Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Briar
Gate installation in Briar typically runs $2,800 to $9,500 for a complete automated driveway gate, depending on width, material, and how much trenching is needed. For a manual farm-style swing gate on pipe posts, most Briar properties land between $1,400 and $3,200. We install, automate, wire, weld, and stand behind the whole job in writing. If you live off East Rock Island Avenue, West Rock Island Avenue, or anywhere along the SH 114 corridor, call (817) 562-7979 and we will schedule a time to walk your property, measure the opening, and hand you a straight written price.
Why Ironworks Gate Co. Is Briar’s Preferred Gate Installation Company
Briar is not Fort Worth, and a gate company that treats it like a suburb gets it wrong. This is unincorporated Parker County acreage, where the driveways are gravel, the lots are measured in acres, and the gates are built for horses, cattle, and ranch trucks rather than curb appeal. We have spent decades working these properties, and we know the difference between a subdivision gate and a working farm gate. The post holes need to be deeper. The conduit needs to be trenched because it was never run during the build. The operators need loop detectors on the driveway side, because a builder-grade unit will not see your truck coming up the gravel.
Victor Salinas leads our crews, and he runs every Briar job the same way: square posts, a real concrete collar, wiring sleeved in PVC, and an opener that is actually matched to the gate’s weight and swing, not whatever came in the box at the home center. We answer the phone when you call, and we show up when we say we will.
You are getting a live person on the line 24 hours a day, 7 days a week. Not a voicemail tree. Not an answering service. That matters on a ranch gate that will not close at 6 a.m. when you are trying to leave for work, or at 9 p.m. when the horses are out.
Our Gate Installation Services in Briar
We install the whole range of gates you see on Briar acreage, from a simple pedestrian gate by the house to a 24-foot automated double swing at the road. Every job gets the same treatment: measured, priced upfront, and installed by a uniformed technician who has done this hundreds of times. Here is what we handle most in this part of Parker County.
Swing Gate Installation
Swing gates are the workhorse of Briar. Most properties here have a double swing or a wide single swing at the road, usually tubular steel on pipe posts. We set posts 4 feet deep with a 12-inch concrete collar, because the black clay here will heave anything shallower out of square within a season or two. We hang the gate, weld the hinges, and match the operator to the actual weight of the leaf. A heavy 16-foot farm gate needs a different opener than a light driveway gate, and we do not guess at that.
Driveway Gate Installation
Your driveway gate is the one you use every day, multiple times a day. It needs to open reliably in July heat and January ice, and it needs to see your vehicle before you are sitting there waiting on it. Most Briar driveway gates are 12 to 20 feet wide, and we build them to handle the weight of a steel gate plus a North Texas wind load. Whether you want a new Gate Installation from scratch or you are ready to automate a gate the builder left manual, we price it the same way: square deal, written down, before any work starts.
Sliding Gate Installation
Sliding gates make sense on Briar properties where the ground slopes away from the driveway or where a swing gate would need too much clearance. But here is what we see far too often: a sliding gate track set on a gravel pad that settles with every wet-dry cycle, and within a year the rack and pinion are binding and the drive gear is stripped. We pour a proper concrete track pad, set the gate on a cantilever or V-track system that does not drag, and sleeve the operator wiring so the clay soil cannot pull it apart.
Pedestrian Gate Installation
Not every entrance is for vehicles. A pedestrian gate by the house, at the barn, or along a fenceline off West Rock Island Avenue gets the same post depth and the same square-hang treatment as the big driveway gate. We install walk gates with a proper latch, closers where you want them, and keypad or keyed entry options that match what the main gate uses. No flimsy hardware. No gate that drags in the dirt after one rain.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Briar
We install and service openers from DoorKing, Elite, LiftMaster, and the rest of the major brands, because Briar properties rarely have just one brand on the property. You might have a LiftMaster on the front gate and an older Viking unit on the back pasture entrance. We carry parts for all of them, and we are trained and equipped on nine gate-automation brands, so the unit gets fixed or installed right the first time. We do not sell you a new opener just because we do not stock the board for the one you have.
Common Gate Installation Problems We See in Briar Homes
- Posts that lean after one dry summer. The expansive black clay in this part of Parker County shrinks hard in drought and swells after rain. A post set 2 feet deep with a bag of redi-mix will lean 2 to 3 inches out of plumb by August. That throws the gate geometry off, and then the opener starts grinding or the gate starts dragging.
