Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Everman
Gate installation in Everman runs $2,400 to $9,800 for most residential jobs, with the final number set by gate size, automation, and how much ground work the soil demands. We don’t rush an Everman install out the door with a same-day promise, because the blackland clay under this part of Tarrant County does not reward shortcuts. What we do promise is a written price before the first hole gets dug, a gate hung square and plumb, and a 90-Day Done Right Promise in writing on every job. When you’re ready to talk specifics, call (817) 562-7979.
Why Ironworks Gate Co. Is Everman’s Preferred Gate Installation Company
We’ve been doing gate work for over 42 years, and Everman homeowners tend to like us for the same reasons they like their neighbors: we answer the phone, we show up when we say, and we do not make a job sound smaller than it is. Victor Salinas runs our crews here, and the standard he sets is simple. If a gate is not right, we come back and make it right. No paperwork, no arguing. That promise is written into every Everman job we take.
Homeowners here remember the last contractor who left them waiting. That is not how we operate. A live person answers our phone 24 hours a day, seven days a week, including weekends and storm nights. When you call about a gate installation near Everman Parkway or over by Oak Grove Road, you are talking to someone who knows the area, not a call center reading a script.
Our technicians are background-checked and uniformed. They treat your driveway the way they’d treat their own mother’s. We work under the K.E.Y.S. code: Krafted right, Every time, Your home first, Standing behind it. The 400th Everman job gets the same care as the first one ever did.
Our Gate Installation Services in Everman
Driveway Gate Installation
A driveway gate in Everman has to handle more than just opening and closing. The clay soil under your driveway expands and contracts with moisture through the year, and that movement transfers straight into the gate posts. We set post footings 36 inches deep with rebar and gravel drainage as standard here, because an 18-inch footing that works in Fort Worth will lean within a few seasons in Everman’s river bottom ground. Most Everman driveway gates run $3,200 to $7,500 installed, depending on the gate width and whether you want automation.
Pedestrian Gate Installation
Pedestrian gates in Everman run the same risks as driveway gates: shallow footings fail in the shifting blackland clay, and a gate that scrapes today gets worse after every storm. We build pedestrian gates with the same deep footing and drainage standard, whether the gate is five feet wide or fifteen. You’ll typically see $1,400 to $3,800 for a new steel pedestrian gate with hardware and proper footings. Most jobs finish in a single visit once the material is on site.
Sliding Gate Installation
Sliding gates are the workhorse for wider Everman driveways where a swing gate would eat too much of the yard. The catch here is debris. Everman sits low along the Trinity River bottom, and after a hard rain, silt and trash wash up over the track and rack. We install slide gates with elevated cantilever or V-track systems sized for that debris load, so the gear teeth do not strip out in a season. Sliding gate installation in Everman typically runs $4,500 to $9,800, and includes the power run, safety edges, and entrapment sensor setup.
Swing Gate Installation
Single and double swing gates are the most common choice in Everman’s older subdivisions, and the most common failure we see is a hinge post leaning toward the house. That lean comes from the soil pushing against an undersized footing. Our standard here is a 36-inch footing with a wider concrete base than what code technically requires, because the Trinity bottom land demands it. A single swing gate installation in Everman runs $2,400 to $5,200. A double swing gate, which is really two gates meeting in the middle, runs $4,800 to $9,200 with full automation.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Everman
Ironworks Gate Co. is trained and equipped on nine gate-automation brands, and for Everman customers that matters because the wrong opener choice will have you cursing the gate every time another storm rolls through. We install and service Ghost Controls, DoorKing, Elite, and Mighty Mule systems among others, and we stock the common parts those brands need so a repair or swap out is not waiting on a parts truck from another state. Whatever is on your driveway, our technicians have likely seen it, wired it, and programmed it before.
Common Gate Installation Problems We See in Everman Homes
- Leaning hinge posts from shallow footings. The blackland clay under Everman swells in wet weather and shrinks in dry weather. An 18-inch post footing eventually tilts, the gate sags and drags, and within a couple of years it will not close. We fix this at the root with deeper, wider footings and drainage gravel.
- Missing UL 325 entrapment protection on older gates. Many Everman gate installations from the 1990s and early 2000s lack the photocell sensors and contact edges that modern code requires. A gate without that protection can close on a car, a child, or an adult. We pressurize-test the reversal function on every gate we install or repair.
- Rack-and-pinion slide gates clogged with Trinity River silt. After heavy rains, the low-lying parts of Everman collect silt that packs into the rack teeth and smokes the motor. We set slide gates for clearance and choose drive systems that can shed the debris instead of chewing it.
- Storm damage bending gate frames and pulling hinges. Everman gets its share of straight-line wind. A hollow, lightweight gate frame will twist. We weld solid steel frames with corner gussets, sized for what the weather actually does here, not what a showroom gate looks like indoors.
