Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Forest Hill
When a gate post leans or a weld cracks in Forest Hill, you need a crew that shows up ready to cut, weld, and re-hang without a three-week wait. We run service calls into Forest Hill neighborhoods off Mansfield Highway, Wichita Street, and Anglin Drive throughout the week, and our phone line is answered by a live person around the clock at (817) 562-7979. Most hinge replacements and rail repairs we handle in Forest Hill are completed in a single visit, with the price settled before we strike an arc. Our Gate Parts & Welding team works on swing gates, slide gates, and estate gates of every era, from 1970s ranch homes to newer builds off Forest Hill Drive.
Why Ironworks Gate Co. Is Forest Hill’s Preferred Gate Parts & Welding Company
Forest Hill homeowners tend to hold onto their properties for decades. That means the gate that was hung in 1995 is often still the gate standing today, and it carries the history of every Tarrant County summer and freeze behind it. We understand that a sagging gate here is rarely a simple hinge swap. It is usually a hinge post that was set in clay soil without a deep enough footing, or a weld that fatigued over thirty years of use. We do not patch a symptom and drive away. We find the actual failure and repair it so the gate hangs square and swings clean.
Our crews arrive in marked trucks, wearing uniforms, and they treat your property the way they would treat their own mother’s driveway. Victor Salinas built Ironworks Gate Co. on a simple standard: the 400th job gets the same care as the first. That standard holds on every post replacement, rail repair, and custom weld we perform in Forest Hill. Every completed job carries our written 90-Day Done Right Promise. No paperwork games. If it is not right, we come back and make it right.
We have been serving the Dallas-Fort Worth area since 1984, and our dispatch coordinates Forest Hill calls from our DFW office, so a technician familiar with the streets and gate styles of this part of Tarrant County is never far away. You will also find our standing offers apply to every Forest Hill job: $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a permanent 5% discount for seniors and veterans.
Our Gate Parts & Welding Services in Forest Hill
Hinge Replacement
Forest Hill swing gates take a beating from summer heat that bakes the metal and winter freezes that make old welds brittle. Hinge replacement here usually means cutting out the original barrel hinges from the post and the gate frame, welding in new hinge assemblies rated for the gate’s weight, and re-hanging so the gate clears the ground without dragging. We match the hinge thickness to the existing gate so the repair does not look like an afterthought.
Post Replacement
This is the most common structural repair we perform in Forest Hill. The clay-heavy soil under Forest Hill shifts with moisture, and hinge posts set on shallow footings lean inward over time. We cut the old post at the ground, excavate the footing, set a new steel post in concrete at the proper depth for this soil, and re-weld the gate. On a recent job off Mansfield Highway, we replaced a rusted hinge post on a swing gate: after cutting out the old post footing and re-setting it in concrete, our tech welded a new steel post and re-hung the gate, then dialed in the operator’s close limit so the latch lined up without slamming.
Rail Repair
Slide gate rails in Forest Hill take impact from cars, weather, and years of rollers grinding against them. A rail with a bowed section or a worn top edge will cause the gate to shudder or stall. We straighten or section-replace damaged rail, weld it square to the gate frame, and align the rollers so travel is smooth. For gates on uneven terrain common in older Forest Hill lots, we also check the track bed and adjust the roller heights to compensate for grade changes.
Custom Welding
Some Forest Hill gates are ornamental, with scrollwork and pickets that date back decades. When a picket snaps or a decorative finial rusts through, off-the-shelf parts do not exist. We fabricate replacements from matching steel stock, weld them in, and treat the finished repair so it weathers like the original. We also weld reinforcement plates onto gate frames that have cracked at stress points, which is common on heavier estate gates operated by automatic openers.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Forest Hill
Our technicians are trained and equipped on nine automation brands, so when a Forest Hill gate opener needs a part or a weld-adjacent repair, the correct fix happens on the first visit. We regularly service Viking, Ghost Controls, and DoorKing openers installed across Forest Hill driveways, along with LiftMaster, FAAC, BFT, Linear, Elite, and Mighty Mule. We carry common replacement parts for these systems, which means less waiting on a part to ship to a Forest Hill home when a gate is stuck closed.
