Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Briar
If your gate sags, drags, or won’t close square, the fix is usually a hinge, a post, or a weld, not a whole new gate. We’re Ironworks Gate Co., and our Gate Parts & Welding crew serves Briar property owners with same-week scheduling and a written 90-Day Done Right Promise on every job. Most hinge replacements and weld repairs on Briar acreage run $220 to $640, and we quote the number before any work starts. Call (817) 562-7979 and a live person answers.
Why Ironworks Gate Co. Is Briar’s Preferred Gate Parts & Welding Company
Briar is not a subdivision town. The properties out here off North US Highway 287 and South US Highway 287 are working acreage: horse pastures, cattle fences, long gravel drives. The gates are heavy pipe-and-panel steel, and they fail differently than the ornamental iron you see in Fort Worth. We know that before we ever pull a wrench, because we have been crawling under sagging farm gates and re-welding corner posts across Parker County for decades.
Victor Salinas leads our team, and he holds every technician to the same standard: check the post first, then the hinge, then the operator. That order matters in Briar. The black clay here swells when it rains and contracts hard in a drought, and a post that was plumb six months ago can lean three inches out by August. If we reset the hardware without fixing the footing, we’re just scheduling your next call. We don’t work that way. Our technicians are background-checked, uniformed, and they treat your gate like it belongs to their own mother.
Our Gate Parts & Welding Services in Briar
Hinge Replacement
A worn hinge on a 16-foot pipe gate puts every pound of that gate’s weight on the latch side, and then the gate starts dragging across the gravel. In Briar, we see this constantly on older ranch gates where the original hinges were welded on forty years ago and never greased. We cut out the old hardware, weld on heavy-duty barrel or adjustable hinges sized for the actual gate weight, and shim the post so the gate swings true. A typical hinge replacement on a Briar farm gate runs $180 to $390.
Post Replacement
Briar’s expansive clay is the real story here. A gate post set in a shallow footing gets heaved and leaned within a few hard wet-dry cycles. Off West Rock Island Avenue and down the county roads, we regularly dig out posts that were set only 18 inches deep with a bag of quick-mix. We set new posts at proper depth, usually 36 inches or more for a heavy swing gate, with a concrete collar that resists the heave. Post replacement in Briar typically runs $350 to $800, depending on the gate weight and how much of the old footing has to come out.
Rail Repair
When a gate drags, the bottom rail takes the abuse. We see bent and cracked rails on Briar cattle gates where a horse leaned on the top rail or a truck clipped the corner. We straighten what can be saved, cut out and weld in new schedule-40 pipe where it can’t, and reinforce the corner joints so the gate keeps its square. Rail repair on a typical Briar pipe gate runs $150 to $420.
Custom Welding
Some gates need more than a patch. If you’re extending a fence line, adding a pedestrian pass-through, or building a new gate to match the existing pipe-and-panel style on your acreage, we weld on site. We work in steel, and we build to the weight and wind load your gate actually carries, which on a Briar property with open pasture and no windbreak is a lot more than a suburban builder ever planned for. Custom welding for gate work starts around $200 and runs up from there; we quote the full number before we strike an arc.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Briar
Most gate parts and welding calls end with the opener needing attention too, and we service the brands Briar homeowners actually have on their driveways. DoorKing and Elite operators are common on automated estate gates here, and we keep their hinge brackets, actuator arms, and limit switches in stock for Briar service calls. We also work on Ghost Controls and Mighty Mule units, which show up on a lot of manual gates that owners automated later. Whatever the brand, we arrive with the parts on the truck and finish most jobs in one visit.
Common Gate Parts & Welding Problems We See in Briar Homes
- Leaning hinge posts from clay movement. Briar’s black gumbo soil expands and contracts with every rain and drought cycle. A post set shallow heaves out of plumb, and the gate sags and binds. We check post depth and footing before touching any hardware.
- Cracked welds at the rail-to-post connection. When the post leans and the gate still gets forced open and shut, the weld at the corner is what fails first. North Texas ice storms make it worse: a frozen actuator arm or a stuck latch means someone shoves the gate harder than the steel can take.
- Builder-grade openers that overheat and strip gears. Newer exurban homesteads in Briar often came with the cheapest opener the builder could find. Plastic gears and undersized actuators die fast in a Parker County summer. We swap them for commercial-grade units that can move a heavy farm gate without burning out.
- Manual gates with no power run. Plenty of Briar acreage gates were built manual and worked that way for years. When owners decide to automate, there’s usually no conduit, no power, and no keypad wiring. We trench new lines and install solar kits or hardwired openers, depending on the driveway.
Pricing for Gate Parts & Welding in Briar, TX
Here are straight numbers for the most common jobs we do in Briar. Hinge replacement: $180 to $390 per gate. Post replacement: $350 to $800, with deeper footings and heavier collars on the high end. Rail repair: $150 to $420. Custom welding: starts at $200 and is quoted per job. Cracked weld repair at a corner post: $120 to $280. If the opener needs attention at the same time, we’ll quote that separately before any work starts. You’ll know the full number, agreed in writing, before a single bolt gets turned. Call (817) 562-7979 for a free estimate at your Briar property.
We Also Serve Cities Near Briar
While this page is about Gate Parts & Welding in Briar, our crews work the same rural gate territory in Fort Worth, Aledo, Azle, and Benbrook. If your property sits just across the county line, the same pricing, the same written promise, and the same live-answer phone line apply.
Serving Briar, TX - Our Local Coverage Area
We’re based in the Briar area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Briar
Because the post is almost certainly leaning, not the hinge loosening. Briar’s expansive black clay heaves posts out of plumb with every wet-dry cycle, and tightening the hinge bolts just masks the real problem. The fix is resetting the post deeper with a proper concrete collar, then re-hanging the gate. Call (817) 562-7979 and we’ll check the post depth before quoting anything.
Yes, and we do it regularly in Briar. Most manual gates on acreage were never trenched for power, so we run new conduit from the house or panel, set a keypad or solar panel depending on the gate location, and install an opener matched to the gate’s actual weight. A heavy pipe gate needs a commercial-duty operator, not a big-box kit. Call us for a free site visit and written quote.
Replace it with a commercial-duty swing gate operator built for heat and weight. The builder-grade units installed on new Briar exurban homes often have plastic gears and undersized motors that overheat in North Texas summers. We install LiftMaster and FAAC operators that hold up on heavy farm gates, and we stock the parts locally. Call (817) 562-7979 to talk through the right size for your gate.
Usually not. If the steel is sound, we dig out the old footing, reset the post at proper depth with a concrete collar sized for the gate weight, and weld on new hinges as needed. You get a square gate without paying for new steel. If the post itself is rotted at ground level or the welds are cracked through, we’ll tell you honestly and quote the replacement. Estimates are free.
It can be. A crack at the corner post or where the rail meets the post usually means the gate was already stressed from post movement, and the ice storm finished the job. We’ll inspect the weld, check the post for lean, and repair or replace the joint so it holds. In Briar, the soil movement is the underlying problem, so fixing the weld without checking the footing is a temporary patch. Call (817) 562-7979 and we’ll look at it on site.
If your gate is leaning, sagging, or cracked, don’t wait for it to fail completely. Call Ironworks Gate Co. at (817) 562-7979 for a free estimate on gate parts and welding in Briar. Victor Salinas and our crew know this soil, these gates, and the right way to fix them. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Briar and the surrounding Parker County acreage.