Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Benbrook
Gate parts and welding in Benbrook usually means one of three things: a hinge that gave out after years of soil movement, a post that heaved out of plumb, or a weld that cracked under wind load. Most repairs run between $180 and $520 depending on what’s failed, and we complete the majority in a single visit. Ironworks Gate Co. has been fixing gates across Tarrant County for over 42 years, and we know exactly what Benbrook’s caliche-and-clay soil does to a gate post. Call (817) 562-7979 for a straight answer and a free estimate.
Why Ironworks Gate Co. Is Benbrook’s Preferred Gate Parts & Welding Company
Benbrook homeowners don’t have time for a contractor who guesses. The soil here is different from Fort Worth proper, and a gate hinge that works fine in the flatter clay south of town behaves differently when it’s anchored in caliche caprock with expansive clay underneath. Our technicians have pulled augers out of Benbrook ground enough times to know what they’re going to hit at 18 inches and again at 36. That local knowledge changes how we set posts, how we weld hinge plates, and how we brace solid infill gates against lake wind shear.
Every job we complete in Benbrook is covered by our written 90-Day Done Right Promise. If something isn’t right, we come back and make it right. No paperwork, no arguing. And when you call, a live person answers, 24 hours a day, seven days a week. You won’t get a voicemail tree or a callback queue.
Our Gate Parts & Welding team is led by Victor Salinas, who has spent decades working on the specific failure patterns we see in this part of Tarrant County. We’re background-checked, uniformed, and we work in your home the way we’d work in our own mother’s.
Our Gate Parts & Welding Services in Benbrook
Hinge Replacement
Benbrook’s shrink-swell clay cycle is hardest on hinges, especially the bottom hinge on swing gates. When the post heaves even half an inch, the hinge takes the full load and the gate starts to bind. We replace worn or seized hinges with heavy-gauge steel rated for the weight of your gate, and we weld them to the existing frame rather than bolting when the frame has already started to rack.
Post Replacement
This is the most common structural repair we do in Benbrook, and the one where local soil knowledge matters most. A post set in August can be out of plumb by spring, not because the installer did poor work, but because the expansive clay beneath the caliche caprock swelled after winter rain. We dig deeper than the caprock layer, set the post below the active soil zone, and pour a footing that can handle the movement. When a post has heaved, replacing it correctly usually runs $350 to $700 in Benbrook depending on whether we’re working with wood fence posts or steel driveway gate posts set in concrete.
Rail Repair
Rails fail two ways in Benbrook. On wood gates backing to greenbelts and creekways, cedar rails rot where they meet the stiles, especially after a wet season. On iron gates around Benbrook Lake, rails crack at the weld points when wind load flexes the frame. We repair both, welding steel frame sections and replacing rotted wood with pressure-treated material that can handle the moisture.
Custom Welding
When a 1990s iron gate has racked out of square, off-the-shelf parts won’t fix it. We do custom welding on site: reinforced hinge plates, gusseted corners, new bottom rails for sagging frames, and infill panel repairs after hail damage. Victor Salinas welds to the original frame so the repair follows the existing lines of the gate rather than fighting them.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Benbrook
Whether your gate opener is a Linear, a Viking, or a Ghost Controls, our technicians are trained and equipped on all of them, plus six other major brands. We carry common parts for Benbrook jobs on the truck, which means most repairs don’t wait on a parts order. On the lake side of Benbrook, we see more DoorKing units on older estate gates, and we keep matching hardware for those systems in stock. The right part, installed once, with the automation tested before we leave.
Common Gate Parts & Welding Problems We See in Benbrook Homes
- Posts heaving out of plumb: Benbrook sits at the Cross Timbers transition zone. Installers hit caliche caprock, stop the footing, and the post feels solid. Then wet clay below the rock expands, pushes the post up, and the gate binds. We set footings below the active zone so the post stays where it belongs.
- Solid infill gates catching wind shear: Lake-adjacent properties around Benbrook Lake get genuine wind load off the water. Solid iron or cedar infill acts like a sail, bending hinge posts and cracking 1990s masonry columns at the footing. We brace and gusset these gates to handle the exposure.
- Cedar slats split by hail: Tarrant County sits in one of Texas’s most active hail corridors, and Benbrook takes hits on a near-annual basis. Split cedar slats leave swing gates misaligned and too light, which makes them slam and bind as the posts shift in saturated soil. We replace the infill and reset the alignment.
- Weld cracks at frame corners: Older iron gates in Benbrook develop fatigue cracks where the top rail meets the hinge stile. It starts small and grows fast once the gate starts flexing. We grind the old weld, re-weld with proper penetration, and often add a gusset so the crack doesn’t return.
