Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Aledo
Gate parts and welding in Aledo means dealing with the two forces that define this part of Parker County: expansive black clay soil and serious summer heat. A gate that worked flawlessly in March drags on the caliche by August because the posts underneath it have moved. Ironworks Gate Co. handles hinge replacement, post resetting, rail repair, and custom welding for homeowners across Aledo, from Morningstar to the ranch properties along Farm-to-Market roads. If your gate is binding, sagging, or the opener is fighting the frame, call us at (817) 562-7979 and we’ll get a technician to you fast.
Why Ironworks Gate Co. Is Aledo’s Preferred Gate Parts & Welding Company
Most gate companies in the DFW metro see Aledo as a long drive. We see it as the neighborhood we’ve been welding in for decades. The property layouts are different out here: long driveways, wide entrances, solar-powered openers where running mains power would cost more than the gate itself. Our techs know the Morningstar subdivisions, the acreage off Old Weatherford Road, and the ranch entrances east of town toward the Tarrant County line. When a post heaves out of plumb or a weld cracks on a 16-foot ornamental steel gate, we know what we’re walking into before the truck pulls up.
Owned by Victor Salinas, Ironworks Gate Co. has been doing this work right for over 42 years. Every job gets the 90-Day Done Right Promise in writing. If it’s not right, we come back and make it right. No arguing, no paperwork, no exceptions. That’s the deal on a $200 hinge repair or a full custom gate build.
You call, a live person answers. Not a voicemail tree, not a callback queue. That matters when your gate is stuck open and the horses are eyeballing the county road. Our background-checked, uniformed technicians work in your home the way they’d work in their own mother’s. And every completed job is backed by the Keystone Standard, our written 90-day guarantee.
Our Gate Parts & Welding Services in Aledo
We stock or fabricate what your gate needs, and we weld on-site so you’re not waiting on a shop lead time. Here’s what most Aledo calls come down to:
Hinge Replacement
On a heavy Aledo swing gate, a hinge is the pivot point that carries hundreds of pounds every time the opener cycles. When a hinge wears or its weld cracks, the gate drops. You’ll see the latch miss the post or the bottom rail scrape the driveway. We cut out the old hinge, weld in a new heavy-duty replacement rated for the gate’s weight, and often add a sag-correction plate so the geometry stays right. Most hinge replacements in Aledo run $180-$340 per hinge, installed on-site.
Post Replacement
This is the big one in Aledo, and it comes back to the clay. Parker County’s expansive soils swell when wet and shrink when dry. A gate post set 3 feet deep in that soil can move several inches a season. We dig out the old post and footing, set a new post deeper and with a wider concrete pier, then brace it plumb while the concrete cures. Post replacement in Aledo typically runs $450-$950 per post, depending on gate weight and whether we’re re-hanging the gate the same day or coming back once the concrete has set.
Rail Repair
Slide gates take a beating on gravel and caliche driveways. The bottom rail picks up rock strikes, rust, and fatigue cracks from years of roller contact. We weld reinforcement plates over cracked sections, straighten bent rail runs, or replace the entire bottom rail with new steel. On heavily used ranch gates, we’ll recommend heavier-gauge rail than what the original installer used. Rail repair in Aledo runs $220-$600 depending on the extent of the damage and how much rail needs replacing.
Custom Welding
Sometimes the gate needs something that was never in the original design: a livestock panel extension so the dog stays home, a steel mesh inlay for child safety, a weldon plate for a new opener arm, or a reinforcement gusset where the manufacturer’s design was just too light. We weld custom steel work on-site and match the gate’s existing finish as closely as practical. Custom welding projects in Aledo run from $150 for a small bracket to $2,000+ for significant structural modifications. We quote the price before striking the first arc.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Aledo
We’re trained and equipped on nine gate-automation brands, and the ones we see most often on Aledo acreage are Linear, Viking, and DoorKing. That coverage means the fix is correct on the first visit, whether the problem is in the weld or in the motor. If your opener is fighting a gate that’s out of plumb, we fix the gate first, then dial in the opener so it’s not faulting on the safety edge. Our Gate Parts & Welding team keeps common replacement parts on the truck so most jobs finish in a single visit.
