Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across North Richland Hills
A stuck or sagging gate in North Richland Hills usually comes down to one of three things: a tired motor, a post that has shifted in clay soil, or a hinge that has carried too much weight for too long. Most repairs run between $180 and $480 and we complete the majority of them in a single visit. If your gate will not open or close, call (817) 562-7979 and a live person answers, 24 hours a day. We have been fixing driveway gates for over 42 years and we know exactly what North Richland Hills weather does to steel, motors, and the ground beneath them.
Why Ironworks Gate Co. Is North Richland Hills’s Preferred Gate Repair Company
Homeowners across North Richland Hills call us because we do not treat a gate like a side job. We treat it like a piece of the house that has to work every morning at 6:30 and every night at 10:00, rain or shine. Our technicians are background-checked and uniformed, and they work the way they would work in their own mother’s driveway. Victor Salinas built this company on a simple rule: do the job right, stand behind it in writing, and answer the phone when it rings. That rule has not changed.
North Richland Hills sits right on the Tarrant-Dallas county line, so our trucks cover neighborhoods on both sides of the metroplex boundary. We know the difference between a subdivision off Rufe Snow Drive with 1970s steel tube gates and a newer build near Smithfield with ornamental iron and a modern opener. That local knowledge matters when a hinge post has shifted and the fix is not just bending the panel back, but resetting the footing underneath it.
Every job we complete in North Richland Hills carries the 90-Day Done Right Promise. That is a written guarantee, not a handshake. If something is not right, we come back and make it right. No paperwork, no arguing, no exceptions. Call (817) 562-7979 and you will speak to a person, not a voicemail tree.
Our Gate Repair Services in North Richland Hills
Electric Gate Repair
When an electric gate in North Richland Hills stops responding to the remote or keypad, the problem usually lives in the control board, the receiver, or a wiring connection that has corroded after a wet spring. We service nine major automation brands, including Gate Repair work on Linear, Viking, Ghost Controls, and DoorKing systems. Most electric gate repairs in North Richland Hills run $200 to $400 and are finished the same day we arrive.
Automatic Gate Repair
Automatic gate failures in North Richland Hills often trace back to two local culprits: clay soil movement and storm water. A slide gate that was perfectly aligned in October can start grinding in March after the ground swells and shifts the track. We reset posts, realign tracks, and replace worn rack and pinion gears so the gate travels smooth again. A typical automatic gate repair in this area runs $250 to $480 depending on whether the motor, the track, or both need attention.
Hinge & Post Repair
Hinge and post problems are the most common repair we handle in North Richland Hills. The clay-heavy soil here expands and contracts through wet-dry cycles, which slowly pushes posts out of plumb. That puts uneven load on the hinges, which then wear faster than they should. We do not just weld a cracked hinge and call it done. We check the post footing, correct the alignment where possible, and use heavier hinge stock if the gate demands it. Expect to pay $180 to $350 for most hinge and post repairs in North Richland Hills.
Gate Realignment
A sagging gate is a safety problem, not just a cosmetic one. In North Richland Hills, realignment calls spike after rainy springs because the soil under the post has actually moved. We reset the post, shim or pour where needed, and hang the gate so it closes square and latches without force. Gate realignment in North Richland Hills typically runs $200 to $400, depending on whether we need to reset one post or two.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in North Richland Hills
We are trained and equipped to repair openers from Linear, Viking, Ghost Controls, and DoorKing, along with five other major automation brands. Because we carry common boards, gears, receivers, and safety photocells on the truck, most North Richland Hills repairs are completed the same day. You will not wait a week for a part to ship in from somewhere else. Whether your gate runs on a solar Ghost Controls unit or a hardwired Linear operator, we have the diagnostic tools and the parts to get it working again.
Common Gate Repair Problems We See in North Richland Hills Homes
- Shifting posts from clay soil expansion. North Richland Hills sits on expansive clay that swells after rain and contracts in dry heat. Posts that were straight last summer can be out of plumb by spring, and that sag will not fix itself by adjusting the panel.
