Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Haltom City
Gate parts and welding in Haltom City means dealing with two very different animals on the same block: 1960s chain-link swing gates on residential lots and heavyweight commercial slide gates on salvage-yard perimeters. We work on both, usually in the same day. If your hinge post is leaning or your gate is dragging across the concrete, call (817) 562-7979. A live person answers, not a voicemail tree, and we’ll have a background-checked, uniformed technician out to your place in Haltom City on a schedule that works for you.
We’re the Gate Parts & Welding team at Ironworks Gate Co., and we’ve spent years learning what Haltom City gates actually do when the Blackland clay starts moving. That local knowledge means we don’t guess. We know which post footings heave first, which rollers last on commercial track, and which hinge rebuilds hold up on a shared driveway two neighbors use every day.
Why Ironworks Gate Co. Is Haltom City’s Preferred Gate Parts & Welding Company
Haltom City homeowners call us because the job gets done without surprises. The price is quoted and agreed before a single bolt is turned. Every technician is background-checked and uniformed, and each follows our K.E.Y.S. values code: Krafted right, Every time, Your home first, Standing behind it. The 400th job gets the same care as the first.
Our Haltom City customers also know about the 90-Day Done Right Promise. That’s a written guarantee on every job. If the gate isn’t right, we come back and make it right. No paperwork gymnastics, no arguing, no exceptions. We call it the Keystone Standard internally, but it’s the same thing our customers call “why I don’t call anyone else.”
Victor Salinas, who leads Ironworks Gate Co., built the company on a simple premise: do the work once, do it correctly, and stand behind it in writing. That’s why we don’t rush a post replacement or cut corners on a weld. A gate in Haltom City has to survive clay heave, hard freezes, and daily use from cars, kids, and the occasional delivery truck that clips the post.
One more thing worth knowing: when you call (817) 562-7979, a real person picks up. Twenty-four hours a day, seven days a week. If your gate is stuck open at 2 a.m. and you need help, you’ll talk to someone who can actually do something about it.
Our Gate Parts & Welding Services in Haltom City
Hinge Replacement
Most residential gates in Haltom City are original to the home, which means the hinge hardware has been holding steel or wood since the Kennedy administration. When Blackland clay shifts and the post tilts, hinges bind, pins bend, and the gate starts dragging. We replace hinges with heavier-gauge steel or stainless components sized for the gate’s actual weight, not the weight someone guessed at forty years ago. On gates off streets like Walthall or Hightower, we often replace worn barrel hinges with adjustable weld-on hinges so future sag can be corrected without tearing the whole frame apart.
Post Replacement
Blackland Prairie clay is the reason Haltom City gate posts lean. The soil swells when it’s wet and contracts in a drought, and a post set in a shallow footing gets worked loose over the years. We pull the old post, dig a deeper footing, and set new galvanized steel in a concrete collar sized for the gate’s swing arc and weight. If the gate is heavy or sees commercial use, we’ll recommend a larger post diameter. A 2 3/8-inch residential post is not the right answer for a gate that takes daily hits from a flatbed.
Rail Repair
Chain-link gates in Haltom City’s older neighborhoods often need rail-end rebuilds. The top rail stretches, the bottom rail drags, and the tension wire gives up. We cut out the damaged section, weld in new rail with our MIG setup, and re-hang the fabric so the gate closes square. On wood-frame gates, we sister in angle iron along cracked rails, which buys a gate another decade or two instead of another summer.
Custom Welding
Some Haltom City jobs can’t be fixed with off-the-shelf parts. A gate on a shared driveway, a salvage-yard security gate, a custom width opening that no standard gate fits. That’s what welding is for. We fabricate and weld on-site or in-shop depending on the job, using the same care whether we’re repairing a 1962 swing gate or building a cantilever slide gate for a commercial lot off Denton Highway. If the metal is worth saving, we’ll tell you. If it’s not, we’ll show you why and quote a replacement before we touch anything.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Haltom City
We’re trained and equipped on nine gate-automation brands, and in Haltom City we most often see Linear, Ghost Controls, and DoorKing openers on residential gates, with Viking and DoorKing on commercial lots. Because we carry the programming gear and common hardware for all of them, the right fix happens on the first visit most of the time. We also keep a local stock of common parts in our service trucks, so a bad control board doesn’t mean two trips across the metroplex.
