically reach homes across Richland Hills within the same day you call. Our Gate Parts & Welding team carries the steel, welding rigs, and replacement hardware needed to get your gate closing properly again, whether you’re near the Richland Hills Public Library, off Baker Boulevard, or in a neighborhood along Rufe Snow Drive. Call (817) 562-7979 and Victor Salinas will make sure the right technician gets dispatched to your driveway.
Why Ironworks Gate Co. Is Richland Hills’s Preferred Gate Parts & Welding Company
We have spent years working on gates in Richland Hills, and we know what fails here: hinge posts that rotate in expansive clay, rails that crack at the weld points after decades of use, and rollers that seize up after Tarrant County’s freeze-thaw cycles. Homeowners in Richland Hills keep our number because we fix the underlying problem instead of just patching the visible one. A welded repair that ignores a shifted post will fail again within a season. We catch that the first time.
Our technicians are background-checked and uniformed. They work on your driveway the way they would work at their own mother’s house. We quote the price before any work starts, and every job carries our written 90-Day Done Right Promise. If it is not right, we come back and make it right. No paperwork, no arguing. That is the standard Victor Salinas has held this company to for over 42 years.
Our Gate Parts & Welding Services in Richland Hills
Hinge Replacement
Hinge replacement in Richland Hills is often the difference between a gate that opens smoothly and one that drags on the concrete by August. Most driveway gates in this area are steel or wrought iron hung on two or three barrel hinges welded to a post. When those hinge welds crack or the hinge pins wallow out, the gate sags, and every cycle grinds metal against metal. We cut off the old hinges, weld new ones at the correct height, and re-hang the gate so it swings true. Typical hinge replacement for residential gates in Richland Hills runs $180 to $400 depending on gate weight and hinge count.
Post Replacement
Post replacement is where Richland Hills soil makes its presence known. The clay here swells when wet and shrinks when dry, and over twenty or thirty years that movement slowly walks a hinge post out of plumb. The gate starts scraping, the opener trips its overload, and no amount of reprogramming fixes it. We dig out the old post, set a new one in a deeper footing, and weld everything back square. A typical post replacement with new concrete in Richland Hills runs $350 to $800 depending on post size, depth, and whether we are resetting one post or both.
Rail Repair
Rail repair matters for any metal gate in Richland Hills, whether it is a swing gate with a cracked top rail or a slide gate with a rack that has pulled away from the beam. Cracks usually start at a weld, then propagate through the tube. We grind out the crack, weld it solid, and often fish-plate the section with a steel gusset so it does not crack again in the same spot. For slide gates, misaligned rack welds are a chronic issue, and we re-weld or shim the rack so the drive sprocket engages cleanly. Rail repair work typically runs $150 to $450 in Richland Hills depending on access and crack length.
Custom Welding
When a gate is too damaged for a spot repair, or when a homeowner wants reinforcement added rather than replacing the whole structure, custom welding is the answer. We fabricate replacement sections, add steel bracing to sagging frames, and build new hinge brackets that match the original geometry. Our welding work in Richland Hills is done on site with mobile equipment, so we do not have to haul your gate to a shop unless the damage is severe. Custom fabrication and welding jobs in Richland Hills typically run $250 to $900, and we price each one in writing before striking an arc.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Richland Hills
Many Richland Hills gates are automated, and the opener brand matters when we are diagnosing why a gate will not close. Our technicians carry parts and service training for DoorKing, Elite, Ghost Controls, and Mighty Mule systems, along with five other major opener brands. If your gate has physical damage plus an opener that is fighting itself, we check both in the same visit. That way you are not left with a fresh weld on a gate that still will not move because the opener limits were never reset.
Common Gate Parts & Welding Problems We See in Richland Hills Homes
- Hinge posts rotating in expansive clay. Richland Hills sits on clay that moves with every wet-dry cycle. Posts lean, gates drag, and operators overheat. The fix is a new post footing, not a limit-switch adjustment.
- Slide gates losing rack alignment. Older slide gates around Richland Hills grind their rack teeth down over time. The gate jerks, stalls, or sounds like it is chewing metal. We re-weld or shim the rack and reset the drive tension.
- Cracked welds on steel tube frames. Twenty years of heat, cold, and hailstorms takes a toll. Welds crack, then the crack walks into the tube. We find these early when we are out for a tune-up and weld them before a rail lets go completely.