Common Gate Parts & Welding Problems We See in Aledo Homes
- Post heave from black clay soil. The clay swells in wet winters and shrinks in summer heat. Posts canted two or three inches out of plumb are routine in Aledo, and the fix is a proper post reset, not shimming the hinges and hoping.
- Solar opener brownout in summer. On a multi-acre lot where running AC power to the gate costs thousands, solar is the go-to. But 100°F+ days degrade circuit boards and voltage regulators. A system that worked in April can be dead by mid-July if the panel was undersized.
- Ice-storm shear on slide gates. The February 2021 ice storm bent swing gate arms and sheared rack-and-pinion mounting brackets across Aledo. Water gets into the rack channel, freezes, and the motor keeps driving against a gate that’s locked in ice. We replace the rack, reinforce the brackets, and re-time the opener travel.
- Bottom-rail drag from gate sag. When hinges stretch or posts lean, the latch side of a swing gate drops. On caliche driveways, that dropped rail grinds stone and eventually digs a groove. By the time you hear it, the hinge welds have usually started to crack.
Pricing for Gate Parts & Welding in Aledo, TX
We quote every job before work starts, so there’s no surprise on the invoice. Here’s the honest picture for Aledo:
- Hinge replacement: $180-$340 per hinge
- Post replacement (includes concrete and re-hanging): $450-$950 per post
- Rail repair or replacement: $220-$600
- Small custom welding: $150-$500
- Structural gate modification: $500-$2,000+
What moves the price is gate weight, steel gauge, and how deep we need to excavate around a heaved post in that Parker County clay. Free estimates are the rule, not the exception. Senior and veteran customers get 5% off, always. If you have a written estimate from another shop, we’ll give you a free second opinion on it, because sometimes the lower quote is lower for a reason.
We Also Serve Cities Near Aledo
If you’re off Highway 730 in Azle, on the west side of Fort Worth, near Haltom City, or out toward Kennedale, we make the drive. Ironworks Gate Co. serves Aledo and the surrounding communities with the same written guarantee and the same live-answer phone line.
Serving Aledo, TX - Our Local Coverage Area
We’re based in the Aledo area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Aledo
Because the black clay soil under your gate posts expanded during wet spring weather and shrank during the summer bake, moving the post out of plumb. The gate didn’t change, the ground did. The fix is a post reset and re-leveling, which we quote as a routine line item in Aledo, not a rare repair. Call (817) 562-7979 for a free look at the post footings.
We weld on-site in Aledo, almost always. The truck carries a welder and the steel we need to splice or replace a section of rack. Unless the gate itself needs to come off its track for major structural work, you’re back in business the same day. Estimates are free, so call and we’ll tell you straight what it’ll take.
For a typical heavy swing gate on an Aledo acreage property, you want at least a 30-watt panel with a 12-volt deep-cycle battery, and closer to 50 watts if the gate cycles more than a dozen times a day. The 100°F+ heat here shortens battery life and stresses the charge controller, so we size the system for summer, not for the mild week it’s being installed in. We can spec and install the right setup when we’re out for the welding work.
For most Aledo residential gates, a safety photocell across the opening is sufficient and is what we install most often. A loop detector is worth adding if you’re ever going to want auto-close after a vehicle leaves, or if kids, dogs, or livestock might wander under a closing gate. On ranch properties with horses, we lean toward the loop detector. Call us for a straight recommendation based on your gate and your animals.
On a properly hung gate with good hinges, you shouldn’t need hinge welding more than once every 10-15 years. The gates that need it every couple of years are the ones where the posts have moved and the hinges are carrying stress they were never meant to take. When we reset the post and re-hang the gate with proper clearance, the hinge welds stop failing. That’s the difference between patching the symptom and fixing the cause.
Call Ironworks Gate Co. for Gate Parts & Welding in Aledo
When your gate is down, you want a company that knows what Aledo clay does to a post and what Parker County summer does to a solar controller. We’ve been at this over 42 years, and we back every weld and every parts replacement with the 90-Day Done Right Promise. Free estimates, upfront pricing agreed before any work starts, and a live person on the phone 24 hours a day. Call (817) 562-7979 now for service in Aledo.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Aledo and the surrounding Parker County area.