Common Gate Parts & Welding Problems We See in Haltom City Homes
- Hinge posts heaving out of plumb. The Blackland clay under Haltom City swells and contracts all year, and a 50-year-old post with a 12-inch footing will tilt. The gate sags, the latch misses, and one day the gate just won’t close at all. We replace the post and set the new one deep enough to resist the next drought cycle.
- Shared driveway gates that can’t stay aligned. When two homes share a gate, it gets twice the cycles and twice the abuse. The post takes hits from both directions, and the latch hardware wears out fast. We reinforce with heavier posts, better hinges, and bolt-through hardware that doesn’t wallow out the mounting holes.
- Commercial slide gates on light industrial lots. Haltom City has salvage yards, auction lots, and fabrication shops scattered through the residential grid. Their slide gates carry V-track rollers that flatten under daily truck traffic. We keep heavyweight replacement rollers and rebuild the track carriers with weld-on gussets, not the light-gauge brackets most residential suppliers stock.
- Freeze-cracked wood frames on older ranch gates. The February 2021 freeze popped open a lot of old wood gate frames across Haltom City. Where the wood is beyond repair, we weld steel angle or channel reinforcement into the existing frame, or we replace the frame section outright with steel. You keep the gate’s look, but it stops falling apart.
Pricing for Gate Parts & Welding in Haltom City, TX
Haltom City’s market runs a little different from the bigger suburbs because so many homes are older and the commercial-industrial mix means we price residential and heavy-duty work side by side. A typical hinge replacement on a residential chain-link gate in Haltom City runs $180 to $340 depending on gate weight and hinge type. A new galvanized post set in concrete typically runs $275 to $475 per post, with deeper footings and larger pipe adding cost. Rail-end rebuilds run $150 to $300. Custom welding and fabrication is quoted per job, but most residential weld repairs land between $250 and $650.
Commercial slide-gate roller replacement or track-carrier rebuilds off corridors like Pipeline Road or Denton Highway run higher because the hardware is heavier. Those jobs often start around $400 and go up based on gate length and weight rating. Every price is quoted and agreed before we start. Call (817) 562-7979 for a free estimate. We will be there when we say, and the number on the quote is the number on the invoice.
We Also Serve Cities Near Haltom City
Our gated service area extends beyond Haltom City into Fort Worth, North Richland Hills, Hurst, and Bedford. If your property is in one of those nearby cities, we’ll schedule the same way we do in Haltom City: a live person on the phone, a written price before work begins, and a 90-Day Done Right Promise when the job is complete. Call (817) 562-7979 and tell us what the gate is doing.
Serving Haltom City, TX - Our Local Coverage Area
We’re based in the Haltom City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Haltom City
The Blackland Prairie clay under Haltom City contracts during summer drought, which lets the hinge post lean out of plumb a little more each dry season. That makes the gate drag, the latch miss the strike plate, and the hinges bind. The permanent fix is a new post set in a deeper concrete footing with the gate re-hung on adjustable weld-on hinges. Call (817) 562-7979 and we’ll tell you exactly what your gate needs and what it will cost.
Yes. We work on cantilever and V-track slide gates across Haltom City’s light industrial lots off Denton Highway and Pipeline Road. We weld and reinforce track carriers, replace flattened rollers with commercial-weight versions, and build or repair the gate frame itself. Our trucks carry the heavier-gauge parts those jobs need, because a residential roller from a big-box supplier will not survive a month of daily truck traffic.
Yes. Shared driveway gates in Haltom City take double the cycles and hits from both directions, which is why we reinforce them differently. We set a larger post in a deeper footing, use bolt-through hinge hardware instead of lag screws, and often install a Ghost Controls or Linear opener with keypad entry so both homes can use the gate without a key fob. The job is quoted before we start, and the 90-Day Done Right Promise applies in writing.
We do. Our technicians are trained on nine gate-automation brands, including Viking, DoorKing, and Linear, and Haltom City’s commercial lots keep us busy. We diagnose and repair the operator, replace limit switches and control boards, and rebuild the gate hardware the opener has to move. That saves you from replacing an operator that was never the problem. Call (817) 562-7979 and we’ll get a technician out to your lot.
Yes, and in Haltom City that’s a common call after any hard freeze. We sister steel angle or channel into the existing wood frame with through-bolts and weld points, which locks the frame straight and stops the sag without tearing out the whole gate. If the wood is too far gone, we’ll tell you that straight and quote a steel frame replacement before any work begins.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Haltom City and northeast Tarrant County.