Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across North Richland Hills
When a driveway gate stops closing or a hinge post starts leaning, North Richland Hills homeowners need a welder who understands what’s under the ground here, not just the metal above it. Ironworks Gate Co. repairs and replaces gate parts across North Richland Hills, from the newer subdivisions off Rufe Snow Drive to the established streets near Green Valley Park. We stock common hinges, rollers, latches, and weld plate in our service vehicles, so most repairs are handled in one trip. The limestone shelf that runs beneath much of this city changes how posts must be set, and that’s exactly the kind of local knowledge that separates a repair that holds from one that fails again. Call (817) 562-7979 and a live person answers, day or night.
Why Ironworks Gate Co. Is North Richland Hills’s Preferred Gate Parts & Welding Company
We’ve been doing gate work for over 42 years, and we approach every North Richland Hills job the same way: set the price before we start, do the work correctly the first time, and back the result in writing. Our 90-Day Done Right Promise applies to every weld, hinge, roller, and post we install in this city. If something isn’t right, we come back and make it right. No paperwork, no arguing.
North Richland Hills callers reach a live person at (817) 562-7979, not a voicemail tree. Our technicians are background-checked, uniformed, and they work on your property the way they would work on their own mother’s. Victor Salinas leads the company with a simple standard: the 400th job gets the same care as the first. That standard shows up in the reviews our customers leave and in the way gates operate five years down the road.
Because dispatch is coordinated from our Dallas-Fort Worth office, we keep response times to North Richland Hills short. Our crews know the neighborhoods, the soil conditions, and the typical gate styles on homes along Davis Boulevard and throughout the 76180 and 76182 zip codes.
Our Gate Parts & Welding Services in North Richland Hills
Ironworks Gate Co. specializes in Gate Parts & Welding, with the full scope covered: hinges, posts, rails, custom fabrication, rollers, latches, and locks. Here’s how we handle the most common calls in North Richland Hills.
Hinge Replacement
Most wrought iron and steel gates in North Richland Hills hang on barrel hinges that wear unevenly over time. We remove the old hinge, grind the surface clean, and weld a new one in place. When we do a hinge replacement here, we often find the post itself has shifted in the limestone shelf, so we check post plumb before welding. That’s the difference between a hinge that lasts and one that binds again in a year.
Post Replacement
The single biggest gate failure we see in North Richland Hills is a hinge post rocking loose. The Eastern Cross Timbers formation puts a limestone shelf surprisingly close to the surface in many parts of the city. A post set in a shallow hole sits in clay that swells after rain, and the post starts to lean. We core-drill through the rock to set the footing deep enough to hold, then weld or bolt the gate back to a post that won’t move. This is the fix that actually stays fixed.
Rail Repair
Bent or cracked rails are common on heavier slide gates and double-drive gates across North Richland Hills. We straighten, reinforce, or section-replace the rail depending on the damage. Where the rail has been rubbing because a post shifted, we address the post as well. A welded rail patch on a moving gate is a temporary fix; correcting the alignment underneath it is the real repair.
Custom Welding
Not every gate repair fits a catalog part. We fabricate custom brackets, hinge plates, reinforcing gussets, and operator mounts right on site in North Richland Hills. If a gate builder used an odd spacing or a nonstandard post width, we measure and weld to match. We’ve built replacement gate sections, added steel mesh panels, and fabricated custom latch plates for gates throughout this city.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in North Richland Hills
Our technicians are trained and equipped on nine gate-automation brands, including Linear, Viking, Ghost Controls, and DoorKing. That matters because a welded hinge bracket on a Viking operator mount needs to match the original geometry, and a Ghost Controls opener needs specific clearance. We carry common mounting plates, brackets, and roller assemblies on our trucks serving North Richland Hills, which means fewer trips and a faster fix when your gate won’t close. Whether you have a LiftMaster operator or a DoorKing keypad, we arrive knowing what we’re looking at.
Common Gate Parts & Welding Problems We See in North Richland Hills Homes
- Hinge posts rocking loose in the shallow limestone. In the Smithfield area and other parts of North Richland Hills, the rock shelf sits close enough to the surface that original post holes were often dug shallow. After rain swells the clay above the rock, the post leans and the gate sags. A proper repair means core-drilling into the limestone and setting the post deeper than the original builder bothered to dig.