- Storm-damaged safety photocells. Summer thunderstorms push water into poorly sealed junction boxes, tripping photo eyes and stopping automatic gates cold. We replace the seal, dry the box, and test the reversal loop before we leave.
- Worn rack and pinion teeth on older slide gates. Years of sand and silt working into the track grind the teeth down until the gate jerks, grinds, or stops mid-travel. We have replaced stripped pinion gears on gates all over North Richland Hills, including a LiftMaster unit off Davis Boulevard.
- Failed hinge welds on heavy ornamental gates. Older North Richland Hills homes often have custom iron gates that weigh more than the original hinges were sized for. We weld and reinforce rather than replace, extending the life of the gate another decade or more.
We were called out to a home off Davis Boulevard where a LiftMaster slide gate was grinding and stopping mid-travel. The rack and pinion had been installed without a proper post footing on the clay-heavy soil, so the whole track had shifted. Our crew reset the footing, realigned the rack, and replaced the stripped pinion gear. The gate rolls smooth now, and the loop detector picks up the car every time.
Pricing for Gate Repair in North Richland Hills, TX
Here is what North Richland Hills homeowners can expect to pay. Electric gate repair: $200 to $400. Automatic gate repair: $250 to $480. Hinge and post repair: $180 to $350. Gate realignment: $200 to $400. Lock repair: $120 to $220. Weld and rust repair: $150 to $300 for spot work, more if we are replacing a rotted bottom rail.
The price you are quoted before we start is the price you pay. No surprises on the bill. We also extend a $50 credit on any repair over $250, a free second opinion on any written estimate, and a permanent 5% discount for seniors and veterans. Call (817) 562-7979 for an exact quote. Estimates are free.
We Also Serve Cities Near North Richland Hills
Our North Richland Hills crews regularly cross into Hurst, Bedford, Haltom City, and Keller for gate repairs, installations, and opener work. If you live near the Tarrant-Dallas line, you are in our service area. Read more about what we do on our North Richland Hills page or call us directly and we will tell you when a truck can be at your house.
Serving North Richland Hills, TX - Our Local Coverage Area
We’re based in the North Richland Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in North Richland Hills
The clay soil under your hinge post absorbs water, swells, and loses structural grip, which lets the post lean a fraction of an inch. That fraction becomes a visible sag at the latch side. The permanent fix is resetting the post footing and re-hanging the gate, not just cranking the hinge bolts tighter. Call (817) 562-7979 and we will inspect the post before recommending anything.
Most full automatic gate installations in North Richland Hills take two to four weeks from measure to final programming, because we order the operator, schedule the groundworks, and test safety edges and reversal force before we call it done. We do not promise same-day installation on a new gate. You will get a written timeline and a fixed price before any work starts.
For most repair work, no permit is required in North Richland Hills. If we are replacing a post footing, pouring new concrete, or running new electrical, a permit may be needed depending on the scope. We handle that conversation with the city directly so you are not guessing. We never start work that should be permitted without the paperwork in order.
The most common post-storm fix in North Richland Hills is a wet junction box that tripped a safety photocell or shorted the low-voltage circuit. We open the box, dry and reseal it, replace any corroded wire, and test the reversing safety loop. Most storm-damaged opener repairs run $200 to $350 and are done the same visit.
Yes. We service Ghost Controls solar openers across North Richland Hills, including battery replacement, panel repositioning, receiver programming, and full motor replacement when the arm is worn out. Solar openers on shaded lots off Rufe Snow Drive often need a panel relocated to get enough sun. We will test output and mounting angle before we swap any parts.
Call Ironworks Gate Co. for Gate Repair in North Richland Hills
If your gate is sagging onto the driveway, grinding on its track, or refusing to open at all, call (817) 562-7979. A live person answers every call, 24 hours a day, 7 days a week. We will quote your repair up front, complete most jobs in one visit, and back every part and every hour of labor with the written 90-Day Done Right Promise. That is how Victor Salinas has run Ironworks Gate Co. for over 42 years, and that is how we serve North Richland Hills today.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving North Richland Hills and the surrounding DFW metroplex.