Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Haslet
A gate motor or opener repair in Haslet typically runs $180-$640, and a full slide gate operator installation with safety edges and battery backup lands between $1,900 and $3,800 depending on gate weight, power access, and the condition of your post footings. We get it right the first time by addressing the real problem, not the symptom, and we never start a bolt until you’ve seen the written price. Call (817) 562-7979 and a live person answers, 24 hours a day, 7 days a week.
Ironworks Gate Co. has been fixing and installing gate motors long enough to know that Haslet gates fail differently than gates in Keller or North Richland Hills. Your soil, your weather, and the way your gate was originally set all change what a proper repair or install needs. We plan for that. We set deeper footings than most shops because we know what happens when we don’t.
Why Ironworks Gate Co. Is Haslet’s Preferred Gate Motor & Opener Company
We’re not the low-bid crew that disappears after the check clears. We’re the gate and gate-automation specialist that Haslet homeowners call when the gate has already been “fixed” once by somebody else and failed again. Our technicians are background-checked, uniformed, and work in your driveway the way they would work in their own mother’s. Led by Victor Salinas, our team has been at gate work for over 42 years, founded in 1984, and we plan to be in this area for another forty.
Every job we complete in Haslet is protected by our written 90-Day Done Right Promise. If it is not right, we come back and make it right. No paperwork, no arguing, no exceptions. We put that in writing on every single job, from a motor swap off Haslet-Rhome Road to a full slide gate automation in Northstar.
We carry common repair parts on our trucks so most Haslet jobs are completed in a single visit. A live person answers every call, any hour, any day. You won’t get a voicemail tree. You’ll get us.
Standing offers: $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a permanent 5% senior and veteran discount. Always.
Our Gate Motor & Opener Services in Haslet
Motor Installation
A proper gate motor installation in Haslet starts with the footing, not the opener. Most Haslet gate posts were originally set by fence crews working to a price, not to the soil. We check plumb, we check depth, and we often re-set or reinforce the post before we mount a new operator. Then we install the motor, run the power or mount the solar panel, wire the safety edges and photocells, and run full UL 325 entrapment-reversal tests. That’s the only way a gate leaves our hands. Our Gate Motor & Opener work is done once, correctly, and guaranteed in writing.
Motor Repair
When a gate motor in Haslet fails, the cause is usually not the motor itself. It’s a post that’s leaned a quarter inch and bound the gate. Or a control board that took a spike during a summer storm. Or a loop detector in the ground that got nicked or shifted. We diagnose the actual fault before we replace anything. A repair on a Viking or Ghost Controls opener in Haslet typically takes one to two hours on site once we’re at the gate. We quote the price first, you approve it, and then we turn a single bolt.
Linear Motor
Linear gate openers use a screw-drive or belt-driven carriage that pulls the gate along a rail. They’re common on lighter slide gates in Haslet. We service and install Linear-brand operators, plus nine other major automation brands, and we stock common carriage assemblies and drive components so we’re not waiting on a distributor when your gate is stuck. The clay soil here doesn’t tolerate a misaligned rail for long, so we check the entire run before and after any linear motor installation.
Slide Motor
Slide gate operators move the heaviest gates in Haslet, the big welded steel estate gates on Avondale-Haslet Road and in the acreage subdivisions. These installs demand a squared rail, a solid rack and pinion, and an operator with enough duty cycle for your gate’s weight and length. We service LiftMaster, FAAC, BFT, DoorKing, and Elite slide operators, and we always test entrapment reversal under load before we call the job done. In the Northstar neighborhood, our crew replaced a failing LiftMaster slide operator on a welded steel gate that had torn its rack and pinion after the post footing settled half an inch. We reset the footing, realigned the rack, installed a new LiftMaster with a loop detector and safety photocells, then ran full entrapment tests. The gate opens without binding and stops immediately on obstruction.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Haslet
We’re certified and equipped to service nine gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Whatever is on your driveway, we know it. For Haslet customers we commonly service Viking, Ghost Controls, and DoorKing openers, and we keep common control boards and limit switches for those brands on the truck. That means fewer return trips for our neighbors in Haslet. When a replacement part isn’t on the shelf locally, our parts network gets it to us fast.
Common Gate Motor & Opener Problems We See in Haslet Homes
- Clay-heavy soil under the hinge post. Haslet sits near where the Fort Worth Basin’s clay-rich soils meet the drier, sandier loams of the Cross Timbers. The clay expands when wet and shrinks in dry spells, so a hinge post can lean within a year or two. That binds the gate and strips the opener’s drive gear. We set deeper footings and check plumb on every install because of this exact soil pattern.
