Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Kennedale
Gate installation in Kennedale runs $2,800-$9,500 for most driveway gates, with sliding gates on the higher end and pedestrian gates starting around $900. A proper installation includes post footings, gate fabrication or assembly, operator mounting, safety edges, and full testing, which typically takes one to two days on site. If you’re calling from Kennedale, you’ll reach a live person at (817) 562-7979, not a voicemail tree. We’ve been setting gates in this part of Tarrant County long enough to know what the ground under your driveway is going to do before we dig the first hole.
Why Ironworks Gate Co. Is Kennedale’s Preferred Gate Installation Company
Kennedale is a small town, and word travels here. We’ve set gates on Sonora Drive, along Kennedale New Hope Road, and up in the hillside lots off Little School Road. Homeowners in this area tend to keep their properties for decades, and they remember the contractor who showed up late or left a gate that rattled in the wind. That’s not how we work.
Victor Salinas runs Ironworks Gate Co. the same way it’s been run since 1984: answer the phone, give a square price, do the work, and stand behind it. Our written 90-Day Done Right Promise covers every installation. If something isn’t right, we come back and make it right. No paperwork, no arguing.
Our crews serve Kennedale directly from our Dallas-Fort Worth office, and we quote every job up front, before a single bolt is turned. We’re background-checked and uniformed, and we treat your driveway the way we’d treat our own mother’s. The 400th job gets the same care as the first.
Our Gate Installation Services in Kennedale
We build and install the full range of residential gates, and each type has its own set of considerations on Kennedale’s terrain. Here’s what that looks like in practice.
Driveway Gate Installation
A driveway gate in Kennedale does more than mark the property line. It’s the first thing you see pulling up Sublett Road after work. We size operators to the actual weight and cycle count of the gate, not just whatever’s on sale. On wider Kennedale lots with long gravel drives, we recommend slide gates over swing gates. Gravel kicks up crushed limestone dust, and a swing gate’s arc needs clear space anyway.
Swing Gate Installation
Swing gates are the most common style we install in Kennedale, especially double swing gates on older ranch-style properties. The hinge posts are the critical part. Kennedale sits on a limestone ridge, and shallow footings here fail. We bore deeper than the minimum, set posts in properly cured concrete, and we don’t guess at the depth. The result is a gate that swings true years later, not one that scrapes the driveway by spring.
Sliding Gate Installation
Sliding gates are a smart choice for Kennedale driveways that slope or have limited swing clearance. But the track matters. Unsealed tracks on local drives collect limestone dust, which binds the rollers and strips the rack and pinion. We set slide tracks on a compacted, sealed base and spec operators that can handle the drag a dusty Kennedale summer brings.
Double Gate Installation
Double gates look right on wider entrances, and we hang a lot of them along Kennedale’s larger lots south of 287. The challenge is keeping both leaves square. If one post settles even half an inch, the gate leaves separate at the center or misalign at the latch. Our crews set both posts in the same pour, on the same day, and check both leaves for level before the concrete sets.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Kennedale
We’re trained and equipped on nine major gate-automation brands, including Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters on a service call, because the correct fix happens on the first visit, whatever’s mounted on your driveway. We also keep common parts on the truck, so a Kennedale job doesn’t stall while someone drives across the metroplex for a control board.
Common Gate Installation Problems We See in Kennedale Homes
These are the failure points we run into most often on Kennedale properties. If any of them sound familiar, call us before the gate gets worse.
- Hinge posts heaving in clay soil. Kennedale’s clay swells after spring rains and shrinks in summer. Posts set in shallow concrete crack at the base, and the gate starts to lean. We use deeper footings and proper drainage so the post stays put.
- Slide tracks binding with limestone dust. Crushed limestone driveways are common on Kennedale’s larger lots. That fine dust works into unsealed tracks and wears down the rack. We seal the base, and the track rolls clean.
- Undersized solar openers on shaded or overcast drives. Winter overcast stretches are hard on battery-powered solar openers. We size solar systems for the actual winter sun pattern on the property, not the summer peak.
- Poorly set double gate posts. Two posts set at slightly different depths or times settle unevenly. The leaves drift out of alignment, and the latch stops catching. We pour both posts together and level the gate before anyone walks away.
Pricing for Gate Installation in Kennedale, TX
A single swing gate with a standard opener in Kennedale typically runs $3,200-$5,800. A double swing gate runs $5,500-$9,500, depending on gate width, material, and automation. Sliding gates usually fall between $4,500 and $8,500, and pedestrian gates start around $900-$1,800 without automation.
Labor, concrete, hardware, and operator are all included in the quote. The variables are gate size, material (steel, ornamental, aluminum), whether we’re adding keypads or intercoms, and what the ground looks like once we dig. Exposed limestone near the surface can add to footing time, but we factor that in before we quote. You’ll know the full price before we start, and the quote is the price. Every time.
We Also Serve Cities Near Kennedale
While this page is about gate work in Kennedale, our Gate Installation team regularly serves homeowners in Fort Worth, Haltom City, Hurst, and Bedford. If you’re just outside Kennedale, call us. If we can get a crew to your driveway, we’ll quote it honestly.
Serving Kennedale, TX - Our Local Coverage Area
We’re based in the Kennedale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Kennedale
In nearly every case, the hinge post was set too shallow in soil that moves. Kennedale’s clay swells and shrinks with moisture, and a post set in a 24-inch footing will lean before the first year is out. We drill deeper into the limestone shelf and pour a properly sized footing so the post doesn’t move. If you’ve already got a leaning gate, call us at (817) 562-7979 and we’ll tell you if it’s salvageable or needs a re-set.
Yes. UL 325 compliance requires entrapment protection on any automatic gate, and that includes photo eyes, safety edges, and proper reversal testing. We run the full reversal test on every automated install in Kennedale, in front of the homeowner. It’s not optional, and we won’t skip it to save time. You’ll see the gate reverse with your own eyes before we call the job done.
We can, but the base preparation is different than on concrete. Limestone gravel kicks dust into the track, so we compact and seal the track base before mounting the rack. We also size the operator for the extra drag. Done right, a slide gate on gravel works fine. Done wrong, it strips the rack within a season. We do the prep work most crews don’t bother with.
Hillside lots change the geometry of the gate swing and the drainage around the posts. On slopes, we often recommend a slide gate instead of a swing, or we build stepped mountings so the gate doesn’t bind. Water runoff also concentrates around the posts on sloped ground, so we pay extra attention to drainage. These are the details that keep a hillside gate square and smooth for years.
Most residential installations take one to two days on site. That includes footing excavation, concrete cure time, gate hanging, operator mounting, and full safety testing. Some jobs take longer if we’re working around exposed limestone or building a custom gate from scratch. We’ll give you a written timeline before we start, and we’ll be there when we say. Call (817) 562-7979 and we’ll schedule a free measure and written price.
Get a Free Gate Installation Estimate in Kennedale
If you’re in Kennedale and need a new gate, or you’re tired of nursing an old one along, call us. You’ll get a live person on the phone, a straight answer, and a free estimate with no obligation. We serve the neighborhoods along Kennedale New Hope Road, Little School Road, and Dick Price Road, and we’ll be there when we say. Call (817) 562-7979 and let’s get your gate done right.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Kennedale since 1984.