Pricing for Gate Installation in Everman, TX
Here is what Everman homeowners should expect, straight up. A pedestrian gate runs $1,400 to $3,800. A single driveway swing gate runs $2,400 to $5,200. A double swing gate with full automation runs $4,800 to $9,200. A sliding gate runs $4,500 to $9,800. The biggest cost drivers in Everman are the depth of the post footings, the height and width of the gate, and the brand of automation you choose. We quote the full scope before any bolt turns: the concrete, the steel, the motor, the safety sensors, and the keypad. You agree to a number, and that is the number on the invoice. No add-ons. Estimates are free, and a live person at (817) 562-7979 will schedule a measure at your convenience.
We Also Serve Cities Near Everman
While Everman is home base for this page, our crews regularly work in Fort Worth, Aledo, Azle, and Benbrook as well. If you have a property outside Everman proper, call us and we’ll tell you straight up how soon we can get there. You can also review our full Gate Installation service line for more detail on the work we do across this part of Texas.
Serving Everman, TX - Our Local Coverage Area
We’re based in the Everman area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Everman
Your swing gate sags after heavy rain because the blackland clay under Everman swells when it gets wet, pushing against a shallow post footing and tilting the hinge post. Once the post leans, the gate leaf droops at the latch end and starts dragging. The permanent fix is resetting the post in a 36-inch footing with rebar and gravel drainage, then re-hanging the gate on adjustable hinges. Call (817) 562-7979 and we’ll measure the lean and quote the repair exactly.
No, you do not strictly need a loop detector, but if you have any type of automated sliding gate in Everman you do need some form of vehicle detection and entrapment protection, and a loop is the most reliable way to get both. A loop buried in the driveway tells the gate when to open for your car and when to hold if a car is in the way. Without one, your gate relies on a keypad or remote and can start moving with a vehicle in the travel path. We install loop detectors on most sliding gate jobs in Everman by default.
Proper entrapment protection means your gate operator has working safety sensors or contact edges that reverse the gate immediately when something blocks its path, and that the reversal pressure has actually been tested. Look for photocells mounted low on each side of the gate opening, especially on older Everman homes where the original install predates the UL 325 standard. If you do not see them, or if the gate does not reverse when you put some pressure on it, call us. We test this on every gate we touch, including the 90-Day Done Right Promise jobs.
A solar gate opener can work in Everman, but not always well. The trigger is the gate’s daily cycle count and the amount of shade and storm debris over your panels. In Everman’s long hot summers, a solar package sized for a lightly used single swing gate is fine. A double gate that cycles ten times a day with an opener from Ghost Controls or Mighty Mule will probably need a larger panel and a battery bank with real capacity. We will size the solar package honestly, and if it is better to run line voltage, we will say so instead of handing you a system that dies in the rain.
A new double swing gate installation in Everman typically takes one to two full working days on site, depending on how much concrete work the footings need and whether the power is already run to the gate line. The process includes digging and setting footings, allowing the concrete to cure sufficiently, hanging each leaf, mounting the opener, wiring the safety sensors and keypad, and programming the system. We will not promise a same-day installation, because concrete poured in Everman’s clay needs a chance to set before the weight of the gate goes on it. Call (817) 562-7979 for a schedule quote tied to your specific driveway and gate size.
The Everman Soil Problem, Solved Before It Becomes One
Everman sits in the Trinity River bottom land of southeastern Tarrant County, and that location drives almost everything we do differently here. The blackland clay moves. It swells with spring rain and summer downpours, then cracks in August heat. A gate post set shallow will scoot and tilt under that pressure, and a gate hung on that post will sag and fail. The installers who work mostly in Fort Worth or Arlington can get away with lighter footings because the soil profile there drains differently and holds less water. Everman does not give that grace. We dig footings deeper, pour wider bases, and add gravel drainage and rebar where a bid from another shop might not bother. That single difference in preparation is the difference between a gate that functions for ten years and one that fails in eighteen months. It is also why our Gate Installation in Everman clients tend to call us once and then never call anyone else.
A Recent Everman Installation
Our crew recently installed a Viking swing gate operator on a double driveway gate for a home off Everman Parkway. The first thing we found was the existing hinge post leaning three inches toward the house, because the original footing was only 18 inches deep. We set a new 36-inch post footing with rebar and gravel drainage, then hung the gate with adjustable hinges and added a safety photocell pair across the driveway before programming the keypad entry. The whole job took a day and a half on site, and the gate opens and closes smooth as the day we hung it. That is the standard. Every time. The 400th job gets the same care as the first one, because Victor Salinas would not have it any other way.
Get a Free Everman Gate Installation Estimate
If you are in Everman and thinking about a new gate, a gate opener, or fixing a gate that no longer closes, call (817) 562-7979. A live person answers, 24 hours a day, seven days a week. We’ll set a time to measure your driveway, talk through your options, and hand you a written price before any work starts. The estimate is free. The price we quote is the price you pay. And the 90-Day Done Right Promise is in writing, on every single job we do in Everman.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving the Dallas-Fort Worth area since 1984.