- Rack and pinion teeth stripping on slide gates. When a wheel post shifts from limestone shelf movement, the gate’s gear rack no longer lines up with the pinion on the opener. The motor grinds, the teeth strip, and a chain reaction follows. We correct the alignment and replace the rack section in the same visit.
- Safety photocell false trips on long driveways. Many North Richland Hills homes sit on lots with long, west-facing driveways. The afternoon sun angle hits the photocell eye directly, and the gate reverses for no visible reason. A simple welded hood or repositioned mount on the post fixes the false trip without replacing the sensor.
- Latch and lock misalignment after sag correction. Once a sagging gate is lifted and re-welded, the latch strike plate often no longer lines up. We weld a new strike plate or adjust the latch housing so the gate actually locks securely, rather than just looking closed.
Pricing for Gate Parts & Welding in North Richland Hills, TX
A typical hinge replacement on a residential gate in North Richland Hills runs $180 to $320, depending on hinge size and whether we’re welding on wrought iron or steel. Post replacement, including core-drilling through the limestone shelf when needed, generally runs $450 to $900 per post. Rail repair or reinforcement is usually $180 to $400. Custom welding for brackets, plates, or small fabrication jobs starts around $95 for a simple weld and runs up from there based on time and material. Latches and locks are typically $85 to $220 including the part. Every job gets a written, upfront price before we turn a single bolt. You’ll know the number before we start. Call (817) 562-7979 for a free estimate on your specific gate.
We Also Serve Cities Near North Richland Hills
While this page focuses on Gate Parts & Welding in North Richland Hills, our crews also cover Hurst, Bedford, Haltom City, and Keller. If you live in one of those neighboring cities, the same pricing, the same 90-Day Done Right Promise, and the same live-answer phone apply. We treat the whole northeast Tarrant County area as our backyard.
Serving North Richland Hills, TX - Our Local Coverage Area
We’re based in the North Richland Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in North Richland Hills
The limestone shelf under North Richland Hills sits close to the surface in many areas, which means a standard 24-inch post hole often hits rock before it reaches stable depth. Builders sometimes set posts in shallow holes, and the clay above the rock swell after rain, pushing the post out of plumb. We core-drill through the limestone to set the footing deep enough to resist that movement, then weld or bolt the gate back to a post that won’t shift. Call (817) 562-7979 for a post inspection and an exact quote.
Yes, in most cases. If the post itself is still solid and plumb, we can replace the rollers and realign the gate in a single visit. But if the post has shifted in the limestone, new rollers will just wear unevenly again. We’ll tell you honestly which situation you have before we quote the work. Call (817) 562-7979 and we’ll walk you through what we’re seeing.
We do. When we’re already welding on a gate for a hinge replacement in North Richland Hills, we check the photocell mounts and weld a hood or reposition the mount if the afternoon sun angle is causing false trips. It’s a small addition that prevents the gate from reversing open for no visible reason. We’ll quote it before adding anything to the job.
In North Richland Hills, the clay soil swells after heavy rain when it sits over the limestone shelf, and that movement can shift the loop detector wiring or the gate’s position relative to the loop. The operator loses the signal and either won’t open or won’t close. We trace the loop circuit, check the connection at the operator board, and correct any ground movement affecting the gate alignment. Call (817) 562-7979 to schedule a diagnostic visit.
Yes, we can usually handle both in a single visit to a North Richland Hills home. We’ll weld the new hinge plates, mount the solar opener and panel, and set the travel limits and safety edges the same day. The solar panel placement depends on your gate’s orientation and shade, and we’ll mount it to maximize charge through the year. We’ll give you a written price for the full scope before we start.
Call Ironworks Gate Co. for Gate Parts & Welding in North Richland Hills
If your gate is sagging, dragging, or not closing right in North Richland Hills, we’re the company that fixes it and stands behind the work in writing. A live person answers at (817) 562-7979, 24 hours a day, 7 days a week. We’ll give you a free estimate, a straight answer, and a 90-Day Done Right Promise on the work we do. Whether you need a hinge replaced, a post core-drilled into the limestone, or a custom weld on an older gate, call us today.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving North Richland Hills with Gate Parts & Welding since 1984.