- Builder-grade openers that were never right from day one. The operator went in when the house went up, but nobody ran a loop detector on the driveway side. The gate does not see your own truck coming, so it cycles late or not at all. You sit there waiting, or you get out and punch the keypad anyway. That is not an automation problem. That is an installation problem.
- Manual gates with an opener bolted on later, and nothing else. We see this all over Briar: a manual double swing on a horse property, someone bolts a residential opener to the post, and there is no keypad and no safety photocell. The family still gets out of the car to open the gate, and the gate is not UL 325 compliant. Automating a gate means the whole system: operator, keypad, photocells, and the wiring that connects all of it.
- Sliding gate tracks on gravel that will not hold still. A track laid on crushed rock settles with the wet-dry cycle, the gate binds, and the drive gear strips within the first year. The fix is a proper concrete pad and a track system that does not drag. We do it right the first time, because going back to re-dig a track in this clay is nobody’s idea of a good afternoon.
Pricing for Gate Installation in Briar, TX
A manual pipe-and-panel farm gate in Briar runs $1,400 to $3,200 installed, depending on width and whether we are setting new posts or hanging on existing ones. An automated single swing driveway gate runs $3,800 to $6,500. A full automated double swing at the road, 16 to 20 feet wide, lands between $5,500 and $9,500. Sliding gates run $4,500 to $8,000 when you include the concrete track pad. The final price depends on the gate width, the opener you choose, post depth work, and how much trenching is needed for conduit and low-voltage wire. Here is the thing: the price we quote is the price you pay. We settle it in writing before a single bolt is turned. We do not come back at the end with a change order because the clay was harder than we thought. Call (817) 562-7979 and we will walk the property with you, measure everything, and hand you a written number. Estimates are free.
We Also Serve Cities Near Briar
Our crews work throughout the northwest corridor, so if you are across the line in Fort Worth, Aledo, Azle, or Benbrook, we can handle your gate work too. Most of our Gate Installation in Briar customers send their friends and family from nearby towns, and we are glad to take the call. Same square deal, same written guarantee.
Serving Briar, TX - Our Local Coverage Area
We’re based in the Briar area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Briar
Briar sits on the same expansive black clay that runs through Parker County, but the difference is the soil is less disturbed out here. Fort Worth subdivisions were graded and compacted during development. Briar acreage is mostly native clay, and it shrinks hard in drought and swells after rain. A post set 2 feet deep will heave and lean within one hard summer. We set posts 4 feet deep with a 12-inch concrete collar as standard on Briar jobs, because anything less is a repeat call. Call (817) 562-7979 if you want us to look at a leaning post before it takes the opener with it.
Nine times out of ten, the opener is fine and the installation is not. The most common issue on newer Briar builds is no loop detector on the driveway side. A builder-grade opener without a loop does not know your truck is there until it is already too close, so it cycles late or not at all. The second common issue is post depth: the builder set the posts shallow to save time, the clay moved them, and now the gate geometry is off. We diagnose the whole system, not just the opener. Call (817) 562-7979 for a free estimate.
Yes, and we do it regularly out here. The key is that the posts have to be right first. If they are set deep and still plumb, we can hang operators directly. If they have moved, we reset them before touching any automation. For the wiring, we bore a clean horizontal run from the house panel to the hinge post rather than trenching across the gravel, so your driveway stays intact. We add a keypad and safety photocells so the gate is actually UL 325 compliant. Call (817) 562-7979 and we will come look at what you have.
Four feet deep, with a 12-inch concrete collar at the base, as standard on any gate post in Briar. The collar gives the post a wider footprint in the clay so the wet-dry cycle cannot pull it out of square. We also check the soil at each post location, because pockets of sandier fill near the SH 114 corridor can need a different approach. Post depth is the single biggest factor in whether a gate still works right five years from now. Call (817) 562-7979 for a written quote on your gate.
Yes. Any automated gate with a motor is required to meet UL 325 entrapment protection standards, regardless of how long the driveway is or how remote the property feels. That means safety photocells, a reversing edge or equivalent, and proper force settings on the opener. The fact that it is a rural property off US 287 does not change the code requirement, and it does not change the safety reality if a child, a pet, or a delivery driver is in the gate’s path. We install every automated gate with entrapment protection as standard, never as an upsell. Call (817) 562-7979 to talk about your gate.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Briar and the surrounding Parker County communities.