Common Gate Parts & Welding Problems We See in Forest Hill Homes
- Slide gate rollers wearing unevenly. Forest Hill’s clay-heavy soil shifts the track over freeze-thaw cycles, which throws the gate out of level and chews one roller faster than the other. We replace the rollers and re-level the track so wear evens out.
- Hinge posts leaning inward. A post footing that was not deep enough for Tarrant County soil will tilt and cause the swing gate to drag on the high side. Post replacement with a proper concrete set is the real fix.
- Weld cracks at the rack and pinion mount. Repeated torque from the gate operator on a slide gate will eventually crack the weld at the rack mount. The crack goes unnoticed until the gate stalls mid-travel one morning.
- Rusted lower rails and pickets. Gates near sprinkler spray or standing puddles, which Forest Hill’s flat lots tend to collect after heavy rain, rust through at the bottom rail first. Rail repair or section replacement gets the gate back square before the rust creeps upward.
Pricing for Gate Parts & Welding in Forest Hill, TX
You will know the number before we start work. Hinge replacement in Forest Hill typically runs $180 to $420 per hinge set, depending on gate weight and whether the post needs reinforcement. Post replacement, including concrete and welding, usually lands between $450 and $1,100 per post. Rail repair runs $250 to $700, and custom welding is quoted at $95 to $175 per hour plus materials. Gate rollers are $40 to $140 each installed. These are the ranges we quote across Forest Hill, from older streets near Mansfield Highway to newer developments off Anglin Drive. The final price is written down and agreed to before a single bolt is turned. Call (817) 562-7979 for a free estimate.
We Also Serve Cities Near Forest Hill
While this page focuses on Gate Parts & Welding in Forest Hill, our crews also take calls in Fort Worth, Aledo, Azle, and Benbrook. If your gate is just across the city line, the same crew, the same written promise, and the same upfront pricing apply. Forest Hill is our home base for this part of Tarrant County, but we are glad to drive a few extra miles to a neighbor.
Serving Forest Hill, TX - Our Local Coverage Area
We’re based in the Forest Hill area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Forest Hill
If the gate itself is cracked or the hinge welds have failed, we can often weld and repair the gate in place. If the post is leaning, we replace the post and set a new steel one in concrete. In Forest Hill, post lean is usually the root cause, not the gate. We inspect both and only replace what actually needs replacing. Call (817) 562-7979 and we will assess yours.
After any repair involving the opener or safety circuit, we test the photocell by blocking the beam while the gate is closing. The gate must stop and reverse. We also test the reversing edge on the gate itself. You will see the test result before we leave. That is part of the 90-Day Done Right Promise on every Forest Hill job.
Yes. A post that is thinner than the original will flex and fail early. We measure the existing post wall thickness and match or exceed it with the replacement steel, then weld it to the gate with the same care as the original build. It will look like it belongs to the gate.
In most cases, just the roller needs replacing. We sell and install individual rollers rather than pushing a full track replacement unless the track itself is damaged or badly out of level. On Forest Hill’s clay soil, we also check the track bed for settling while we have the gate rolled back.
Yes. Welds do not degrade from sun exposure, but they do need proper preparation and material matching. We strip paint and rust to clean steel before welding, and we use a weld material that matches the gate’s steel so it expands and contracts with the Texas heat just like the original. The finish is coated to keep moisture out of the join.
Get Your Forest Hill Gate Working Right - And Keep It That Way
You have had a gate for years and you want it to keep working for years more. That is what we do. Call Ironworks Gate Co. at (817) 562-7979 for a free estimate on hinge replacement, post replacement, rail repair, or custom welding in Forest Hill. We will show up when we say, quote the job before work begins, and stand behind it with the written 90-Day Done Right Promise. One call, one fix, done right.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Forest Hill and the surrounding Tarrant County area since 1984.