- Storm damage to control boards. Summer thunderstorms and brief power dips knock out control boards on older slide gate operators that lack a battery backup, leaving gates stuck half-open. A battery backup is one of the best investments a Haslet homeowner can make for a motorized gate.
- Damaged or shifted loop detectors. Loop detectors buried in Haslet’s shallow, rocky clay get nicked by fence-post diggers or shift with soil movement, so the gate won’t auto-open for exiting cars. We replace and retune them as part of motor repair work.
- Worn rack and pinion on slide gates. When a post footing settles even half an inch on a slide gate, the rack and pinion no longer mesh evenly. The opener works harder, draws more current, and burns out. We see this pattern constantly in Haslet. The fix is not just a new opener, it’s a realigned rail and a corrected footing.
Pricing for Gate Motor & Opener in Haslet, TX
Gate motor repair in Haslet typically runs $180-$640, depending on the fault. A control board replacement on a Viking or Ghost Controls opener runs $350-$800. A new slide gate operator installation lands between $1,900 and $3,800, and that includes the motor, rail, rack, safety photocells, wiring, and UL 325 compliance testing. A battery backup add-on runs $250-$550 installed, and a loop detector replacement or retune is $150-$350. Every price is quoted and agreed before any work starts, and the number we quote is the number you pay. No surprises on the bill. A square deal.
We Also Serve Cities Near Haslet
From our Dallas-Fort Worth office, scheduling crews directly serve Haslet and the surrounding communities. We take gate motor and opener calls in Keller, North Richland Hills, Haltom City, and Azle as well. Same standard of work, same written 90-Day Done Right Promise, same live person on the phone day or night.
Serving Haslet, TX - Our Local Coverage Area
We’re based in the Haslet area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Haslet
For a motorized gate in Haslet, we set post footings at a minimum of 36 inches deep, and often deeper for heavy slide gates, with a wider bell at the bottom than most standard fence crews pour. Haslet’s clay-rich soil expands and contracts more than the sandier loam in Keller or North Richland Hills, so shallow footings lean within a year or two. We also use a compacted gravel base below the concrete so water drains away from the post. A footing that shifts after the motor goes on is a thousand-dollar repair. Call (817) 562-7979 for a free site assessment, and we’ll tell you what your existing posts need.
Yes, we install solar gate openers on slide gates in Haslet, but the reality is that solar works best on lighter gates with modest daily cycles. Haslet gets plenty of sun, but those summer thunderstorms mean your battery bank needs to be sized for cloudy stretches, and that adds cost. If grid power is available within a reasonable run from your gate, it’s almost always the more reliable long-term choice. If it’s not, we build a solar system that works for your gate’s weight and how often it cycles. Either way, we’ll quote both options clearly before you commit.
Every motorized gate we install in Haslet complies with UL 325, which requires two independent forms of entrapment protection: typically safety photocells across the gate opening, plus either contact edges on the gate itself or an inherent reversing mechanism in the operator. We test every install under load, not just on a test bench, and we adjust the reverse sensitivity so the gate stops and reverses immediately on contact or obstruction detection. That’s not optional paperwork. It’s the difference between a gate that’s legal and a gate that’s dangerous.
A typical slide gate operator installation in Haslet takes one full day for the mechanical work: setting and bracing the footing if needed, mounting the operator, aligning the rail and rack, and wiring the controls. If we’re doing a complete install with a new post, groundworks, conduit, and power run, plan on two days. We do not promise same-day installation, because a proper gate motor installation is measured, ordered, and scheduled. You’ll get a written start date and a straight answer on how long it takes. Call (817) 562-7979 for a free measure and a written quote.
Yes. A battery backup keeps your gate opener running through the brief power dips and outages that Hasslet’s spring thunderstorms bring. The unit sits inline between your power source and the operator, switches to battery automatically when line voltage drops, and recharges when power returns. For a gate that has left you stuck after a storm, it’s the single most useful addition we can make, especially on older slide gate operators. We install them on LiftMaster, FAAC, BFT, and most other brands we service. Expect to pay $250-$550 installed, quoted upfront before any work starts.
Get Your Haslet Gate Working Right, Once
If your gate motor is grinding, half-open, dead after a storm, or you’re ready to automate a gate that’s been manual for twenty years, call Ironworks Gate Co. at (817) 562-7979. We’ll talk about what’s actually happening, not what’s easy to sell. A live person answers, day or night, and we’ll schedule a free estimate with a written price before any work begins. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Haslet and the surrounding communities since 1984.