Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Fort Worth
Gate installation in Fort Worth means dealing with two things most other Texas cities don’t: Blackland Prairie clay that heaves posts out of plumb, and a remarkable number of wide acreage entrances even inside city limits. A new driveway gate here has to be hung on footings that will stay true through wet springs and 105°F summers, and the operator has to be matched to the actual weight and span of the gate, not a guess from a catalog. We’re the Fort Worth gate company that gets both right. If you’re planning a new gate on a ranch property off Alta Mere Drive or a ornamental iron driveway entrance in Wedgwood, call (817) 562-7979 for a free on-site estimate and a written quote before any work begins.
Why Ironworks Gate Co. Is Fort Worth’s Preferred Gate Installation Company
We’ve been doing gate work across Fort Worth long enough to know the difference between a gate that looks straight on day one and a gate that is still closing right three wet seasons later. The local soil here expands and contracts more than almost anywhere else in the metro. Homeowners in Ridglea and along the Hulen corridor call us after handyman-installed gates start dragging six months in, and the cause is almost always the same: the post was set in concrete without accounting for the clay underneath. We set posts deeper, and when the soil demands it, we use helical-pier footings that anchor below the active clay layer. That’s the kind of Fort Worth-specific judgment a general contractor doesn’t bring.
We carry a written 90-Day Done Right Promise on every installation. If the gate isn’t right, we come back and make it right. No paperwork, no arguing. That’s the Keystone Standard we’ve applied to every job for over 42 years, and it’s why Fort Worth homeowners who have lived in the same house for twenty years trust us with the next twenty.
When you call, a live person answers. Not a voicemail, not an answering service. 24 hours a day, 7 days a week. And when our background-checked, uniformed technicians arrive in Fort Worth, they work in your yard the way they would work in their own mother’s. Led by Victor Salinas, our installers are trained and equipped on nine gate-automation brands, so the correct motor is specified for your gate the first time, whatever style you’re hanging.
Our Gate Installation Services in Fort Worth
Driveway Gate Installation
A driveway gate in Fort Worth has to handle more than just opening and closing. On the Blackland Prairie, the posts carry the weight of the gate while the ground underneath them shifts with every rain and dry spell. We set footings with the local soil in mind, and we match the operator to the actual measured weight of the gate. Whether you’re on a quarter-acre lot in Fairmount or a five-acre horse property near Benbrook Lake, you’ll get a gate that opens every time, year after year. See more about our Gate Installation process and what a full install includes.
Pedestrian Gate Installation
Pedestrian gates are the quiet workhorses of Fort Worth backyards, usually built lighter than driveway gates and therefore more likely to bind when the ground shifts. We hang them on posts set for the long term, with hinges sized for the gate’s actual weight and latches that hold through a hard north wind. If you’re running an automatic pedestrian entrance off a side driveway, we can tie the access control into the same keypad or intercom system as your main vehicular gate.
Sliding Gate Installation
Sliding gates make sense on Fort Worth properties where a swing gate would eat up too much driveway real estate, especially on angled entrances along roads like Bryant Irvin or Chapel Creek Boulevard. A sliding gate needs a level track bed and a firm base, two things the local clay does not give you for free. We prepare the track subgrade so the gate rolls smooth instead of grinding over a cracked, sunken slab, and we specify operators from brands like DoorKing and Elite for cantilever and V-track configurations.
Swing Gate Installation
Swing gates are the most common style across Fort Worth, from ornamental iron double gates in Walsh Ranch to heavy pipe gates on ranch acreage off White Settlement Road. The posts carry everything, so the post is the job. We check existing post plumb on every install call, and when the ground has tilted a post even a few degrees, we reset or stabilize it before hanging anything new. A swing gate can only operate smoothly for years if its posts are true, and only a Fort Worth gate company checks that before the first hinge goes on.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Fort Worth
We install and service gate operators from Ghost Controls, DoorKing, Elite, and Mighty Mule, among others. Fort Worth’s mix of suburban ornamental gates and rural agricultural gates means a one-brand shop isn’t much use. We’re certified across nine major opener brands, including LiftMaster, FAAC, BFT, Linear, and Viking, so we can specify the right motor for a 20-foot double gate at a ranch entrance or a compact swing gate on a Hulen-area bungalow. Parts for common Fort Worth installs are stocked locally, which keeps turnaround fast when something needs replacing.
Common Gate Installation Problems We See in Fort Worth Homes
- Post footings set in expansive clay shift seasonally. A gate that was perfectly hung in April drags by August because the post under it moved. We see this on every side of Fort Worth, from Wedgwood to Presidio, and the fix is resetting or helical-pier anchoring the footing, not adjusting hinges.