- Photocells knocked out of alignment by storms. Tarrant County hailstorms and temperature swings shift photo eyes just enough that an auto-close gate reverses for no visible reason. We re-align and test the entrapment circuit so the gate closes safely and reliably.
Pricing for Gate Parts & Welding in Richland Hills, TX
Here are the ranges we quote most often for Richland Hills homes. A hinge replacement on a standard steel driveway gate runs $180 to $400. Post replacement with new concrete runs $350 to $800. Rail repair and crack welding runs $150 to $450. Custom welding and fabrication starts around $250 and runs up to $900 for larger reinforcement jobs. What moves a job within those ranges is access, gate weight, and how much of the original structure is still sound enough to weld to. We quote every job in writing before any work begins, and we honor that number. If you have a written estimate from another company, we will give you a free second opinion. Call (817) 562-7979 and we will put honest numbers in front of you.
One local fact worth knowing: Richland Hills does not require a city permit or inspection for residential gate repairs. No one from the city will check our post footings or our welds. That means the quality of the work is entirely on us, so we self-police every post depth, every weld, and every safety photocell test as if an inspector were standing behind us. You should expect that standard from any contractor working on your gate in Richland Hills.
We Also Serve Cities Near Richland Hills
While this page is written for Richland Hills homeowners, our crews regularly handle Gate Parts & Welding in Richland Hills and the surrounding Tarrant County communities. We also serve Fort Worth, Aledo, Azle, and Benbrook with the same written pricing and 90-Day Done Right Promise. If you are in one of those cities and your gate is sagging, cracking, or refusing to close, call us at (817) 562-7979 for a free estimate.
Serving Richland Hills, TX - Our Local Coverage Area
We’re based in the Richland Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Richland Hills
If the gate sags visibly and scrapes the driveway, the question is whether the hinge itself is worn or the post has moved. In Richland Hills clay soil, it is usually the post. We check by measuring the post for plumb and the hinges for play. A worn hinge gets replaced for $180 to $400. A shifted post requires a new footing and runs $350 to $800. Call (817) 562-7979 and we will tell you which one you actually need, free.
Most cracked rails can be welded in place. We grind out the crack, weld the joint solid, and add a steel gusset when the crack runs through a load-bearing section. Removing the gate is only necessary when the rail is cracked near a hinge barrel or when we need to lay the gate flat for a full-length reinforcement. We will tell you before we start which approach your Richland Hills gate needs, and the price does not change after we start.
It is usually both, and in Richland Hills it is often the post. When a hinge post shifts in the clay, the gate starts binding, and the LiftMaster trips its obstruction detection and reverses. The opener is doing its job; the problem is a physical bind that only a welder can correct. We fix the post or hinge first, then reset the opener’s force and limit settings. That sequence keeps you from paying for electronics work that would not have fixed the real problem.
A proper slide gate repair includes checking the rack for wear and alignment, the rollers for flat spots, the guide wheels for play, and the opener’s force settings. In Richland Hills, we see a lot of racks that have pulled away from the beam after years of temperature swings. We re-weld or shim the rack, replace worn rollers, and test the full travel cycle including the safety reversal. If the job does not include that last step, it is not finished. Call (817) 562-7979 for a slide gate check that covers the whole drivetrain.
No. Richland Hills does not require a city permit or inspection for residential gate post replacement or welding. The only standards that apply are the state-adopted electrical code for opener circuits and UL 325 entrapment protection. That means the quality of the footing and the weld is between you and your contractor. We document our post depths and test every safety circuit as if an inspector were checking the work. Call (817) 562-7979 and we will walk you through exactly what we do, step by step.
We worked on a Richland Hills driveway gate on a street near the Richland Hills Public Library where the client had a LiftMaster LA400 swing gate operator intermittently failing to close. The hinge post had rotated enough that the swing gate was dragging on the driveway, so we replaced the hinge post with a deeper post footing, welded a new hinge bracket at the original height, adjusted the operator’s close limit and force settings, and verified the existing safety photocell still reversed the gate within two seconds of an obstruction. That is the sequence that gets a Richland Hills gate closing reliably without repeat failures.
If your gate is sagging, scraping, cracking, or refusing to move, call us at (817) 562-7979. We will give you a free estimate with honest numbers, we will tell you what actually needs fixing, and we will do the work right. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Richland Hills and the greater Tarrant County area since 1984.