Pricing for Gate Parts & Welding in Benbrook, TX
Here’s what Benbrook homeowners can expect to pay. Hinge replacement on a standard swing gate: $180 to $340. Post replacement with a properly deep footing through caliche: $350 to $700 depending on post size and whether we’re pulling an old concrete footer. Custom welding repairs like a cracked frame corner or a bent hinge plate: $220 to $520. Full gate frame straightening and re-hanging on a 1990s iron estate gate: $600 to $1,200. We quote the job before any work starts, in writing, and the price doesn’t move. Call (817) 562-7979 for an exact quote. Estimates are free.
Storm and Wind Exposure Around Benbrook Lake
Benbrook is one of the only places in Tarrant County where gate posts have to punch through caliche caprock before they reach the shrink-swell clay beneath. A post set perfectly plumb in August can bind its swing-gate hinges by spring because the clay below heaves after winter rain while the caliche above barely moves. That’s not a theoretical problem. It’s the leading structural failure mode we see in Benbrook, and it’s why a generic post replacement doesn’t last.
Our crew was called out to a 1990s estate near the Benbrook Lake perimeter after a summer hailstorm split the cedar infill on a solid swing gate. When we reset the hinge post, the auger hit caliche at 18 inches, then sank into wet, expansive clay by 36. The masonry column above had already cracked, binding the bottom hinge. We welded a new reinforced hinge plate onto the existing iron frame, poured a deeper post footing through the rock layer, and got the LiftMaster keypad entry and safety photocell working again before the next front came through.
The Safe Manual-Release Procedure During a Power Cut
Thunderstorm season in Benbrook brings power cuts, and a power cut shouldn’t leave you trapped on either side of your own gate. Every automatic gate has a manual release, usually a lever or pull-cord at the opener head. On most Linear, Ghost Controls, and DoorKing units, the procedure is: locate the release lever on the motor housing, pull it (or turn the key if yours is key-locked), and the gate swings free by hand. If the gate is a heavy solid iron gate on a grade, have a second person hold it while you swing it open. Never reach through the gate to operate the release if the gate is moving. If you’re not sure where your release is, call (817) 562-7979 and we’ll walk you through it over the phone.
We Also Serve Cities Near Benbrook
In addition to Benbrook, our technicians regularly work in Fort Worth, Aledo, Azle, and Briar. If you’re outside Benbrook proper, give us a call and we’ll tell you straight whether we serve your street. We’re part of the Ironworks team serving Benbrook and the surrounding area, with dispatch coordinated from our Dallas-Fort Worth office and crews working locally in Benbrook.
Serving Benbrook, TX - Our Local Coverage Area
We’re based in the Benbrook area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Benbrook
Because “rock” in Benbrook usually means caliche caprock, and caliche sits on top of expansive clay. The installer’s auger stopped when it hit the rock layer, the post was set in concrete above it, and the clay below swelled after rain. The post rides up as the clay expands. The fix is a deeper footing that goes through the caliche and anchors below the active soil zone. That’s standard practice for our crew in Benbrook. Call (817) 562-7979 and we’ll assess your post depth and tell you what it would take to set it right.
Find the manual release on the opener head, usually a lever or a pull-cord near where the arm connects to the gate. Pull it or turn the key to disengage the motor, then swing the gate by hand. If your gate is a heavy solid iron gate, have a second person steady it. If you can’t find the release or it won’t disengage, call us at (817) 562-7979 and we’ll talk you through it, and if it’s an emergency we’ll send a technician out.
Yes, in most cases. The column often stays, and the repair happens at the frame: we cut the bent hinge ears off, weld a new reinforced hinge plate onto the existing iron, and re-hang the gate. If the masonry column itself has cracked at the footing from years of clay-soil movement, we’ll tell you straight whether the column needs stabilization before the gate can work properly. You’ll get a written price before any work starts. Call (817) 562-7979 for a free second opinion on any written estimate.
That stalling near the post is almost always a binding hinge. Benbrook’s wet spring swells the clay, the post heaves, and the gate gets tight in the swing arc right where the operator is asking it to do the most work. The motor speeds up through the middle of the travel and labors at the two ends. The fix is releasing the bind, not turning up the force. We’ll find where the frame is out of rack, fix the underlying issue, and retest the operator. Call (817) 562-7979 to get it looked at.
Yes. Texas and Tarrant County code requires automatic gates to have an entrapment protection system, and on a solid gate that means photo-eyes on both the public and private sides, plus an audible alarm on the operator. We’ve repaired and upgraded more than a few 1990s gates around the lake that predate current safety standards. We’ll show you what your gate has and what it needs, and the work is covered by our 90-Day Done Right Promise. Call (817) 562-7979 for an assessment.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Benbrook and surrounding Tarrant County communities.
If your gate post is heaving, a hinge has failed, or you need custom welding done right, call (817) 562-7979. A live person answers, 24 hours a day. We’ll give you a free estimate, a written price before any work begins, and a 90-Day Done Right Promise on every job.