- Wide agricultural pipe gates overwhelm undersized residential operators. A 16-foot pipe gate weighs several hundred pounds, and a light-duty opener rated for a suburban aluminum gate will strip its rack and pinion gears within a season. Fort Worth has more wide farm entrances inside city limits than any comparable Texas metro.
- Solar gate openers on long driveways fail without a backup battery. Months of heavy overcast, or a panel knocked out of alignment by livestock, can leave a solar-only opener dead. We spec solar systems with battery backup and panel protection for Fort Worth’s acreage properties.
- Gates that won’t latch after a hard freeze. North Texas temperature swings, including February 2021’s Winter Storm Uri, make metal gate frames expand and contract enough to throw latches and strike plates out of alignment. We align for the full seasonal range, not just the weather on install day.
Pricing for Gate Installation in Fort Worth, TX
A single ornamental steel driveway gate in Fort Worth typically runs $2,800 to $6,500 installed, including the operator. A double swing gate across a standard residential driveway usually lands between $5,000 and $11,000, depending on the gate material and the operator’s duty rating. Wide agricultural pipe gates in the 14 to 20-foot range, common on Fort Worth acreage, run $7,500 to $15,000 or more when solar power, battery backup, and entrapment-protection sensors are included. Pedestrian gates range from $1,200 to $3,800. The exact number for your property depends on the gate’s size and weight, the post condition, and the power source, and we quote it in writing before a single bolt is turned. Call (817) 562-7979 to schedule a free measure and estimate.
We Also Serve Cities Near Fort Worth
Our crews run gate installation jobs throughout the Fort Worth area, including Haltom City, North Richland Hills, Hurst, and Kennedale. If your property is in one of those cities, or anywhere else in Tarrant County, we bring the same clay-soil expertise and the same written promise. Read more about our Gate Installation in Fort Worth coverage and what to expect on install day.
Serving Fort Worth, TX - Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Fort Worth
Yes, absolutely. A farm or ranch pipe gate that’s 14 to 20 feet wide weighs hundreds of pounds more than a suburban ornamental gate, and it needs a heavy-duty operator with a higher duty cycle, often a ram-style or industrial linear actuator. A light-duty residential opener on a wide pipe gate will fail, usually by stripping the gear teeth, within the first year or two. Fort Worth has more of these wide agricultural entrances inside city limits than any other large Texas metro, so we match the operator to the gate’s measured weight and cycle frequency, not its price. Call (817) 562-7979 and we’ll come measure.
Because the Blackland Prairie clay under your post is moving, not the gate. This soil swells when it rains and shrinks when it dries, and the cycle is aggressive enough to tilt a correctly installed post 3 to 5 degrees out of plumb within two or three seasons. No hinge adjustment or strike plate move will hold until the post is reset or anchored below the active clay layer, which is why we check post plumb on every Fort Worth install call. The post is the job.
You can, and on Fort Worth acreage it’s often the most practical option when trenching for mains power would run hundreds of feet. A proper solar setup for a gate opener needs a panel sized for the operator’s draw, a battery bank for overcast days and night cycling, and a protected panel location so livestock or brush don’t knock it out of alignment. We installed exactly this on a 20-foot swing gate in the Walsh Ranch area, running solar because mains power wasn’t practical that far from the house, and we included a safety photocell across the wide entrance for the owner’s livestock trailers. Call (817) 562-7979 for a solar gate quote.
Yes. Any new automatic gate installation in Fort Worth must include entrapment protection: photo eyes or contact edges that reverse the gate if a person, child, or vehicle is in the path. This isn’t optional equipment, and we don’t install an automatic gate without it. On wide acreage entrances where a horse trailer or delivery truck might be in the swing path, we also recommend additional photocells spaced for the full gate travel. We’ll spec the right sensor package for your entrance and include it in the written quote.
In many Fort Worth HOA communities, including Alliance and Walsh Ranch, the association’s architectural guidelines specify not just the gate’s appearance but sometimes the operator type, and a gate that doesn’t match the HOA’s rules can trigger a violation notice. We’ve installed enough gates in these communities to know what the HOAs typically look for, and we’ll help you submit a design that passes review without slowing down your install. Bring us your HOA’s gate guidelines and we’ll work from them. Call (817) 562-7979 with any questions.
Get Your Fort Worth Gate Installation Started
If you’re ready for a gate that’s set right, powered right, and backed in writing, call Ironworks Gate Co. at (817) 562-7979. We’ll schedule a free on-site measure, give you a written quote before any work begins, and stand behind the finished job with our 90-Day Done Right Promise. Victor Salinas and our Fort Worth installation crews are ready when you are.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Fort Worth and the surrounding area with honest, guaranteed gate work for over 42 years.